Measurement of the B0B^0 - Bˉ0\bar{B}^0 and Bs0B^0_s - Bˉs0\bar{B}^0_s production asymmetries in pp collisions at s=7\sqrt{s}=7 TeV and s=8\sqrt{s}=8 TeV with the LHCb experiment

The production rate of $b$ and $\bar{b}$ hadrons in $pp$ collisions are not expected to be strictly identical, due to imbalance between quarks and anti-quarks in the initial state. This phenomenon can be naively related to the fact that the $\bar{b}$ quark produced in the hard scattering might combine with a $u$ or $d$ valence quark from the colliding protons, whereas the same cannot happen for a $b$ quark. This thesis presents the analysis performed to determine the production asymmetries of $B^0$ and $B^0_s$. The analysis relies on data samples collected by the LHCb detector at the Large Hadron Collider (LHC) during the 2011 and 2012 data takings at two different values of the centre of mass energy $\sqrt{s}=7$ TeV and at $\sqrt{s}=8$ TeV, corresponding respectively to an integrated luminosity of 1 fb$^{-1}$ and of 2 fb$^{-1}$. The production asymmetry is one of the key ingredients to perform measurements of $CP$ violation in b-hadron decays at the LHC, since $CP$ asymmetries must be disentangled from other sources. The measurements of the production asymmetries are performed in bins of $p_\mathrm{T}$ and $\eta$ of the $B$-meson. The values of the production asymmetries, integrated in the ranges $4 < p_\mathrm{T} < 30$ GeV/c and $2.5<\eta<4.5$, are determined to be: \begin{equation}\ud A_\mathrm{P}(\B^0)= (-1.00\pm0.48\pm0.29)\%,\nonumber \end{equation} \begin{equation} A_\mathrm{P}(\B^0_s)= (\phantom{-}1.09\pm2.61\pm0.61)\%,\nonumber \end{equation} where the first uncertainty is statistical and the second is systematic. The measurement of $A_\mathrm{P}(B^0)$ is performed using the full statistics collected by LHCb so far, corresponding to an integrated luminosity of 3 fb$^{-1}$, while the measurement of $A_\mathrm{P}(B^0_s)$ is realized with the first 1 fb$^{-1}$, leaving room for improvement. No clear evidence of dependences on the values of $p_\mathrm{T}$ and $\eta$ is observed. The results presented in this thesis are the most precise measurements available up to date

Semicrystalline Polythiophene-Based Nanoparticles Deposited from Water on Flexible PET/ITO Substrates as a Sustainable Approach toward Long-Lasting Solid-State Electrochromic Devices

info:eu-repo/grantAgreement/EC/H2020/734834/EU FCT/MEC (UIDB/50006/2020). PhD grant SFRH/BD/139171/2018 from FCT/MCTES. We are very grateful to Dr. Carlos Pinheiro and Ynvisible company for discussions and assistance in the assembly of the electrochromic devices.We report the use of films of poly(3-hexylthiophene-2,5-diyl) nanoparticles (P3HT-NPs) prepared with the reprecipitation method employing water as solvent in the absence of surfactants for solid-state electrochromic devices (ECDs) and prove that these displays present enhanced properties when compared to similar ECDs with thin films deposited from chloroform. Films of differently sized nanoparticles (100 to 400 nm) were prepared and spray-coated on flexible PET-ITO substrates and tested for electrochromic properties. ECDs with switching times (t(90)) of 4 s were obtained using P3HT-NPs with a diameter of 100 nm, while those built using P3HT thin film presented longer switching speeds over 13 s for reduction (bleached to colored state). Additionally, the devices were subjected to 1000 cycles using -1.5 V/1.5 V, and the displays using P3HT 100 nm NPs presented higher transmittances (Delta(T) = +/- 20%) when compared with devices with P3HT thin film due to a more efficient oxidation step. Our data show that the availability of colloidal nanoparticles made of conjugated polymers deposited from water is an environmentally sustainable strategy leading to electrochromic devices with improved properties.authorsversionpublishe

