Migration timing influences the responses of birds to food shortage at their refuelling site

Because migration is highly time-constrained and migration timing varies among individuals, the responses of migrants to food shortage at a refuelling site could differ between individuals that arrive early and late at the site. To test this hypothesis, we compared the stopover decision, in terms of occurrence and length of stay (LOS), of radiotagged Great Knots Calidris tenuirostris before (2012) and after (2015) a dramatic decline in food supply at a critical spring final pre-breeding refuelling site in the northern Yellow Sea. The probability of occurrence at the refuelling site was consistent between the two\ua0years, whereas the average LOS significantly shortened in the year of food shortage in late-arriving individuals. This suggests migration timing intensifies the influence of food shortage in late-arriving individuals, which might be more sensitive and vulnerable to food shortage at refuelling sites compared with early-arriving individuals

Optimization of gas-filled quartz capillary discharge waveguide for high-energy laser wakefield acceleration

A hydrogen-filled capillary discharge waveguide made of quartz is presented for high-energy laser wakefield acceleration (LWFA). The experimental parameters (discharge current and gas pressure) were optimized to mitigate ablation by a quantitative analysis of the ablation plasma density inside the hydrogen-filled quartz capillary. The ablation plasma density was obtained by combining a spectroscopic measurement method with a calibrated gas transducer. In order to obtain a controllable plasma density and mitigate the ablation as much as possible, the range of suitable parameters was investigated. The experimental results demonstrated that the ablation in the quartz capillary could be mitigated by increasing the gas pressure to similar to 7.5-14.7 Torr and decreasing the discharge current to similar to 70-100 A. These optimized parameters are promising for future high-energy LWFA experiments based on the quartz capillary discharge waveguide

Ultralow-emittance measurement of high-quality electron beams from a laser wakefield accelerator

By designing a cascaded laser wakefield accelerator, high-quality monoenergetic electron beams (e beams) with peak energies of 340–360MeV and rms divergence of <0.3 mrad were produced. Based on this accelerator, the e-beam betatron radiation spectra were measured exactly via the single-photon counting technique to diagnose the e-beam transverse emittance in a single shot. The e-beam transverse size in the wakefield was estimated to be ~0.35 lm by comparing the measured X-ray spectra with the analytical model of synchrotron-like radiation. By combining the measured e-beam energy and divergence, the normalized transverse emittance was estimated to be as low as 56 um mrad and consistent with particle-in-cell simulations. These high-energy ultralow-emittance e beams hold great potential applications in developing free electron lasers and high-energy X-ray and gamma ray sources

Enhanced betatron radiation by steering a laser-driven plasma wakefield with a tilted shock front

We have experimentally realized a scheme to enhance betatron radiation by manipulating transverse oscillation of electrons in a laser-driven plasma wakefield with a tilted shock front (TSF). Very brilliant betatron x-rays have been produced with significant enhancement both in photon yield and peak energy but almost maintain the e-beam energy spread and charge. Particle-in-cell simulations indicate that the accelerated electron beam (e beam) can acquire a very large transverse oscillation amplitude with an increase in more than 10-fold, after being steered into the deflected wakefield due to the refraction of the driving laser at the TSF. Spectral broadening of betatron radiation can be suppressed owing to the small variation in the peak energy of the low-energy-spread e beam in a plasma wiggler regime. It is demonstrated that the e-beam generation, refracting, and wiggling can act as a whole to realize the concurrence of monoenergetic e beams and bright x-rays in a compact laser-wakefield accelerator

Path-Following Control of Wheeled Planetary Exploration Robots Moving on Deformable Rough Terrain

The control of planetary rovers, which are high performance mobile robots that move on deformable rough terrain, is a challenging problem. Taking lateral skid into account, this paper presents a rough terrain model and nonholonomic kinematics model for planetary rovers. An approach is proposed in which the reference path is generated according to the planned path by combining look-ahead distance and path updating distance on the basis of the carrot following method. A path-following strategy for wheeled planetary exploration robots incorporating slip compensation is designed. Simulation results of a four-wheeled robot on deformable rough terrain verify that it can be controlled to follow a planned path with good precision, despite the fact that the wheels will obviously skid and slip

Discovery of a Magnetic Topological Semimetal Eu3_3In2_2As4_4 with a Single Pair of Weyl Points

Magnetic Weyl semimetal (MWS) is a unique topological state with open surface Fermi arc states and other exotic transport phenomena. However, most reported MWSs show multiple pairs of Weyl points and complicated Fermi surfaces, which increases the difficulty of the investigation into the intrinsic chiral transport property. In this wor, we successfully synthesized a soft magnetic Weyl semimetal Eu$_3$In$_2$As$_4$ with a single pair of Weyl points under magnetic fields. The Shubnikov de Haas (SdH) oscillation with a single frequency, as well as a linear hall resistance with the same carrier density, is observed up to 50 Tesla, indicating a single pair of Weyl points around the Fermi level with a massless fermion ($m^* = 0.121 m_0$, $\pi$ Berry phase). Such a single pair of Weyl points is further confirmed by the density functional theory calculations. The magnetic ordering and band topology can be easily tuned by the external magnetic field. The field-induced MWS Eu$_3$In$_2$As$_4$ with a single pair of Weyl points is a good platform to detect chiral transport properties, including possible quantum anomalous Hall effect

