Experimental investigation of non-uniform heating effect on flow boiling instabilities in a microchannel-based heat sink

Copyright @ 2011 ElsevierTwo-phase flow boiling in microchannels is one of the most promising cooling technologies for coping with high heat fluxes produced by the next generation of central processor units (CPUs). If flow boiling is to be used as a thermal management method for high heat flux electronics it is necessary to understand the behaviour of a non-uniform heat distribution, which is typically the case observed in a real operating CPU. The work presented is an experimental study of two-phase boiling in a multi-channel silicon heat sink with non-uniform heating, using water as the cooling liquid. Thin nickel film sensors, integrated on the back side of the heat sinks were used in order to gain insight related to temperature fluctuations caused by two-phase flow instabilities under non-uniform heating. The effect of various hotspot locations on the temperature profile and pressure drop has been investigated. It was observed that boiling inside microchannels with axially non-uniform heating leads to high temperature non-uniformity in the transverse direction.This research was supported by the UK Engineering and Physical Sciences Research Council through grant EP/D500109/1

An investigation of strain softening phenomenon in Al-0.1% Mg alloy during high-pressure torsion processing

An Al-0.1% Mg alloy was processed by high-pressure torsion (HPT) at room temperature. The Al-0.1% Mg alloy displays strain softening phenomenon through hardness evolution: the hardness values in the disc centre area are higher than at the disc edge area after 1/2, 1 and 3 turns, and the size of the hard region in the disc centre gradually reduces as the numbers of turns increases from 1/2 to 3 turns. The hardness values evolve towards homogeneity along the disc diameters after 5 and 10 turns. Electron backscatter diffraction (EBSD) and X-ray line profile analysis suggest that the lower hardness values at the disc edge area in the Al-0.1% Mg alloy are related to a recovery / recrystallization mechanism where the material is subjected to heavy straining

An Asymmetric Cone Model for Halo Coronal Mass Ejections

Due to projection effects, coronagraphic observations cannot uniquely determine parameters relevant to the geoeffectiveness of CMEs, such as the true propagation speed, width, or source location. The Cone Model for Coronal Mass Ejections (CMEs) has been studied in this respect and it could be used to obtain these parameters. There are evidences that some CMEs initiate from a flux-rope topology. It seems that these CMEs should be elongated along the flux-rope axis and the cross section of the cone base should be rather elliptical than circular. In the present paper we applied an asymmetric cone model to get the real space parameters of frontsided halo CMEs (HCMEs) recorded by SOHO/LASCO coronagraphs in 2002. The cone model parameters are generated through a fitting procedure to the projected speeds measured at different position angles on the plane of the sky. We consider models with the apex of the cone located at the center and surface of the Sun. The results are compared to the standard symmetric cone model

Comparisons of self-annealing behaviour of HPT-processed high purity Cu and a Pb–Sn alloy.

Early published results have demonstrated that high purity Cu and a Pb–62% Sn alloy exhibit very different behaviour during high-pressure torsion (HPT) processing at room temperature and subsequent room temperature storage. High purity Cu showed strain hardening behaviour with a refined grain structure during HPT processing whereas a Pb–62% Sn alloy displayed a strain weakening behaviour because the hardness values after HPT processing were significantly lower than in the initial as-cast condition even though the grain size was reduced. During room temperature storage after HPT processing, high purity Cu with lower numbers of rotations softened with the time of storage due to local recrystallization and abnormal grain growth whereas the Pb–62% Sn alloy hardened with the time of storage accompanied by grain growth. Through comparisons and analysis, it is shown that the low absolute melting point and the high homologous temperature at room temperature in the Pb–62% Sn alloy contribute to the increase in hardness with coarsening grain size during room temperature storage

The <i>Arabidopsis</i> SGN3/GSO1 receptor kinase integrates soil nitrogen status into shoot development

