How to improve open rotor aerodynamics at cruise and take-off

AbstractA key challenge in open rotor design is getting the optimum aerodynamics at both the cruise and take-off conditions. This is particularly difficult because the operation and the requirements of an open rotor are very different at cruise compared to takeoff. This paper uses CFD results to explore the impact of various design changes on the cruise and take-off flow-fields. The paper then considers how a given open rotor design is best operated at take-off to minimise noise whilst maintaining high thrust. The main findings are that various design modifications can be applied to control the flow features that lead to lost efficiency at cruise and increased noise emission at take-off. A breakdown of the lost power terms from CFD solutions demonstrates how developments in open rotor design have led to reduced aerodynamic losses. At take-off, the operating point of the open rotor should be set such that the non-dimensional lift is as high as possible, without causing significant flow separation. This can be achieved through suitable amounts of re-pitch and speed up applied to a design. Comparisons with fully three-dimensional CFD show that the amount of re-pitch required can be determined using simplified methods such as two-dimensional CFD and a Blade Element Method.This is the accepted manuscript. The final published version is available at http://aerosociety.com/News/Publications/Aero-Journal/Online/2522/How-to-improve-open-rotor-aerodynamics-at-cruise-and-takeoff

Multi-element analysis based on an automated on-line microcolumn separation/preconcentration system using a novel sol-gel thiocyanatopropyl-functionalized silica sorbent prior to ICP-AES for environmental water samples

A sol-gel thiocyanatopropyl-functionalized silica sorbent was synthesized and employed for an automated on-line microcolumn preconcentration platform as a front-end to inductively coupled plasma atomic emission spectroscopy (ICP-AES) for the simultaneous determination of Cd(II), Pb(II), Cu(II), Cr(III), Co(II), Ni(II), Zn(II), Mn(II), Hg(II), and V(II). The developed system is based on an easy-to-repack microcolumn construction integrated into a flow injection manifold coupled directly to ICP-AES’s nebulizer. After on-line extraction/preconcentration of the target analyte onto the surface of the sorbent, successive elution with 1.0 mol L−1 HNO3 was performed. All main chemical and hydrodynamic factors affecting the effectiveness of the system were thoroughly investigated and optimized. Under optimized experimental conditions, for 60 s preconcentration time, the enhancement factor achieved for the target analytes was between 31 to 53. The limits of detection varied in the range of 0.05 to 0.24 μg L−1, while the limits of quantification ranged from 0.17 to 0.79 μg L−1. The precision of the method was expressed in terms of relative standard deviation (RSD%) and was less than 7.9%. Furthermore, good method accuracy was observed by analyzing three certified reference materials. The proposed method was also successfully employed for the analysis of environmental water samples

Wafer-scale uniformity of Dolan-bridge and bridgeless Manhattan-style Josephson junctions for superconducting quantum processors

We investigate die-level and wafer-scale uniformity of Dolan-bridge and bridgeless Manhattan Josephson junctions, using multiple substrates with and without through-silicon vias (TSVs). Dolan junctions fabricated on planar substrates have the highest yield and lowest room-temperature conductance spread, equivalent to ~100 MHz in transmon frequency. In TSV-integrated substrates, Dolan junctions suffer most in both yield and disorder, making Manhattan junctions preferable. Manhattan junctions show pronounced conductance decrease from wafer centre to edge, which we qualitatively capture using a geometric model of spatially-dependent resist shadowing during junction electrode evaporation. Analysis of actual junction overlap areas using scanning electron micrographs supports the model, and further points to a remnant spatial dependence possibly due to contact resistance.Comment: 25 pages, 13 figures, 1 tabl

Immigration and prices: quasi-experimental evidence from Syrian refugees in Turkey

We exploit the regional variation in the unexpected (or forced) inflow of Syrian refugees as a natural experiment to estimate the impact of immigration on consumer prices in Turkey. Using a difference-in- differences strategy and a comprehensive data set on the regional prices of CPI items, we find that general level of consumer prices has declined by approximately 2.5 percent due to immigration. Prices of goods and services have declined in similar magnitudes. We highlight that the channel through which the price declines take place is the informal labor market. Syrian refugees supply inexpensive informal labor and, thus, substitute the informal native workers especially in informal labor intensive sectors. We document that prices in these sectors have fallen by around 4 percent, while the prices in the formal labor intensive sectors have almost remained unchanged. Increase in the supply of informal immigrant workers generates labor cost advantages and keeps prices lower in the informal labor intensive sectors

Logical-qubit operations in an error-detecting surface code

We realize a suite of logical operations on a distance-two logical qubit stabilized using repeated error detection cycles. Logical operations include initialization into arbitrary states, measurement in the cardinal bases of the Bloch sphere, and a universal set of single-qubit gates. For each type of operation, we observe higher performance for fault-tolerant variants over non-fault-tolerant variants, and quantify the difference through detailed characterization. In particular, we demonstrate process tomography of logical gates, using the notion of a logical Pauli transfer matrix. This integration of high-fidelity logical operations with a scalable scheme for repeated stabilization is a milestone on the road to quantum error correction with higher-distance superconducting surface codes.Comment: 16 pages, 9 figures, 2 table

Barriers to price convergence

This paper uncovers novel empirical patterns in the cross-country price mechanism using a nonlinear factor model and threshold regression analysis based on individual goods retail price data for a large panel of countries. To our knowledge, this is the first paper to find strong evidence for club convergence of retail prices. These clubs emerge due to the interaction of traded and non-traded factors. For example, countries physically closer to potential trade partners converge faster than countries in the high distance regime as long as they have low initial labor productivity or low initial income. Moreover, we find an asymmetry in the extent that arbitrage opportunities related to international trade are exploited, with low initial price regime countries exhibiting faster convergence from below than high initial price regime countries exhibit from above, consistent with less resistance to exporting than to importing due to political economy considerations. We interpret our findings as evidence of a local law of one price due to barriers to price convergence influencing the duration of the effect of price shocks

Financial fragmentation and SMEs’ access to finance

This paper focuses on the impact of financial fragmentation on small and medium enterprises (SMEs)’ access to finance. We combine country-level data on financial fragmentation and the ECB’s SAFE (Survey on the Access to Finance of Enterprises) data for 12 European Union (EU) countries over 2009-2016. Our findings indicate that an increase in financial fragmentation not only raises the probability of all firms to be rationed but also to be charged higher loan rates; in addition, it increases the likelihood of borrower discouragement and it impairs firms’ perceptions of the future availability of bank funds. Less creditworthy firms are even more likely to become credit rationed, suggesting a flight to quality effect in lending. However, our study also documents a potential adverse effect of increasing bank market power resulting from greater integration. This suggests that financial integration could impair firms’ financing, if not accompanied by policy initiatives aimed at maintaining an optimal level of competition in the banking sector