Nanoscale electronic structure of the layered nitride superconductors α-KxTiNCl and β-HfNCly observed by scanning tunneling microscopy and spectroscopy

Scanning tunneling microscopy and spectroscopy (STM-STS) measurements have been carried out on the α (FeOCl)–type KxTiNCl (x∼0.5, Tc=16 K) and β (SmSI)–type HfNCly (y∼0.7, Tc=24 K) layered nitride superconductors. The STM images at 5 K showed clear atomic arrangements for both the compounds, namely, the rectangular lattice on α-KxTiNCl and the triangular lattice on β-HfNCly. The tunneling spectra in the superconducting states at low temperatures demonstrate qualitatively different features between these superconductors. For α-KxTiNCl, the spatial distributions of the density of states and the superconducting gap structures are very inhomogeneous, while those on β-HfNCly are found to be almost homogeneous. The nanoscale electronic features between these compounds correlate with the different lattice structures of the M (=Ti or Hf) N conducting layers, which are caused by the lattice symmetry difference itself or induced by the difference in the local doping distributions in these chemically reactive compounds. The averaged gap magnitudes in the superconducting states, Δ̅ ≃10.2 meV and 7.5 meV for α-KxTiNCl and β-HfNCly, corresponding to the gap ratios 2Δ̅ /kBTc≃ 15 and 7.2, respectively, indicate the unusually strong coupling effects of the superconductivity

Streptomyces tamarix sp. nov.: antagonism against Alternaria gaisen producing streptochlorin, isolated from Tamarix root soil

By the end of 2021, the pear yield in Xinjiang reached 1,795,900 tons, accounting for 1/9 of the country. Pear black spot, caused by Alternaria gaisen disease, has had a significant impact on the pear industry. A. gaisen can infect nearly all pear plants, resulting in black spots on the fruit that negatively affect both yield and quality. This study focused on the TRM76323 strain of Streptomyces, which was isolated from the soil of Tamarix chinensis in Xinjiang Province. Through a multiphase classification and identification method, the genetic classification status of the antagonistic strains was determined. The study also identified the antibacterial active components of streptochlorin using modern isolation and purification techniques. The antagonistic activity of Streptomyces against Alternaria was analyzed through in vitro and in vivo experiments. This research not only expanded the resource bank of antagonistic microorganisms in extreme environments in Xinjiang, but also identified active components that could contribute to the development of new drug lead compounds. Additionally, this study presents a novel approach for the prevention and control of pear black spot disease

Regional cerebral metabolic levels and turnover in awake rats after acute or chronic spinal cord injury

Spinal cord injury (SCI) is a common cause of disability, which often leads to sensorimotor cortex dysfunction above the spinal injury site. However, the cerebral regional effects on metabolic information after SCI have been little studied. Here, adult Sprague-Dawley rats were divided into acute and chronic treatment groups and sham groups with day-matched periods. The Basso, Beatte, and Bresnahan scores method were utilized to evaluate the changes in behaviors during the recovery of the animals, and the metabolic information was measured with the 1 H-observed/13 C-edited NMR method. Total metabolic concentrations in every region were almost similar in both treated groups. However, the metabolic kinetics in most regions in the acute group were significantly altered (P < .05), particularly in the cortical area, thalamus and medulla (P < .01). After long-term recovery, some metabolic kinetics were recovered, especially in the temporal cortex, occipital cortex, and medulla. The metabolic kinetic changes revealed the alteration of metabolism and neurotransmission in different brain regions after SCI, which present evidence for the alternation of brain glucose oxidation. Therefore, this shows the significant influence of SCI on cerebral function and neuroscience research. This study also provides the theoretical basis for clinical therapy after SCI, such as mitochondrial transplantation. Keywords: NMR; brain regions; metabolic kinetics; neurotransmitters; spinal cord injury