Fully gapped topological surface states in Bi2_2Se3_3 films induced by a d-wave high-temperature superconductor

Topological insulators are a new class of materials, that exhibit robust gapless surface states protected by time-reversal symmetry. The interplay between such symmetry-protected topological surface states and symmetry-broken states (e.g. superconductivity) provides a platform for exploring novel quantum phenomena and new functionalities, such as 1D chiral or helical gapless Majorana fermions, and Majorana zero modes which may find application in fault-tolerant quantum computation. Inducing superconductivity on topological surface states is a prerequisite for their experimental realization. Here by growing high quality topological insulator Bi$_2$Se$_3$ films on a d-wave superconductor Bi$_2$Sr$_2$CaCu$_2$O$_{8+\delta}$ using molecular beam epitaxy, we are able to induce high temperature superconductivity on the surface states of Bi$_2$Se$_3$ films with a large pairing gap up to 15 meV. Interestingly, distinct from the d-wave pairing of Bi$_2$Sr$_2$CaCu$_2$O$_{8+\delta}$, the proximity-induced gap on the surface states is nearly isotropic and consistent with predominant s-wave pairing as revealed by angle-resolved photoemission spectroscopy. Our work could provide a critical step toward the realization of the long sought-after Majorana zero modes.Comment: Nature Physics, DOI:10.1038/nphys274

Hybrid capillary discharge waveguide for laser wakefield acceleration

A hybrid capillary discharge waveguide formed by injecting low-pressure hydrogen (< 3.8 Torr) into a pure ablative capillary is presented to supply the stable guiding for multi-GeV laser wakefield acceleration. The injected low-pressure gas only provides the seed plasma for ablative discharge breakdown, like the adsorbed gas in the inner wall of the ablative capillary. With this hybrid capillary, a stable discharge with low jitter (~ 5 ns) can be achieved in a simple way, and the plasma density inside can also be controlled in a range of ~0.7 x 1018cm-3-1.2 x 1018cm-3 within a 150-ns plasma channel temporal window. Furthermore, the hybrid capillary can also be easily extended to a longer length by adding multiple segments, and femtosecond laser pulses can be well guided both in the single and multiple segments mode. With these advantages, the hybrid capillary may provide an attractive plasma channel for multi-GeV-scale laser wakefield acceleration

Electrical impedance tomography as a bedside assessment tool for COPD treatment during hospitalization

For patients with chronic obstructive pulmonary disease (COPD), the assessment of the treatment efficacy during hospitalization is of importance to the optimization of clinical treatments. Conventional spirometry might not be sensitive enough to capture the regional lung function development. The study aimed to evaluate the feasibility of using electrical impedance tomography (EIT) as an objective bedside evaluation tool for the treatment of acute exacerbation of COPD (AECOPD). Consecutive patients who required hospitalization due to AECOPD were included prospectively. EIT measurements were conducted at the time of admission and before the discharge simultaneously when a forced vital capacity maneuver was conducted. EIT-based heterogeneity measures of regional lung function were calculated based on the impedance changes over time. Surveys for attending doctors and patients were designed to evaluate the ease of use, feasibility, and overall satisfaction level to understand the acceptability of EIT measurements. Patient-reported outcome assessments were conducted. User’s acceptance of EIT technology was investigated with a five-dimension survey. A total of 32 patients were included, and 8 patients were excluded due to the FVC maneuver not meeting the ATS criteria. Spirometry-based lung function was improved during hospitalization but not significantly different (FEV1 %pred.: 35.8% ± 6.7% vs. 45.3% ± 8.8% at admission vs. discharge; p = 0.11. FVC %pred.: 67.8% ± 0.4% vs. 82.6% ± 5.0%; p = 0.15. FEV1/FVC: 0.41 ± 0.09 vs. 0.42 ± 0.07, p = 0.71). The symptoms of COPD were significantly improved, but the correlations between the improvement of symptoms and spirometry FEV1 and FEV1/FVC were low (R = 0.1 and −0.01, respectively). The differences in blood gasses and blood tests were insignificant. All but one EIT-based regional lung function parameter were significantly improved after hospitalization. The results highly correlated with the patient-reported outcome assessment (R &gt; 0.6, p &lt; 0.001). The overall acceptability score of EIT measurement for both attending physicians and patients was high (4.1 ± 0.8 for physicians, 4.5 ± 0.5 for patients out of 5). These results demonstrated that it was feasible and acceptable to use EIT as an objective bedside evaluation tool for COPD treatment efficacy