A case of implementing RFID-based real-time shop-floor material management for household electrical appliance manufacturers

Radio Frequency Identification (RFID) technologies provide automatic and accurate object data capturing capability and enable real-time object visibility and traceability. Potential benefits have been widely reported for improving manufacturing shop-floor management. However, reports on how such potentials come true in real-life shop-floor daily operations are very limited. As a result, skeptics overwhelm enthusiasm. This paper contributes to the re-vitalization of RFID efforts in manufacturing industries by presenting a real-life case study of applying RFID for managing material distribution in a complex assembly shop-floor at a large air conditioner manufacturer. The case study discusses how technical, social and organizational issues have been addressed throughout the project within the company. It is hoped that insights and lessons gained be generalized for future efforts across household electrical appliance manufacturers that share similar shop-floor. © 2010 The Author(s).published_or_final_versionSpringer Open Choice, 21 Feb 201

Heterogeneous activation of peroxymonosulfate by a biochar-supported Co3O4 composite for efficient degradation of chloramphenicols

Herein, a new peroxymonosulfate (PMS) activation system was established using a biochar (BC)-supported Co3O4 composite (Co3O4-BC) as a catalyst to enhance chloramphenicols degradation. The effects of the amount of Co3O4 load on the BC, Co3O4-BC amount, PMS dose and solution pH on the degradation of chloramphenicol (CAP) were investigated. The results showed that the BC support could well disperse Co3O4 particles. The degradation of CAP (30 mg/L) was enhanced in the Co3O4-BC/PMS system with the apparent degradation rate constant increased to 5.1, 19.4 and 7.2 times of that in the Co3O4/PMS, BC/PMS and PMS-alone control systems, respectively. Nearly complete removal of CAP was achieved in the Co3O4-BC/PMS system under the optimum conditions of 10 wt% Co3O4 loading on BC, 0.2 g/L. Co3O4-BC, 10 mM PMS and pH 7 within 10 min. The Co3O4/BC composites had a synergistic effect on the catalytic activity possibly because the conducting BC promoted electron transfer between the Co species and HSO5- and thus accelerated the Co3+/Co(2+)redox cycle. Additionally, over 85.0 +/- 1.5% of CAP was still removed in the 10th run. Although both SO4 center dot- and OH center dot were identified as the main active species, SO4 center dot- played a dominant role in CAP degradation. In addition, two other chloramphenicols, i.e., florfenicol (FF) and thiamphenicol (TAP), were also effectively degraded with percentages of 86.4 +/- 13% and 71.8 +/- 1.0%, respectively. This study provides a promising catalyst Co3O4-BC to activate PMS for efficient and persistent antibiotics degradation. (C) 2019 Elsevier Ltd. All rights reserved

Density-Matrix Algorithm for Phonon Hilbert Space Reduction in the Numerical Diagonalization of Quantum Many-Body Systems

Combining density-matrix and Lanczos algorithms we propose a new optimized phonon approach for finite-cluster diagonalizations of interacting electron-phonon systems. To illustrate the efficiency and reliability of our method, we investigate the problem of bipolaron band formation in the extended Holstein Hubbard model.Comment: 14 pages, 6 figures, Workshop on High Performance Computing in Science and Engineering, Stuttgart 200

Thickness dependence of microstructures in La0.8Ca0.2MnO3 thin films

The thickness dependence of microstructures of La0.8Ca0.2MnO3 (LCMO)/SrTiO3 (STO) thin films was investigated by high-resolution x-ray diffraction, small angle x-ray reflection, grazing incidence x-ray diffraction, scanning electron microscopy, and atomic force microscopy. The results show that all the LCMO films are well oriented in (00l) direction perpendicular to the substrate surface. Self-organized crystalline grains with a tetragonal shape are uniformly distributed on the film surface, indicating the deposition condition being of benefit to the formation of the crystalline grains. With increasing the film thickness, the crystalline quality of the LCMO film is improved, while the surface becomes rougher. There exists a nondesigned cap layer on the upper surface of the LCMO layer for all the samples. The mechanism is discussed briefly.published_or_final_versio

Establishing production service system and information collaboration platform for mold and die products

This paper investigates how the new concept of product service systems can be used and extended to transform, elevate, and revitalize traditional equipment manufacturing industry such as the Mold and Die (MD) sector. A mold and die production service systems (MPSS) framework is established based on recent developments within our industrial collaborators. Within the MPSS framework, MD manufacturers become more specialized in producing MD products and components while sharing and outsourcing manufacturing-oriented services (MOS) from a service provider. Typical services include collaborative order pooling and release, collaborative project progress status tracking, contractor-managed collaborative outsourcing, collaborative product design, collaborative production planning and scheduling, and after-sales technical supports. MOSs are designed, developed, and deployed as SaaS (software as application services) following the service-oriented architecture. Collectively, they form iMPSS-an Information and Collaboration Platform that enables MPSS. The use of iMPSS leads to benefits for stakeholders involved in providing mold and die functionality including better shopfloor decisions and reduced IT investments. © 2010 The Author(s).published_or_final_versionSpringer Open Choice, 21 Feb 201

TRAIL signals through the ubiquitin ligase MID1 to promote pulmonary fibrosis

© 2019 The Author(s). Background: Tumour necrosis factor-related apoptosis-inducing ligand (TRAIL) has previously been demonstrated to play a pro-inflammatory role in allergic airways disease and COPD through the upregulation of the E3 ubiquitin ligase MID1 and the subsequent deactivation of protein phosphatase 2A (PP2A). Methods: Biopsies were taken from eight IPF patients presenting to the Second Affiliated Hospital of Jilin University, China between January 2013 and February 2014 with control samples obtained from resected lung cancers. Serum TRAIL, MID1 protein and PP2A activity in biopsies, and patients' lung function were measured. Wild type and TRAIL deficient Tnfsf10 -/- BALB/c mice were administered bleomycin to induce fibrosis and some groups were treated with the FTY720 analogue AAL(s) to activate PP2A. Mouse fibroblasts were treated with recombinant TRAIL and fibrotic responses were assessed. Results: TRAIL in serum and MID1 protein levels in biopsies from IPF patients were increased compared to controls. MID1 levels were inversely associated while PP2A activity levels correlated with DLco. Tnfsf10 -/- and mice treated with the PP2A activator AAL(s) were largely protected against bleomycin-induced reductions in lung function and fibrotic changes. Addition of recombinant TRAIL to mouse fibroblasts in-vitro increased collagen production which was reversed by PP2A activation with AAL(s). Conclusion: TRAIL signalling through MID1 deactivates PP2A and promotes fibrosis with corresponding lung function decline. This may provide novel therapeutic targets for IPF

Broadband gradient impedance matching using an acoustic metamaterial for ultrasonic transducers

2016-2017 > Academic research: refereed > Publication in refereed journal201804_a bcmaVersion of RecordPublishe

Expanding genotype/phenotype of neuromuscular diseases by comprehensive target capture/NGS

published_or_final_versio

Interaction of enamel matrix proteins with human periodontal ligament cells

Dorothy Hodgkin Postgraduate Award for research studies (jointly funded by the Engineering and Physical Sciences Research Council, UK, and by Institut Straumann) and the Research Discretionary Funds of the Periodontology Unit, UCL Eastman Dental Institute. Financial support was also provided by the NIHR Comprehensive Biomedical Research Centre and by the WCU Program of the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology (No. R31-10069)