Synthesis and modifications of metal oxide nanostructures and their applications

Transition metal oxides are functional materials that have advanced applications in many areas, because of their diverse properties (optical, electrical, magnetic, etc.), hardness, thermal stability and chemical resistance. Novel applications of the nanostructures of these oxides are attracting significant interest as new synthesis methods are developed and new structures are reported. Hydrothermal synthesis is an effective process to prepare various delicate structures of metal oxides on the scales from a few to tens of nanometres, specifically, the highly dispersed intermediate structures which are hardly obtained through pyro-synthesis. In this thesis, a range of new metal oxide (stable and metastable titanate, niobate) nanostructures, namely nanotubes and nanofibres, were synthesised via a hydrothermal process. Further structure modifications were conducted and potential applications in catalysis, photocatalysis, adsorption and construction of ceramic membrane were studied. The morphology evolution during the hydrothermal reaction between Nb2O5 particles and concentrated NaOH was monitored. The study demonstrates that by optimising the reaction parameters (temperature, amount of reactants), one can obtain a variety of nanostructured solids, from intermediate phases niobate bars and fibres to the stable phase cubes. Trititanate (Na2Ti3O7) nanofibres and nanotubes were obtained by the hydrothermal reaction between TiO2 powders or a titanium compound (e.g. TiOSO4·xH2O) and concentrated NaOH solution by controlling the reaction temperature and NaOH concentration. The trititanate possesses a layered structure, and the Na ions that exist between the negative charged titanate layers are exchangeable with other metal ions or H+ ions. The ion-exchange has crucial influence on the phase transition of the exchanged products. The exchange of the sodium ions in the titanate with H+ ions yields protonated titanate (H-titanate) and subsequent phase transformation of the H-titanate enable various TiO2 structures with retained morphology. H-titanate, either nanofibres or tubes, can be converted to pure TiO2(B), pure anatase, mixed TiO2(B) and anatase phases by controlled calcination and by a two-step process of acid-treatment and subsequent calcination. While the controlled calcination of the sodium titanate yield new titanate structures (metastable titanate with formula Na1.5H0.5Ti3O7, with retained fibril morphology) that can be used for removal of radioactive ions and heavy metal ions from water. The structures and morphologies of the metal oxides were characterised by advanced techniques. Titania nanofibres of mixed anatase and TiO2(B) phases, pure anatase and pure TiO2(B) were obtained by calcining H-titanate nanofibres at different temperatures between 300 and 700 °C. The fibril morphology was retained after calcination, which is suitable for transmission electron microscopy (TEM) analysis. It has been found by TEM analysis that in mixed-phase structure the interfaces between anatase and TiO2(B) phases are not random contacts between the engaged crystals of the two phases, but form from the well matched lattice planes of the two phases. For instance, (101) planes in anatase and (101) planes of TiO2(B) are similar in d spaces (~0.18 nm), and they join together to form a stable interface. The interfaces between the two phases act as an one-way valve that permit the transfer of photogenerated charge from anatase to TiO2(B). This reduces the recombination of photogenerated electrons and holes in anatase, enhancing the activity for photocatalytic oxidation. Therefore, the mixed-phase nanofibres exhibited higher photocatalytic activity for degradation of sulforhodamine B (SRB) dye under ultraviolet (UV) light than the nanofibres of either pure phase alone, or the mechanical mixtures (which have no interfaces) of the two pure phase nanofibres with a similar phase composition. This verifies the theory that the difference between the conduction band edges of the two phases may result in charge transfer from one phase to the other, which results in effectively the photogenerated charge separation and thus facilitates the redox reaction involving these charges. Such an interface structure facilitates charge transfer crossing the interfaces. The knowledge acquired in this study is important not only for design of efficient TiO2 photocatalysts but also for understanding the photocatalysis process. Moreover, the fibril titania photocatalysts are of great advantage when they are separated from a liquid for reuse by filtration, sedimentation, or centrifugation, compared to nanoparticles of the same scale. The surface