Influence of centrifugation treatment on the lubricating properties of human whole saliva

AbstractAn important function of human saliva is to serve as oral lubricant during mastication process and then effectively reduce tooth wear. Thus, centrifuged human whole saliva has been used as a substitute for human whole saliva for many in vitro studies on dental tribology. However, the difference in lubricating properties between human whole saliva and centrifuged saliva remains unclear. The objective of this study was to investigate the influence of centrifugation on the lubricating properties of human whole saliva. In this paper, the lubrication of both human whole saliva and centrifuged saliva on human tooth enamel were comparatively studied in vitro using a nano-scratch tester. The structure, composition, and mechanical properties of salivary pellicle were characterized. Result showed that food debris and high molecular weight proteins in human whole saliva were removed by centrifugation. However, the low molecular weight proteins were still in saliva. Under the lubrication of human whole saliva, the salivary pellicle formed on the enamel surface was uneven, and its mechanical properties were inhomogeneous. But a smooth and homogeneous salivary pellicle was obtained upon the enamel surface under lubrication of centrifuged saliva. Moreover, there were no significant deference in friction coefficient and wear volume of tooth enamel between human whole saliva and centrifuged saliva lubricating conditions. In summary, centrifuged saliva exhibited similar lubrication to human whole saliva. Centrifugation treatment does not impair the lubricating properties of human saliva. On the contrary centrifugation can help minimize the effect of cell and food debris

Cost‐effectiveness analysis of additional docetaxel for metastatic hormone‐sensitive prostate cancer treated with androgen‐deprivation therapy from a Chinese perspective

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/139091/1/ecc12505_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/139091/2/ecc12505.pd

Effect of corrosion-induced damage on microstructure and residual strenght of WC-Co,Ni cemented carbide

Postprint (published version

Generalized second law of thermodynamics in f(T) gravity

We investigate the validity of the generalized second law (GSL) of gravitational thermodynamics in the framework of f(T) modified teleparallel gravity. We consider a spatially flat FRW universe containing only the pressureless matter. The boundary of the universe is assumed to be enclosed by the Hubble horizon. For two viable f(T) models containing $f(T)=T+\mu_1{(-T)}^n$ and $f(T)=T-\mu_2 T(1-e^{\beta\frac{T_0}{T}})$, we first calculate the effective equation of state and deceleration parameters. Then, we investigate the null and strong energy conditions and conclude that a sudden future singularity appears in both models. Furthermore, using a cosmographic analysis we check the viability of two models. Finally, we examine the validity of the GSL and find that for both models it is satisfied from the early times to the present epoch. But in the future, the GSL is violated for the special ranges of the torsion scalar T.Comment: 16 pages, 10 figures, accepted by JCAP 201

Combining nano-silicon with oxide glass in anodes for Li-ion batteries

Vanadium-tellurite glasses (VT) have emerged as promising anode materials for lithium-ion batteries (LIBs). Despite this, the Li-ion storage capacity of the VT glass anode is still insufficient to meet the demands for the next generation of advanced LIBs. Silicon (Si) anode has ultrahigh theoretical capacity but suffers from significant volume expansion during lithiation and delithiation. In this work, we combined Si nanoparticles with VT glass to prepare Si@VT composite anode for LIBs. The composite was produced through heat-treatment at different temperatures, some of which were hot-pressed under the isostatic pressure of 100 MPa. The Si@VT composite exhibited a synergistic effect that integrated the strengths of both VT glass and Si, resulting in a substantial enhancement of its electrochemical performance. The systematic characterizations of the composite-based anodes revealed the optimal conditions for fabricating the high-performance Si@VT composite: a silicon fraction of 10 wt% and a hot-pressing temperature of 620 K. This composite stood out as the optimal choice, exhibiting a capacity of 353 mA h g−1 at 1 A g−1 after 1000 cycles. This capacity surpasses that of VT glass anode by over threefold and that of pure Si anode by twelvefold.</p

An all-solid-state laser source at 671 nm for cold atom experiments with lithium

We present an all solid-state narrow line-width laser source emitting $670\,\mathrm{mW}$ output power at $671\,\mathrm{nm}$ delivered in a diffraction-limited beam. The \linebreak source is based on a fre-quency-doubled diode-end-linebreak pumped ring laser operating on the ${^4F}_{3/2} \rightarrow {^4I}_{13/2}$ transition in Nd:YVO$_4$. By using periodically-poled po-tassium titanyl phosphate (ppKTP) in an external build-up cavity, doubling efficiencies of up to 86% are obtained. Tunability of the source over $100\,\rm GHz$ is accomplished. We demonstrate the suitability of this robust frequency-stabilized light source for laser cooling of lithium atoms. Finally a simplified design based on intra-cavity doubling is described and first results are presented

Measurements of the observed cross sections for e+e−→e^+e^-\to exclusive light hadrons containing π0π0\pi^0\pi^0 at s=3.773\sqrt s= 3.773, 3.650 and 3.6648 GeV

By analyzing the data sets of 17.3, 6.5 and 1.0 pb$^{-1}$ taken, respectively, at $\sqrt s= 3.773$, 3.650 and 3.6648 GeV with the BES-II detector at the BEPC collider, we measure the observed cross sections for $e^+e^-\to \pi^+\pi^-\pi^0\pi^0$, $K^+K^-\pi^0\pi^0$, $2(\pi^+\pi^-\pi^0)$, $K^+K^-\pi^+\pi^-\pi^0\pi^0$ and $3(\pi^+\pi^-)\pi^0\pi^0$ at the three energy points. Based on these cross sections we set the upper limits on the observed cross sections and the branching fractions for $\psi(3770)$ decay into these final states at 90% C.L..Comment: 7 pages, 2 figure

Measurements of the observed cross sections for exclusive light hadron production in e^+e^- annihilation at \sqrt{s}= 3.773 and 3.650 GeV

By analyzing the data sets of 17.3 pb$^{-1}$ taken at $\sqrt{s}=3.773$ GeV and 6.5 pb$^{-1}$ taken at $\sqrt{s}=3.650$ GeV with the BESII detector at the BEPC collider, we have measured the observed cross sections for 12 exclusive light hadron final states produced in $e^+e^-$ annihilation at the two energy points. We have also set the upper limits on the observed cross sections and the branching fractions for $\psi(3770)$ decay to these final states at 90% C.L.Comment: 8 pages, 5 figur

A study of charged kappa in J/ψ→K±Ksπ∓π0J/\psi \to K^{\pm} K_s \pi^{\mp} \pi^0

Based on $58 \times 10^6$ $J/\psi$ events collected by BESII, the decay $J/\psi \to K^{\pm} K_s \pi^{\mp} \pi^0$ is studied. In the invariant mass spectrum recoiling against the charged $K^*(892)^{\pm}$, the charged $\kappa$ particle is found as a low mass enhancement. If a Breit-Wigner function of constant width is used to parameterize the kappa, its pole locates at $(849 \pm 77 ^{+18}_{-14}) -i (256 \pm 40 ^{+46}_{-22})$ MeV/$c^2$. Also in this channel, the decay $J/\psi \to K^*(892)^+ K^*(892)^-$ is observed for the first time. Its branching ratio is $(1.00 \pm 0.19 ^{+0.11}_{-0.32}) \times 10^{-3}$.Comment: 14 pages, 4 figure