943 research outputs found

    Mechanical theory of the film-on-substrate-foil structure : curvature and overlay alignment in amorphous silicon thin-film devices fabricated on free-standing foil substrates

    Get PDF
    Flexible electronics will have inorganic devices grown at elevated temperatures on free-standing foil substrates. The thermal contraction mismatch between the substrate and the deposited device films, and the built-in stresses in these films, cause curving and a change in the in-plane dimensions of the workpiece. This change causes misalignment between the device layers. The thinner and more compliant the substrate, the larger the curvature and the misalignment. We model this situation with the theory of a bimetallic strip, which suggests that the misalignment can be minimized by tailoring the built-in stress introduced during film growth. Amorphous silicon thin-film transistors (a-Si:H TFTs) fabricated on stainless steel or polyimide (PI) (Kapton E®) foils need tensile built-in stress to compensate for the differential thermal contraction between the silicon films and the substrate. Experiments show that by varying the built-in stress in just one device layer, the gate silicon nitride (SiNx), one can reduce the misalignment between the source/drain and the gate levels from ∼400 parts-per-million to ∼100 parts-per-million

    Experimental and Simulation Study on the Emissions of a Multi-Point Lean Direct Injection Combustor

    Get PDF
    Spurred by the world’s attention to pollution emissions from commercial aero-engines, the International Civil Aviation Organization (ICAO) has made more stringent emission regulations for civil aircraft engines, especially the NOx emission.This paper develops a Five-Point lean direct injection (LDI) combustor with three swirler schemes to reduce the emissions of commercial aircraft engines. The flowfield of the combustor is studied numerically. Moreover, the combustion efficiency and gaseous emissions in different inlet conditions and fuel ratios of the main stage (α) are studied experimentally. The corresponding results reveal that, under a fuel-air ratio (FAR) between 0.0130 and 0.0283 and an α value between 30% and 60%, the combustion efficiency is 99.18%, 98.83%, and 99.03% when the pilot stage works alone, and 99.69%, 99.23%, and 99.75% when the pilot and main stage work simultaneously. Furthermore, the experimental results suggest that the NOx emission decreases as α increases, demonstrating that the convergent swirler has a tremendous advantage in reducing NOx emissions over Venturi

    High power rechargeable magnesium/iodine battery chemistry

    Full text link
    © The Author(s) 2017. Rechargeable magnesium batteries have attracted considerable attention because of their potential high energy density and low cost. However, their development has been severely hindered because of the lack of appropriate cathode materials. Here we report a rechargeable magnesium/iodine battery, in which the soluble iodine reacts with Mg2+ to form a soluble intermediate and then an insoluble final product magnesium iodide. The liquid-solid two-phase reaction pathway circumvents solid-state Mg2+ diffusion and ensures a large interfacial reaction area, leading to fast reaction kinetics and high reaction reversibility. As a result, the rechargeable magnesium/iodine battery shows a better rate capability (180 mAh g-1 at 0.5 C and 140 mAh g-1 at 1 C) and a higher energy density (∼400 Wh kg-1) than all other reported rechargeable magnesium batteries using intercalation cathodes. This study demonstrates that the liquid-solid two-phase reaction mechanism is promising in addressing the kinetic limitation of rechargeable magnesium batteries

    Fingering Instability of Dislocations and Related Defects

    Full text link
    We identify a fundamental morphological instability of mobile dislocations in crystals and related line defects. A positive gradient in the local driving force along the direction of defect motion destabilizes long-wavelength vibrational modes, producing a ``fingering'' pattern. The minimum unstable wavelength scales as the inverse square root of the force gradient. We demonstrate the instability's onset in simulations of a screw dislocation in Al (via molecular dynamics) and of a vortex in a 3-d XY ``rotator'' model.Comment: 4 pages, 3 figure

    An Inventory-Theory-Based Inexact Multistage Stochastic Programming Model for Water Resources Management

    Get PDF
    An inventory-theory-based inexact multistage stochastic programming (IB-IMSP) method is developed for planning water resources systems under uncertainty. The IB-IMSP is based on inexact multistage stochastic programming and inventory theory. The IB-IMSP cannot only effectively handle system uncertainties represented as probability density functions and discrete intervals but also efficiently reflect dynamic features of system conditions under different flow levels within a multistage context. Moreover, it can provide reasonable transferring schemes (i.e., the amount and batch of transferring as well as the corresponding transferring period) associated with various flow scenarios for solving water shortage problems. The applicability of the proposed IB-IMSP is demonstrated by a case study of planning water resources management. The solutions obtained are helpful for decision makers in not only identifying different transferring schemes when the promised water is not met, but also making decisions of water allocation associated with different economic objectives

