RF Energy Harvesting Study Using Various Metamaterial Patch Structure

The E-field absorbance performance of various metamaterial absorber structure is presented. The study started from the simulation of various design patch of metamaterial absorber. The performances are measured from the reflection coefficient, percentage of absorption, value of E-field and the surface current for circle, square and hexagon patch design of metamaterial absorber. From the simulation, it is shown that the circle patch design shows the most reliable design for harvest energy with the absorption of 99.85% and highest E-field concentration of 2.07 × 105 V/m

Rheological and resistance properties of magnetorheological elastomer with cobalt for sensor application

Cobalt particles have been introduced as a filler due to the advantages of embedding their magnetic and electrical properties in magnetorheological elastomer (MRE). In the present research, the rheology and resistance of MRE are experimentally evaluated. Isotropic and anisotropic MRE samples containing silicone rubber and cobalt particles were fabricated. The magnetic properties of MRE are conducted using a vibrating sample magnetometer (VSM). The morphological aspects of MRE are observed by using field emission scanning electron microscopy (FESEM) and characterized by energy-dispersive X-ray spectroscopy (EDX). Rheological properties under various magnetic field strengths were measured for the magnetic field, strain amplitude, and frequency sweep test by using a parallel-plate rheometer. Subsequently, the resistance of MRE is tested under different applied forces and magnetic fields. The MRE storage modulus depicted an enhancement in field-dependent modulus across all the applied magnetic fields. The electrical resistance generated from the sample can be manipulated by external magnetic fields and mechanical loads. The conductivity of MRE is due to the existence of cobalt arrangements observed by FESEM. By introducing cobalt as filler and obtaining satisfactory results, the study might open new avenues for cobalt to be used as filler in MRE fabrication for future sensing applications

Design of biped hip simulator using SolidWorks

The increasing number of people who underwent both hip implant surgery based on World Health Organization (WHO) has received massive attention from researchers lately to develop various types of hip simulators in order to test the hip implant. Various number of hip simulator have been developed with different functions and capabilities. This paper presents the design development of biped hip simulator using SolidWorks software by taking into consideration some improvement and modifications. The finite element method is used to test the design whether it is safe to be used or not. The biped hip simulator has been successfully designed and ready to be fabricated as the endurance testing shown a positive results. The von Mises stress induced in the material is an alloy steel which is 2,975,862.3 N/m2 lower than the yield strength. Thus, the design is safe to be used as it obey the safety criterion

Disease progression in Plasmodium knowlesi malaria is linked to variation in invasion gene family members.

Emerging pathogens undermine initiatives to control the global health impact of infectious diseases. Zoonotic malaria is no exception. Plasmodium knowlesi, a malaria parasite of Southeast Asian macaques, has entered the human population. P. knowlesi, like Plasmodium falciparum, can reach high parasitaemia in human infections, and the World Health Organization guidelines for severe malaria list hyperparasitaemia among the measures of severe malaria in both infections. Not all patients with P. knowlesi infections develop hyperparasitaemia, and it is important to determine why. Between isolate variability in erythrocyte invasion, efficiency seems key. Here we investigate the idea that particular alleles of two P. knowlesi erythrocyte invasion genes, P. knowlesi normocyte binding protein Pknbpxa and Pknbpxb, influence parasitaemia and human disease progression. Pknbpxa and Pknbpxb reference DNA sequences were generated from five geographically and temporally distinct P. knowlesi patient isolates. Polymorphic regions of each gene (approximately 800 bp) were identified by haplotyping 147 patient isolates at each locus. Parasitaemia in the study cohort was associated with markers of disease severity including liver and renal dysfunction, haemoglobin, platelets and lactate, (r = ≥ 0.34, p =  <0.0001 for all). Seventy-five and 51 Pknbpxa and Pknbpxb haplotypes were resolved in 138 (94%) and 134 (92%) patient isolates respectively. The haplotypes formed twelve Pknbpxa and two Pknbpxb allelic groups. Patients infected with parasites with particular Pknbpxa and Pknbpxb alleles within the groups had significantly higher parasitaemia and other markers of disease severity. Our study strongly suggests that P. knowlesi invasion gene variants contribute to parasite virulence. We focused on two invasion genes, and we anticipate that additional virulent loci will be identified in pathogen genome-wide studies. The multiple sustained entries of this diverse pathogen into the human population must give cause for concern to malaria elimination strategists in the Southeast Asian region

Personal non-commercial use only

ABSTRACT. Objective. To assess bone mineral density (BMD) changes in patients with systemic lupus erythematosus (SLE) undergoing longterm therapy with corticosteroids (CS) while taking calcium, calcitriol, or alendronate. The primary endpoint was BMD changes at 2 years. Methods. Premenopausal SLE patients were randomized into 3 groups according to medication: calcium carbonate 500 mg bd (calcium alone), calcitriol 0.25 µg bd plus calcium carbonate 500 mg bd (calcitriol + calcium), and alendronate 70 mg/week plus calcium carbonate 500 mg bd (alendronate + calcium). BMD was measured at baseline and at the end of the first and second years. Results. Ninety-eight patients were recruited. There were 33 patients taking calcium alone, 33 calcitriol + calcium, and 32 alendronate + calcium. On randomization, median duration of CS use was 2.5 years (range 0-20 yrs). Seventy-seven patients (78.6%) completed the study (23 taking calcium alone, 27 calcitriol + calcium, 27 alendronate + calcium). There were no significant differences in mean CS dosages among the 3 groups at the time of BMD measurements. After 2 years, there were no significant changes in BMD in the calcium-alone and calcitriol + calcium groups, apart from a 0.93% (p &lt; 0.001) reduction in total hip BMD in the calcium-alone group. In contrast, the alendronate + calcium group showed significant increases in BMD of 2.69% (p &lt; 0.001) in the lumbar spine and 1.41% (p &lt; 0.001) in total hip. Conclusion. Both calcium alone and calcitriol + calcium preserved lumbar spine BMD in premenopausal patients with SLE taking longterm CS at 2 years, whereas alendronate + calcium led to increases in BMD in lumbar spine and total hip. Premenopausal women taking CS should be considered for osteoporosis prophylaxis