structure of TiO2 also plays a significant role in catalysis and photocatalysis. Four types of large surface area TiO2 nanotubes with different phase compositions (labelled as NTA, NTBA, NTMA and NTM) were synthesised from calcination and acid treatment of the H-titanate nanotubes. Using the in situ FTIR emission spectrescopy (IES), desorption and re-adsorption process of surface OH-groups on oxide surface can be trailed. In this work, the surface OH-group regeneration ability of the TiO2 nanotubes was investigated. The ability of the four samples distinctively different, having the order: NTA > NTBA > NTMA > NTM. The same order was observed for the catalytic when the samples served as photocatalysts for the decomposition of synthetic dye SRB under UV light, as the supports of gold (Au) catalysts (where gold particles were loaded by a colloid-based method) for photodecomposition of formaldehyde under visible light and for catalytic oxidation of CO at low temperatures. Therefore, the ability of TiO2 nanotubes to generate surface OH-groups is an indicator of the catalytic activity. The reason behind the correlation is that the oxygen vacancies at bridging O2- sites of TiO2 surface can generate surface OH-groups and these groups facilitate adsorption and activation of O2 molecules, which is the key step of the oxidation reactions. The structure of the oxygen vacancies at bridging O2- sites is proposed. Also a new mechanism for the photocatalytic formaldehyde decomposition with the Au-TiO2 catalysts is proposed: The visible light absorbed by the gold nanoparticles, due to surface plasmon resonance effect, induces transition of the 6sp electrons of gold to high energy levels. These energetic electrons can migrate to the conduction band of TiO2 and are seized by oxygen molecules. Meanwhile, the gold nanoparticles capture electrons from the formaldehyde molecules adsorbed on them because of gold’s high electronegativity. O2 adsorbed on the TiO2 supports surface are the major electron acceptor. The more O2 adsorbed, the higher the oxidation activity of the photocatalyst will exhibit. The last part of this thesis demonstrates two innovative applications of the titanate nanostructures. Firstly, trititanate and metastable titanate (Na1.5H0.5Ti3O7) nanofibres are used as intelligent absorbents for removal of radioactive cations and heavy metal ions, utilizing the properties of the ion exchange ability, deformable layered structure, and fibril morphology. Environmental contamination with radioactive ions and heavy metal ions can cause a serious threat to the health of a large part of the population. Treatment of the wastes is needed to produce a waste product suitable for long-term storage and disposal. The ion-exchange ability of layered titanate structure permitted adsorption of bivalence toxic cations (Sr2+, Ra2+, Pb2+) from aqueous solution. More importantly, the adsorption is irreversible, due to the deformation of the structure induced by the strong interaction between the adsorbed bivalent cations and negatively charged TiO6 octahedra, and results in permanent entrapment of the toxic bivalent cations in the fibres so that the toxic ions can be safely deposited. Compared to conventional clay and zeolite sorbents, the fibril absorbents are of great advantage as they can be readily dispersed into and separated from a liquid. Secondly, new generation membranes were constructed by using large titanate and small ã-alumina nanofibres as intermediate and top layers, respectively, on a porous alumina substrate via a spin-coating process. Compared to conventional ceramic membranes constructed by spherical particles, the ceramic membrane constructed by the fibres permits high flux because of the large porosity of their separation layers. The voids in the separation layer determine the selectivity and flux of a separation membrane. When the sizes of the voids are similar (which means a similar selectivity of the separation layer), the flux passing through the membrane increases with the volume of the voids which are filtration passages. For the ideal and simplest texture, a mesh constructed with the nanofibres 10 nm thick and having a uniform pore size of 60 nm, the porosity is greater than 73.5 %. In contrast, the porosity of the separation layer that possesses the same pore size but is constructed with metal oxide spherical particles, as in conventional ceramic membranes, is 36% or less. The membrane constructed by titanate nanofibres and a layer of randomly oriented alumina nanofibres was able to filter out 96.8% of latex spheres of 60 nm size, while maintaining a high flux rate between 600 and 900 Lm–2 h–1, more than 15 times higher than the conventional membrane reported in the most recent study