In Vivo Bioengineering of Fluorescent Conductive Protein-Dye Microfibers

Engineering protein-based biomaterials is extremely challenging in bioelectronics, medicine, and materials science, as mechanical, electrical, and optical properties need to be merged to biocompatibility and resistance to biodegradation. An effective strategy is the engineering of physiological processes in situ, by addition of new properties to endogenous components. Here we show that a green fluorescent semiconducting thiophene dye, DTTO, promotes, in vivo, the biogenesis of fluorescent conductive protein microfibers via metabolic pathways. By challenging the simple freshwater polyp Hydra vulgaris with DTTO, we demonstrate the stable incorporation of the dye into supramolecular protein-dye co-assembled microfibers without signs of toxicity. An integrated multilevel analysis including morphological, optical, spectroscopical, and electrical characterization shows electrical conductivity of biofibers, opening the door to new opportunities for augmenting electronic functionalities within living tissue, which may be exploited for the regulation of cell and animal physiology, or in pathological contexts to enhance bioelectrical signaling

Insight on the Intracellular Supramolecular Assembly of DTTO: A Peculiar Example of Cell-Driven Polymorphism

The assembly of supramolecular structures within living systems is an innovative approach for introducing artificial constructs and developing biomaterials capable of influencing and/or regulating the biological responses of living organisms. By integrating chemical, photophysical, morphological, and structural characterizations, it is&nbsp;shown that the cell-driven assembly of 2,6-diphenyl-3,5-dimethyl-dithieno[3,2-b:2′,3′-d]thiophene-4,4-dioxide (DTTO) molecules into fibers results in the formation of a “biologically assisted” polymorphic form, hence the term bio-polymorph. Indeed, X-ray diffraction reveals that cell-grown DTTO fibers present a unique molecular packing leading to specific morphological, optical, and electrical properties. Monitoring the process of fiber formation in cells with time-resolved photoluminescence, it is&nbsp;established that cellular machinery is necessary for fiber production and a non-classical nucleation mechanism for their growth is postulated. These biomaterials may have disruptive applications in the stimulation and sense of living cells, but more crucially, the study of their genesis and properties broadens the&nbsp;understanding of life beyond the native components of cells

Photocatalytic Activity of Polymer Nanoparticles Modulates Intracellular Calcium Dynamics and Reactive Oxygen Species in HEK-293 Cells

Optical modulation of living cells activity by light-absorbing exogenous materials is gaining increasing interest, due to the possibility both to achieve high spatial and temporal resolution with a minimally invasive and reversible technique and to avoid the need of viral transfection with light-sensitive proteins. In this context, conjugated polymers represent ideal candidates for photo-transduction, due to their excellent optoelectronic and biocompatibility properties. In this work, we demonstrate that organic polymer nanoparticles, based on poly(3-hexylthiophene) conjugated polymer, establish a functional interaction with an in vitro cell model (Human Embryonic Kidney cells, HEK-293). They display photocatalytic activity in aqueous environment and, once internalized within the cell cytosol, efficiently generate reactive oxygen species (ROS) upon visible light excitation, without affecting cell viability. Interestingly, light-activated ROS generation deterministically triggers modulation of intracellular calcium ion flux, successfully controlled at the single cell level. In perspective, the capability of polymer NPs to produce ROS and to modulate Ca2+ dynamics by illumination on-demand, at non-toxic levels, may open the path to the study of biological processes with a gene-less approach and unprecedented spatio-temporal resolution, as well as to the development of new biotechnology tools for cell optical modulation

Quantum numbers of the X(3872)X(3872) state and orbital angular momentum in its ρ0Jψ\rho^0 J\psi decay

Angular correlations in $B^+\to X(3872) K^+$ decays, with $X(3872)\to \rho^0 J/\psi$, $\rho^0\to\pi^+\pi^-$ and $J/\psi \to\mu^+\mu^-$, are used to measure orbital angular momentum contributions and to determine the $J^{PC}$ value of the $X(3872)$ meson. The data correspond to an integrated luminosity of 3.0 fb$^{-1}$ of proton-proton collisions collected with the LHCb detector. This determination, for the first time performed without assuming a value for the orbital angular momentum, confirms the quantum numbers to be $J^{PC}=1^{++}$. The $X(3872)$ is found to decay predominantly through S wave and an upper limit of $4\%$ at $95\%$ C.L. is set on the fraction of D wave.Comment: 16 pages, 4 figure