Morphological and molecular characterization of Curvularia and related species associated with leaf spot disease of rice in Peninsular Malaysia

Curvularia species are important phytopathogens reported worldwide. They are closely related; consist of major destructive pathogens mainly for grasses and cereal plants including rice (Oryza sativa). A leaf spot symptom of rice is one of the common symptoms found in the rice field and caused reduction of rice yield. However, there are no reports on Curvularia species associated with rice leaves showing spot symptoms. The objectives are to isolate and characterize Curvularia and related species from leaf spot of rice by using morphological and molecular characterization and to determine the phylogenetic relationship between the isolated fungi. Fungal isolation was done from diseased rice leaves showing leaf spot symptoms collected throughout Peninsular Malaysia. Thirty-three isolates were recovered and identified based on their morphological characteristics such as conidia morphology, colony appearance, pigmentation and growth rate for species delimitation. Internal transcribed spacer (ITS) region was amplified to confirm the species identification. The 33 isolates were identified as Bipolaris sorokiniana (10 isolates), Curvularia hawaiiensis (8 isolates), C. geniculata (6 isolates), C. eragrostidis (6 isolates), C. aeria (2 isolates) and C. lunata (1 isolate). A phylogenetic tree was constructed based on ITS sequences using neighbour-joining method. The tree grouped members of Curvularia and Bipolaris into different clades. The phylogenetic tree indicated that the presence of two groups of fungi species; highly virulent and mild pathogens. In conclusion, Curvularia species and Bipolaris sorokiniana were present in rice field in Malaysia and associated with leaf spot of rice

Thermogravimetric analysis properties of cellulosic natural fiber polymer composites: a review on influence of chemical treatmentst

Natural fiber such as bamboo fiber, oil palm empty fruit bunch (OPEFB) fiber, kenaf fiber, and sugar palm fiber-reinforced polymer composites are being increasingly developed for lightweight structures with high specific strength in the automotive, marine, aerospace, and construction indus-tries with significant economic benefits, sustainability, and environmental benefits. The plant-based natural fibers are hydrophilic, which is incompatible with hydrophobic polymer matrices. This leads to a reduction of their interfacial bonding and to the poor thermal stability performance of the resulting fiber-reinforced polymer composite. Based on the literature, the effect of chemical treatment of natural fiber-reinforced polymer composites had significantly influenced the thermogravimetric analysis (TGA) together with the thermal stability performance of the composite structure. In this review, the effect of chemical treatments used on cellulose natural fiber-reinforced thermoplastic and thermosetting polymer composites has been reviewed. From the present review, the TGA data are useful as guidance in determining the purity and composition of the composites’ structures, drying, and the ignition temperatures of materials. Knowing the stability temperatures of compounds based on their weight, changes in the temperature dependence is another factor to consider regarding the effectiveness of chemical treatments for the purpose of synergizing the chemical bonding between the natural fiber with polymer matrix or with the synthetic fibers

Isoprene hotspots at the Western Coast of Antarctic Peninsula during MASEC′16

Isoprene (C5H8) plays an important role in the formation of surface ozone (O3) and the secondary organic aerosol (SOA) which contributed to the climate change. This study aims to determine hourly distribution of tropospheric isoprene over the Western Coast of Antarctic Peninsula (WCAP) during the Malaysian Antarctic Scientific Expedition Cruise 2016 (MASEC′16). In-situ measurements of isoprene were taken using a custom-built gas chromatography with photoionization detector, known as iDirac. Biological parameters such as chlorophyll a (chl-a) and particulate organic carbon (POC) were compared to the in-situ isoprene measurements. Significant positive correlation was observed between isoprene and POC concentrations (r2 = 0.67, p < 0.001), but not between isoprene and chl-a. The hotspots of isoprene over maritime Antarctic were then were investigated using NAME dispersion model reanalysis. Measurements showed that isoprene mixing ratio were the highest over region of King George Island, Deception Island and Booth Island with values of ∼5.0, ∼0.9 and ∼5.2 ppb, respectively. Backward trajectory analysis showed that air masses may have lifted the isoprene emitted by marine algae. We believe our findings provide valuable data set of isoprene estimation over the under sampled WCAP

Dynamic mechanical properties of activated carbon–filled epoxy nanocomposites.

Nano-activated carbons obtained from oil palm empty fiber bunch (AC-EFB), bamboo stem (AC-BS), and coconut shells (AC-CNS) were reinforced in epoxy matrix to fabricate epoxy nanocomposites. The dynamic mechanical analysis of epoxy nanocomposites was carried out, and 5% AC-CNS treated with KOH-filled epoxy composites displayed the highest storage modulus of all the activated carbon–filled epoxy composites. The incorporation of a small amount of AC-BS, AC-EFB, and AC-CNS to the epoxy matrix enhanced the damping characteristics of the epoxy nanocomposites. The 5% AC-EFB treated with H3PO4 filled epoxy composites showed the highest glass transition temperature (Tg) in all temperature ranges