Metal oxide nanofibres membranes assembled by spin-coating method

Ceramic membranes are of particular interest in many industrial processes due to their ability to function under extreme conditions while maintaining their chemical and thermal stability. Major structural deficiencies under conventional fabrication approach are pin-holes and cracks, and the dramatic losses of flux when pore sizes are reduced to enhance selectivity. We overcome these structural deficiencies by constructing hierarchically structured separation layer on a porous substrate using larger titanate nanofibres and smaller boehmite nanofibres. This yields a radical change in membrane texture. The differences in the porous supports have no substantial influences on the texture of resulting membranes. The membranes with top layer of nanofibres coated on different porous supports by spin-coating method have similar size of the filtration pores, which is in a range of 10–100 nm. These membranes are able to effectively filter out species larger than 60 nm at flow rates orders of magnitude greater than conventional membranes. The retention can attain more than 95%, while maintaining a high flux rate about 900 L m-2 h. The calcination after spin-coating creates solid linkages between the fibres and between fibres and substrate, in addition to convert boehmite into -alumina nanofibres. This reveals a new direction in membrane fabrication

High-Performance Ceramic Membranes with a Separation Layer of Metal Oxide Nanofibers

In conventional fabrication of ceramic separation membranes, the particulate sols are applied onto porous supports. Major structural deficiencies under this approach are pin-holes and cracks, and the dramatic losses of flux when pore sizes are reduced to enhance selectivity. We have overcome these structural deficiencies by constructing hierarchically structured separation layer on a porous substrate using lager titanate nanofibers and smaller boehmite nanofibers. This yields a radical change in membrane texture. The resulting membranes effectively filter out species larger than 60 nm at flow rates orders of magnitude greater than conventional membranes. This reveals a new direction in membrane fabrication

Revisiting the CO oxidation reaction on various Au/TiO2catalysts: Roles of the surface OH groups and the reaction mechanism

This work aims to understand the influence of TiO2 surface structure in Au/TiO2 catalysts on CO oxidation. Au nanoparticles (3 wt%) in the range of 4 to 8 nm were loaded onto four kinds of TiO2 surfaces, which had different surface structures and were synthesized by calcining hydrogen titanate nanotubes at various temperatures and in different atmospheres. The Au catalyst supported on anatase nanorods exhibited the highest activity in CO oxidation at 30 °C among all the five Au/TiO2 catalysts including the reference catalyst of Au/TiO2-P25. X-ray photoelectron spectroscopy (XPS) and infrared emission spectra (IES) results indicate that the anatase nanorods have the most active surface on which water molecules can be strongly adsorbed and OH groups can be formed readily. Theoretical calculation indicates that the surface OH can facilitate the O2 adsorption on the anatase surface. Such active surface features are conducive to the O2 activation and CO oxidatio

Multiobjective Optimization of Cutting Parameters for TA10 Alloy Deep-Hole Drilling

In order to obtain better quality TA10 pipes, the Boring and Trepanning Association (BTA) deep-hole drilling process is used. However, this type of machining leads to difficult chip removal, tool wear, and poor hole-surface quality. In this study, a deep-hole drilling experiment was conducted on TA10 workpieces using the designed tool with different process parameters, and the process parameters were optimized by machining results with multiple objectives such as chip morphologies, tool wear, hole-axis deflection, and hole surface roughness. The results show that different process parameters have a great impact on the cutting process, with a higher feed resulting in smoother chip removal and a lower spindle speed resulting in lighter tool wear and less hole axis deflection. When the spindle speed is 145 r/min and the feed is 0.12 mm/r, the machined TA10 pipe meets both the accuracy requirement of roughness and the machining efficiency

TiO2 nanofibers of different crystal phases for transesterification of alcohols with dimethyl carbonate

TiO2 nanofibers with different crystal phases have been discovered to be efficient catalysts for the transesterification of alcohols with dimethyl carbonate to produce corresponding methyl carbonates. Advantages of this catalytic system include excellent selectivity (>99%), general suitability to alcohols, reusability and ease of preparation and separation of fibrous catalysts. Activities of TiO2 catalysts were found to correlate with their crystal phases which results in different absorption abilities and activation energies on the catalyst surfaces. The kinetic isotope effect (KIE) investigation identified the rate-determining step, and the isotope labeling of oxygen-18 of benzyl alcohol clearly demonstrated the reaction pathway. Finally, the transesterification mechanism of alcohols with dimethyl carbonate catalyzed by TiO2 nanofibers was proposed, in which the alcohol released the proton to form benzyl alcoholic anion, and subsequently the anion attacks the carbonyl carbon of dimethyl carbonate to produce the target product of benzyl methyl carbonate

Three-dimensional carbonate reservoir geomodeling based on the digital outcrop model

To better know the spatial distribution and architecture of carbonate reservoirs, three-dimensional carbonate reservoir geologic modeling based on the digital outcrop model (DOM) is proposed. Based on the traditional geologic study of outcrops, combined with digitizing the outcrop walls by utilizing the advanced instrument (LIDAR, RTK-GPS, GPR, Gigapan, etc), DOM is built, from which geological information based on measured sections and samples (litho-facies, porosity, permeability, sonic velocity) is extracted and used to build the 3-D outcrop reservoir geologic model by modeling software. Eventually the 3-D reservoir geologic model of outcrop is used to guide the subsurface research. The DOM-based 3-D reservoir geologic model for oolitic reservoirs of Triassic Feixianguan Formation in Yudongliang outcrop, NW Sichuan Basin, reveals more realistic spatial distribution of litho-facies, porosity and permeability, and their relationship, consequently providing more reliable evidence for seismic data interpretation and reservoir prediction of subsurface reservoirs with similar geological conditions. Key words: digital outcrop model, carbonate reservoir, 3-D geologic modeling, Triassic Feixianguan Formation, oolitic beac