Study of the rare B-s(0) and B-0 decays into the pi(+) pi(-) mu(+) mu(-) final state

A search for the rare decays $B_s^0 \to \pi^+\pi^-\mu^+\mu^-$ and $B^0 \to \pi^+\pi^-\mu^+\mu^-$ is performed in a data set corresponding to an integrated luminosity of 3.0 fb$^{-1}$ collected by the LHCb detector in proton-proton collisions at centre-of-mass energies of 7 and 8 TeV. Decay candidates with pion pairs that have invariant mass in the range 0.5-1.3 GeV/$c^2$ and with muon pairs that do not originate from a resonance are considered. The first observation of the decay $B_s^0 \to \pi^+\pi^-\mu^+\mu^-$ and the first evidence of the decay $B^0 \to \pi^+\pi^-\mu^+\mu^-$ are obtained and the branching fractions are measured to be $\mathcal{B}(B_s^0 \to \pi^+\pi^-\mu^+\mu^-)=(8.6\pm 1.5\,({\rm stat}) \pm 0.7\,({\rm syst})\pm 0.7\,({\rm norm}))\times 10^{-8}$ and $\mathcal{B}(B^0 \to \pi^+\pi^-\mu^+\mu^-)=(2.11\pm 0.51\,({\rm stat}) \pm 0.15\,({\rm syst})\pm 0.16\,({\rm norm}) )\times 10^{-8}$, where the third uncertainty is due to the branching fraction of the decay $B^0\to J/\psi(\to \mu^+\mu^-)K^*(890)^0(\to K^+\pi^-)$, used as a normalisation.A search for the rare decays Bs0→π+π−μ+μ− and B0→π+π−μ+μ− is performed in a data set corresponding to an integrated luminosity of 3.0 fb−1 collected by the LHCb detector in proton–proton collisions at centre-of-mass energies of 7 and 8 TeV . Decay candidates with pion pairs that have invariant mass in the range 0.5–1.3 GeV/c2 and with muon pairs that do not originate from a resonance are considered. The first observation of the decay Bs0→π+π−μ+μ− and the first evidence of the decay B0→π+π−μ+μ− are obtained and the branching fractions, restricted to the dipion-mass range considered, are measured to be B(Bs0→π+π−μ+μ−)=(8.6±1.5 (stat)±0.7 (syst)±0.7(norm))×10−8 and B(B0→π+π−μ+μ−)=(2.11±0.51(stat)±0.15(syst)±0.16(norm))×10−8 , where the third uncertainty is due to the branching fraction of the decay B0→J/ψ(→μ+μ−)K⁎(892)0(→K+π−) , used as a normalisation.A search for the rare decays Bs0→π+π−μ+μ− and B0→π+π−μ+μ− is performed in a data set corresponding to an integrated luminosity of 3.0 fb−1 collected by the LHCb detector in proton–proton collisions at centre-of-mass energies of 7 and 8 TeV . Decay candidates with pion pairs that have invariant mass in the range 0.5–1.3 GeV/c2 and with muon pairs that do not originate from a resonance are considered. The first observation of the decay Bs0→π+π−μ+μ− and the first evidence of the decay B0→π+π−μ+μ− are obtained and the branching fractions, restricted to the dipion-mass range considered, are measured to be B(Bs0→π+π−μ+μ−)=(8.6±1.5 (stat)±0.7 (syst)±0.7(norm))×10−8 and B(B0→π+π−μ+μ−)=(2.11±0.51(stat)±0.15(syst)±0.16(norm))×10−8 , where the third uncertainty is due to the branching fraction of the decay B0→J/ψ(→μ+μ−)K⁎(892)0(→K+π−) , used as a normalisation.A search for the rare decays $B_s^0 \to \pi^+\pi^-\mu^+\mu^-$ and $B^0 \to \pi^+\pi^-\mu^+\mu^-$ is performed in a data set corresponding to an integrated luminosity of 3.0 fb$^{-1}$ collected by the LHCb detector in proton-proton collisions at centre-of-mass energies of 7 and 8 TeV. Decay candidates with pion pairs that have invariant mass in the range 0.5-1.3 GeV/$c^2$ and with muon pairs that do not originate from a resonance are considered. The first observation of the decay $B_s^0 \to \pi^+\pi^-\mu^+\mu^-$ and the first evidence of the decay $B^0 \to \pi^+\pi^-\mu^+\mu^-$ are obtained and the branching fractions, restricted to the dipion-mass range considered, are measured to be $\mathcal{B}(B_s^0 \to \pi^+\pi^-\mu^+\mu^-)=(8.6\pm 1.5\,({\rm stat}) \pm 0.7\,({\rm syst})\pm 0.7\,({\rm norm}))\times 10^{-8}$ and $\mathcal{B}(B^0 \to \pi^+\pi^-\mu^+\mu^-)=(2.11\pm 0.51\,({\rm stat}) \pm 0.15\,({\rm syst})\pm 0.16\,({\rm norm}) )\times 10^{-8}$, where the third uncertainty is due to the branching fraction of the decay $B^0\to J/\psi(\to \mu^+\mu^-)K^*(890)^0(\to K^+\pi^-)$, used as a normalisation