The Casparian strip is a barrier in the endodermal cell walls of plants that allows the selective uptake of nutrients and water. In the model plant Arabidopsis thaliana, its development and establishment are under the control of a receptor-ligand mechanism termed the Schengen pathway. This pathway facilitates barrier formation and activates downstream compensatory responses in case of dysfunction. However, due to a very tight functional association with the Casparian strip, other potential signaling functions of the Schengen pathway remain obscure. In this work, we created a MYB36-dependent synthetic positive feedback loop that drives Casparian strip formation independently of Schengen-induced signaling. We evaluated this by subjecting plants in which the Schengen pathway has been uncoupled from barrier formation, as well as a number of established barrier-mutant plants, to agar-based and soil conditions that mimic agricultural settings. Under the latter conditions, the Schengen pathway is necessary for the establishment of nitrogen-deficiency responses in shoots. These data highlight Schengen signaling as an essential hub for the adaptive integration of signaling from the rhizosphere to aboveground tissues

Z' Boson Mixings with Z-\gamma and Charge Assignments

Based on the general description for Z'-Z-\gamma mixing as derived from the electroweak chiral Lagrangian, we characterize and classify the various new physics models involving the Z' boson that have appeared in the literature into five classes: 1. Models with minimal Z'-Z mass mixing; 2. Models with minimal Z'-Z kinetic mixing; 3. Models with general Z'-Z mixing; 4. Models with Z'-\gamma kinetic and Z'-Z mixing; and 5. Models with Stueckelberg-type mixing. The corresponding mixing matrices are explicitly evaluated for each of these classes. We constrain and classify the Z' boson charges with respect to quark-leptons by anomaly cancellation conditions.Comment: 17 page

Linear Collider Test of a Neutrinoless Double Beta Decay Mechanism in left-right Symmetric Theories

There are various diagrams leading to neutrinoless double beta decay in left-right symmetric theories based on the gauge group SU(2)_L x SU(2)_R. All can in principle be tested at a linear collider running in electron-electron mode. We argue that the so-called lambda-diagram is the most promising one. Taking the current limit on this diagram from double beta decay experiments, we evaluate the relevant cross section e e to W_L W_R, where W_L is the Standard Model W-boson and W_R the one from SU(2)_R. It is observable if the life-time of double beta decay and the mass of the W_R are close to current limits. Beam polarization effects and the high-energy behaviour of the cross section are also analyzed.Comment: 17 pages, 6 figures. v2: minor changes, references added, to be published in EPJ

Entanglement in the One-dimensional Kondo Necklace Model

We discuss the thermal and magnetic entanglement in the one-dimensional Kondo necklace model. Firstly, we show how the entanglement naturally present at zero temperature is distributed among pairs of spins according to the strength of the two couplings of the chain, namely, the Kondo exchange interaction and the hopping energy. The effect of the temperature and the presence of an external magnetic field is then investigated, being discussed the adjustment of these variables in order to control the entanglement available in the system. In particular, it is indicated the existence of a critical magnetic field above which the entanglement undergoes a sharp variation, leading the ground state to a completely unentangled phase.Comment: 8 pages, 13 EPS figures. v2: four references adde

Cold Plasma Dispersion Relations in the Vicinity of a Schwarzschild Black Hole Horizon

We apply the ADM 3+1 formalism to derive the general relativistic magnetohydrodynamic equations for cold plasma in spatially flat Schwarzschild metric. Respective perturbed equations are linearized for non-magnetized and magnetized plasmas both in non-rotating and rotating backgrounds. These are then Fourier analyzed and the corresponding dispersion relations are obtained. These relations are discussed for the existence of waves with positive angular frequency in the region near the horizon. Our results support the fact that no information can be extracted from the Schwarzschild black hole. It is concluded that negative phase velocity propagates in the rotating background whether the black hole is rotating or non-rotating.Comment: 27 pages, 11 figures accepted for publication in Gen. Relat. & Gravi

Fractional smoothness and applications in finance

This overview article concerns the notion of fractional smoothness of random variables of the form $g(X_T)$, where $X=(X_t)_{t\in [0,T]}$ is a certain diffusion process. We review the connection to the real interpolation theory, give examples and applications of this concept. The applications in stochastic finance mainly concern the analysis of discrete time hedging errors. We close the review by indicating some further developments.Comment: Chapter of AMAMEF book. 20 pages