Evaluation of quick disintegrating calcium carbonate tablets

The purpose of this investigation was to develop a rapidly disintegrating calcium carbonate (CC) tablet by direct compression and compare it with commercially available calcium tablets. CC tablets were formulated on a Carver press using 3 different forms of CC direct compressed granules (Cal-Carb 4450®, Cal-Carb 4457®, and Cal-Carb 4462®). The breaking strength was measured using a Stokes-Monsanto hardness tester. The disintegration and dissolution properties of the tablets were studied using USP methodology. The calcium concentration was determined by an atomic absorption spectrophotometer. Scanning electron microscopy was used to evaluate the surface topography of the granules and tablets. Breaking strength of Cal-Carb 4450®, Cal-Carb 4457®, and Cal-Carb 4462® tablets was in the range of 7.2 to 7.7 kg, as compared with a hardness of 6.2 kg and 10 kg for the commercially available calcium tablets Citracal® and Tums®, respectively. The disintegration time for the tablets presented in the order earlier was 4.1, 2.1, 1.9, 2.9, and 9.7 minutes, respectively. The dissolution studies showed that all formulations released 100% of the elemental calcium in simulated gastric fluid in less than 20 minutes. In summary, this study clearly demonstrated that quick disintegrating CC tablets can be formulated without expensive effervescence technology

Wet granulation fine particle ethylcellulose tablets: Effect of production variables and mathematical modeling of drug release

In the present study, the applicability of fine particle ethylcellulose (FPEC) to produce matrix tablets by a wet granulation technique was evaluated. The effect of various formulation and process variables, such as FPEC content, hardness of the tablet, and solubility of the drug, on the release of drug from these tablets was examined. Tablets were prepared by wet granulation of drug and FPEC in an appropriate mass ratio. Theophylline, caffeine, and dyphylline were selected as nonionizable model drugs with solubilities from 8.3 to 330 mg/mL at 25°C. Ibuprofen, phenylpropanolamine hydrochloride, and pseudoephedrine hydrochloride were selected as ionizable drugs with solubilities from 0.1 to 2000 mg/mL at 25°C. Drug release studies were conducted in 37°C water with UV detection. As the FPEC content and the hardness of the tablets increased, the release rate of the drug decreased. The drug release rate increased with an increase in the solubility of the drug. Model equations, intended to elucidate the drug release mechanism, were fitted to the release data. Parameters were generated and data presented by SAS software. The Akaike Information Criterion was also considered to ascertain the best-fit equation. Fickian diffusion and polymer relaxation were the release mechanisms for nonionizable and ionizable drugs

Influence of ibuprofen as a solid-state plasticizer in eudragit® RS 30 D on the physicochemical properties of coated beads

The purpose of this study was to investigate the physicochemical properties of nonpareil beads coated with Eudragit® RS 30 D containing ibuprofen as a multifunctional agent. The influence of the concentration of ibuprofen in the film coating and the effect of the coating level on drug release from coated beads was determined in pH 7.2 phosphate buffer solution. The influence of storage time at 23°C and 60°C on the release of ibuprofen from coated beads was also investigated. The thermal properties of the films were determined using a differential scanning calorimeter. Scanning electron microscopy was employed to image the surface morphology of the coated beads. Infrared spectroscopy was used to study the interaction of Eudragit RS 30 D and ibuprofen. Results from the dissolution studies demonstrated that increasing the amount of ibuprofen in the polymeric film reduced the rate of drug release, mainly because of a more complete coalescence of the polymeric particles of the latex dispersion. The glass transition temperature (Tg) of Eudragit RS 30 D films decreased and the surface of the coated beads became smoother as the concentration of ibuprofen was increased. Hydrogen bonding between the polymer and ibuprofen was demonstrated by Fourier transform infrared spectroscopy. No significant differences were found in drug dissolution between the coated beads stored at 23°C for 12 months and those stored at 60°C for 12 hours. The results of this study demonstrated that the ibuprofen plasticized the Eudragit RS 30 D. Furthermore, the dissolution rate of ibuprofen can be controlled and changes in the drug release rate can be minimized by using the drug-induced plasticization technique with this polymer