Observation of the B0 → ρ0ρ0 decay from an amplitude analysis of B0 → (π+π−)(π+π−) decays

Proton–proton collision data recorded in 2011 and 2012 by the LHCb experiment, corresponding to an integrated luminosity of 3.0 fb−1 , are analysed to search for the charmless B0→ρ0ρ0 decay. More than 600 B0→(π+π−)(π+π−) signal decays are selected and used to perform an amplitude analysis, under the assumption of no CP violation in the decay, from which the B0→ρ0ρ0 decay is observed for the first time with 7.1 standard deviations significance. The fraction of B0→ρ0ρ0 decays yielding a longitudinally polarised final state is measured to be fL=0.745−0.058+0.048(stat)±0.034(syst) . The B0→ρ0ρ0 branching fraction, using the B0→ϕK⁎(892)0 decay as reference, is also reported as B(B0→ρ0ρ0)=(0.94±0.17(stat)±0.09(syst)±0.06(BF))×10−6

Measurement of the (eta c)(1S) production cross-section in proton-proton collisions via the decay (eta c)(1S) -&gt; p(p)over-bar

The production of the $\eta_c (1S)$ state in proton-proton collisions is probed via its decay to the $p \bar{p}$ final state with the LHCb detector, in the rapidity range $2.0 6.5$ GeV/c. The cross-section for prompt production of $\eta_c (1S)$ mesons relative to the prompt $J/\psi$ cross-section is measured, for the first time, to be $\sigma_{\eta_c (1S)}/\sigma_{J/\psi} = 1.74 \pm 0.29 \pm 0.28 \pm 0.18 _{B}$ at a centre-of-mass energy $\sqrt{s} = 7$ TeV using data corresponding to an integrated luminosity of 0.7 fb$^{-1}$, and $\sigma_{\eta_c (1S)}/\sigma_{J/\psi} = 1.60 \pm 0.29 \pm 0.25 \pm 0.17 _{B}$ at $\sqrt{s} = 8$ TeV using 2.0 fb$^{-1}$. The uncertainties quoted are, in order, statistical, systematic, and that on the ratio of branching fractions of the $\eta_c (1S)$ and $J/\psi$ decays to the $p \bar{p}$ final state. In addition, the inclusive branching fraction of $b$-hadron decays into $\eta_c (1S)$ mesons is measured, for the first time, to be $B ( b \rightarrow \eta_c X ) = (4.88 \pm 0.64 \pm 0.25 \pm 0.67 _{B}) \times 10^{-3}$, where the third uncertainty includes also the uncertainty on the $J/\psi$ inclusive branching fraction from $b$-hadron decays. The difference between the $J/\psi$ and $\eta_c (1S)$ meson masses is determined to be $114.7 \pm 1.5 \pm 0.1$ MeV/c$^2$.The production of the $\eta _c (1S)$ state in proton-proton collisions is probed via its decay to the $p\overline{p}$ final state with the LHCb detector, in the rapidity range $2.0 6.5 \mathrm{{\,GeV/}{ c}}$ . The cross-section for prompt production of $\eta _c (1S)$ mesons relative