An on-chip tunable micro-disk laser fabricated on Er3+ doped lithium niobate on insulator (LNOI)

We demonstrate a C-band wavelength-tunable microlaser with an Er3+ doped high quality (~1.02x10^6) lithium niobate microdisk resonator. With a 976 nm continuous-wave pump laser, lasing action can be observed at a pump power threshold as low as ~250 {\mu}W at room temperature. Furthermore, the microdisk laser wavelength can be tuned by varying the pump laser power, showing a tuning efficiency of ~-17.03 pm/mW at low pump power blow 13 mW, and 10.58 pm/mW at high pump power above 13 mW

Experimental Investigation on Compressive Strength, Ultrasonic Characteristic and Cracks Distribution of Granite Rock Irradiated by a Moving Laser Beam

Efficient fracturing is the key issue for the exploitation of geothermal energy in a Hot Dry Rock reservoir. By using the laser irradiation cracking method, this study investigates the changes in uniaxial compressive strength, ultrasonic characteristics and crack distributions of granite specimens by applying a laser beam under various irradiation conditions, including different powers, diameters and moving speeds of the laser beam. The results indicate that the uniaxial compressive strength is considerably dependent on the power, diameter and moving speed of the laser beam. The ultrasonic-wave velocity and amplitude of the first wave both increase with a decreased laser power, increased diameter or moving speed of the laser beam. The wave form of irradiated graphite is flattened by laser irradiation comparing with that of the original specimen without laser irradiation. The crack angle and the ratio of the cracked area at both ends are also related to the irradiation parameters. The interior cracks are observed to be well-developed around the bottom of the grooving kerf generated by the laser beam. The results indicate that laser irradiation is a new economical and practical method that can efficiently fracture graphite

Derivation of the unifying model and its discussion on the effective thermal conductivity of isotropic, porous and composite media

A detailed and primordial derivative process of the classical Maxwell problem applied to thermal conductivity was presented in this study, aiming to offer a foundation for further research on various correlations predicting the effective thermal conductivity (ETC) of porous-composite media, especially for the unifying equation with five fundamental structural models. This process of theoretical analysis is, in essence, solving the Laplace's Equation for temperature distribution in a spherical coordinate under certain initial and boundary as well as other assumed conditions. The particular solution processes also overcome various degrees of shortcomings existed in previous literatures in this field, e.g. problems of nondegenerate, insufficient boundary conditions and many tiny mistakes (typos or misprints). We hope this commentary letter can maintain the rigor of academic research in a rightful and suitable form, and prevent any potential confusion for future readers in this field

Experimental Study on Compression and Torsion Fracture within 3D Printed Cementation-Weak and Porosity-High Sandstones

Cretaceous sandstones have weak cementation and high porosity while exhibit a high apparent brittleness. Compression and torsion (C-T) fractures are widely distributed in Cretaceous sandstones due to asymmetric tectonic convergence action. However, studies on C-T fracture formation and the mechanisms causing variability in Cretaceous sandstones containing no oil or gas are rare due to the challenges in sampling intact sandstone cores, despite their significance to mine shaft sinking. Therefore, this study used binder jetting-based 3D printing to prepare artificial Cretaceous sandstone and developed a real-time X-ray computed tomography- (CT-) aided torsion shear apparatus to test them. The test results showed that the 3D printed (3DP) sandstone had characteristic indexes that approached and even exceeded the lower limits of Cretaceous sandstone cores, thereby accurately representing the unavailable cores. Furthermore, the 3DP sandstones had anisotropic properties comparable to the sandstone cores. Under C-T action, the 3DP sandstone exhibited a pronounced strain gradient of 2.0 %/mm perpendicular to fracture inclination. The inclination angles of fractures formed under C-T action tended to increase as the cell pressure increased, and that approached the orientation angles of maximal principal stress. The maximal and minimal principal stresses exerted inclination-slip and width-stretching effects, respectively, on C-T fractures. But the effect of inclination-slip on the C-T fractures was stronger than that of width-stretching. This insight into C-T fracture formation will guide future studies on the fracture evolution and its disaster-dominating mechanisms arisen from disturbances by shaft sinking