41 research outputs found

    Numerical Investigation of a Foundation Pit Supported by a Composite Soil Nailing Structure

    Get PDF
    In special geology conditions such as silt-soil, foundation pits are prone to instability and severe deformation. In this paper, a composite soil nailing structure was studied and its effect on a silt-soil symmetrical foundation pit investigated. The factors affecting the stability of the pit as well as its deformation characteristics were also explored. The results show that excavation depth of the foundation pit has a significant impact on its stability. The soil outside the foundation pit is in the form of a parabola, and the uplift of the soil mainly occurs at the bottom. The horizontal displacement of soil on the side wall of the foundation pit presents a "bulk belly" form. In addition, the axial force of soil nails is larger in the middle part, and smaller at both ends in the shape of a spindle. Moreover, the horizontal displacement is positively correlated with the inclination and spacing of the soil nails, but negatively correlated with the diameter and depth of the mixing pile inlay. Furthermore, the inclination and spacing of the soil nails, the diameter, and embedded depth of the mixing pile have their own critical values for stability of the foundation pit. Specifically, in this paper, with respect to soil nails, inclination should be below 30° and prestress value should not exceed 20 kN. With respect to the mixing pile, the diameter should be less than 1.5 m; when the embedded depth of the mixing pile exceeds the critical depth, the limiting effect of the mixing pile on horizontal displacement is not significant. This research provides important takeaways for the design of a composite soil nailing structure for symmetrical foundation pits

    Identification of Lesional Tissues and Nonlesional Tissues in Early Gastric Cancer Endoscopic Submucosal Dissection Specimens Using a Fiber Optic Raman System

    No full text
    Aim. To identify lesional and nonlesional tissues from early gastric cancer (EGC) patients by Raman spectroscopy to build a diagnostic model and effectively diagnose EGC. Method. Specimens were collected by endoscopic submucosal dissection from 13 patients with EGC, and 55 sets of standard Raman spectral data (each integrated 10 times) were obtained using the fiber optic Raman system; there were 33 sets of lesional tissue data, including 18 sets of high-grade intraepithelial neoplasia (HGIN) data and 15 sets of adenocarcinoma data, and 22 sets of nonlesional tissue data. After the preprocessing steps, the average Raman spectrum was obtained. Results. The nonlesional tissues showed peaks at 891 cm-1, 1103 cm-1, 1417 cm-1, 1206 cm-1, 1234 cm-1, 1479 cm-1, 1560 cm-1, and 1678 cm-1. Compared with the peaks corresponding to nonlesional tissues, the peaks of the lesional tissues shifted by different magnitudes, and a new characteristic peak at 1324 cm-1 was observed. Comparing the peak intensity ratio and the integral energy ratio of the lesional tissues with those of the nonlesional tissues revealed a significant difference between the two groups (independent-samplest-test, P<0.05). Considering the peak intensity ratio of I1560 cm-1/I1103 cm-1 as a diagnostic indicator, the accuracy, sensitivity, and specificity of diagnosing EGC were 98.8%, 93.9%, and 91.9%, respectively. Considering the integral energy ratio (noncontinuous frequency band and continuous frequency band) as a diagnostic indicator, the accuracy, sensitivity, and specificity of diagnosing EGC were 99.2-99.6%, 93.9-97.0%, and 95.5%, respectively. Conclusions. The integral energy ratio of the Raman spectrum could be considered an effective indicator for the diagnosis of EGC

    Study on the Synergistic Effects between Petroleum Sulfonate and a Nonionic–Anionic Surfactant for Enhanced Oil Recovery

    No full text
    Nonionic–anionic surfactants are expected to be applied in chemical flooding due to their important properties such as ultralow IFT values, good salt tolerance, and no chromatographic separation in porous media. In this study, a new type of nonionic–anionic–hydrophobic group structure surfactant N, N-dihydroxyethylalkylamide carboxylate (EAMC) was synthesized. The synergistic effects between petroleum sulfonate (KPS) and EAMC in reducing interfacial tension (IFT) and emulsification properties were studied. The influences of salt, alkali and Ca2+ on the IFTs of surfactant solutions were also investigated. One-dimensional core flooding experiments were used to characterize the enhanced oil recovery capability of the KPS and EAMC mixed system. The experimental results show that both EAMC and KPS have high interfacial activity and can reduce IFTs to about 0.01 mN/m order of magnitude against decane at optimized concentrations. The area occupied by the hydrophilic group of EAMC on the interface is smaller than that of its own hydrophobic group. The interfacial film formed by EAMC alone is relatively loose. The IFTs of KPS containing different structure petroleum sulfonates is affected by the difference in the adsorption rate of petroleum sulfonates on the interface, which shows that both the dynamic and equilibrium interfacial tensions can have the lowest values. However, the IFTs of the EAMC solutions against crude oil can be reduced to ultralow values because the mixed tight adsorption film is formed by EAMC and crude oil fraction molecules with synergistic effect. On the other hand, the KPS molecule has a hydrophobic part with large size and no synergism with crude oil fractions can be observed in the solutions containing only KPS. The combination of EAMC and KPS shows synergistic effect, namely ultralow IFT values, good emulsification properties, high alkali tolerance, and good salt and Ca2+ tolerance during a wide percentage range of EAMC. The best formula of EAMC and KPS system can be applied for EOR after polymer flooding. The studies in this paper are helpful for the design and application of a chemical flooding formula with nonionic–anionic–hydrophobic group structure surfactants
    corecore