to the prompt ${{ J}}/{\psi }$ cross-section is measured, for the first time, to be $\sigma _{\eta _c (1S)}/\sigma _{{{{ J}}/{\psi }}} = 1.74\, \pm \,0.29\, \pm \, 0.28\, \pm \,0.18 _{{\mathcal{B}}}$ at a centre-of-mass energy ${\sqrt{s}} = 7 {~\mathrm{TeV}}$ using data corresponding to an integrated luminosity of 0.7 fb$^{-1}$ , and $\sigma _{\eta _c (1S)}/\sigma _{{{{ J}}/{\psi }}} = 1.60 \pm 0.29 \pm 0.25 \pm 0.17 _{{\mathcal{B}}}$ at ${\sqrt{s}} = 8 {~\mathrm{TeV}}$ using 2.0 fb$^{-1}$ . The uncertainties quoted are, in order, statistical, systematic, and that on the ratio of branching fractions of the $\eta _c (1S)$ and ${{ J}}/{\psi }$ decays to the $p\overline{p}$ final state. In addition, the inclusive branching fraction of ${b}$ -hadron decays into $\eta _c (1S)$ mesons is measured, for the first time, to be ${\mathcal{B}}( b {\rightarrow } \eta _c X ) = (4.88\, \pm \,0.64\, \pm \,0.29\, \pm \, 0.67 _{{\mathcal{B}}}) \times 10^{-3}$ , where the third uncertainty includes also the uncertainty on the ${{ J}}/{\psi }$ inclusive branching fraction from ${b}$ -hadron decays. The difference between the ${{ J}}/{\psi }$ and $\eta _c (1S)$ meson masses is determined to be $114.7 \pm 1.5 \pm 0.1 {\mathrm {\,MeV\!/}c^2}$ .The production of the $\eta_c (1S)$ state in proton-proton collisions is probed via its decay to the $p \bar{p}$ final state with the LHCb detector, in the rapidity range $2.0 6.5$ GeV/c. The cross-section for prompt production of $\eta_c (1S)$ mesons relative to the prompt $J/\psi$ cross-section is measured, for the first time, to be $\sigma_{\eta_c (1S)}/\sigma_{J/\psi} = 1.74 \pm 0.29 \pm 0.28 \pm 0.18 _{B}$ at a centre-of-mass energy $\sqrt{s} = 7$ TeV using data corresponding to an integrated luminosity of 0.7 fb$^{-1}$, and $\sigma_{\eta_c (1S)}/\sigma_{J/\psi} = 1.60 \pm 0.29 \pm 0.25 \pm 0.17 _{B}$ at $\sqrt{s} = 8$ TeV using 2.0 fb$^{-1}$. The uncertainties quoted are, in order, statistical, systematic, and that on the ratio of branching fractions of the $\eta_c (1S)$ and $J/\psi$ decays to the $p \bar{p}$ final state. In addition, the inclusive branching fraction of $b$-hadron decays into $\eta_c (1S)$ mesons is measured, for the first time, to be $B ( b \rightarrow \eta_c X ) = (4.88 \pm 0.64 \pm 0.29 \pm 0.67 _{B}) \times 10^{-3}$, where the third uncertainty includes also the uncertainty on the $J/\psi$ inclusive branching fraction from $b$-hadron decays. The difference between the $J/\psi$ and $\eta_c (1S)$ meson masses is determined to be $114.7 \pm 1.5 \pm 0.1$ MeV/c$^2$