    Direct observation of active material concentration gradients and crystallinity breakdown in LiFePO4 electrodes during charge/discharge cycling of lithium batteries

    No full text
    The phase changes that occur during discharge of an electrode comprised of LiFePO4, carbon, and PTFE binder have been studied in lithium half cells by using X-ray diffraction measurements in reflection geometry. Differences in the state of charge between the front and the back of LiFePO4 electrodes have been visualized. By modifying the X-ray incident angle the depth of penetration of the X-ray beam into the electrode was altered, allowing for the examination of any concentration gradients that were present within the electrode. At high rates of discharge the electrode side facing the current collector underwent limited lithium insertion while the electrode as a whole underwent greater than 50% of discharge. This behavior is consistent with depletion at high rate of the lithium content of the electrolyte contained in the electrode pores. Increases in the diffraction peak widths indicated a breakdown of crystallinity within the active material during cycling even during the relatively short duration of these experiments, which can also be linked to cycling at high rate

    Crack kinking at the tip of a mode I crack in an orthotropic solid

    Full text link
    The competition between crack penetration and crack kinking is addressed for a mode I macroscopic crack in an orthotropic elastic solid. Cohesive zones of finite peak strength and finite toughness are placed directly ahead of and orthogonal to the plane of the parent crack. The cohesive zone ahead of the crack tip is tensile in nature and leads to crack penetration, whereas the inclined zones slide without opening under a combined shear and normal traction, and give crack kinking. Thereby, the competition between continued crack growth by penetration ahead of the crack tip versus kinking is determined as a function of the relative strength and relative toughness of the cohesive zones. This competition is plotted in the form of a failure mechanism map, with the role of material orthotropy emphasized. Synergistic toughening is observed, whereby the parent crack tip is shielded by the activation of both the tensile and shear (kinking) cohesive zones, and the macroscopic toughness is elevated. The study is used to assess the degree to which various classes of composite have the tendency to undergo kinking

    Evaluation of gene amplification and protein expression of HER-2/neu in esophageal squamous cell carcinoma using Fluorescence in situ Hybridization (FISH) and immunohistochemistry

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Esophageal squamous cell carcinoma (ESCC) is the sixth most frequent neoplasia in Brazil. It is usually associated with a poor prognosis because it is often at an advanced stage when diagnosed and there is a high frequency of lymph node metastases. It is important to know what prognostic factors can facilitate diagnosis, optimize therapeutic decisions, and improve the survival of these patients. A member of the epidermal growth factor receptor (EGFR) family, c-erbB-2, has received much attention because of its therapeutic implications; however, few studies involving fluorescence <it>in situ </it>hybridization (FISH) analysis of HER-2/neu gene amplification and protein expression in ESCC have been conducted. The aim of this study was to verify the presence of HER-2/neu gene amplification using FISH, and to correlate the results with immunohistochemical expression and clinical-pathological findings.</p> <p>Methods</p> <p>One hundred and ninety-nine ESCC cases were evaluated using the Tissue Microarray (TMA) technique. A polyclonal antibody against c-erbB-2 was used for immunohistochemistry. Analyses were based on the membrane staining pattern. The results were classified according to the Herceptest criteria (DAKO): negative (0/1+), potential positive (2+) and positive (3+). The FISH reactions were performed according to the FISH HER2 PharmDx (DAKO) protocol. In each case, 100 tumor nuclei were evaluated. Cases showing a gene/CEN17 fluorescence ratio ≥ 2 were considered positive for gene amplification.</p> <p>Results</p> <p>The c-erbB-2 expression was negative in 117/185 cases (63.2%) and positive in 68 (36.8%), of which 56 (30.3%) were 2+ and 12 (6.5%) were 3+. No significant associations were found among protein expression, clinicopathological data and overall survival. Among the 47 cases analyzed, 38 (80.9%) showed no gene amplification while 9 (19.1%) showed amplification, as demonstrated by FISH. Cases that were negative (0/1+) and potential positive (2+) for c-erbB-2 expression by immunohistochemistry showed no gene amplification. However, all cases with gene amplification were positive (3+) by immunohistochemistry. According to univariate analysis, there was a significant difference (p = 0.003) in survival rates when cases with and without HER-2/neu amplification were compared.</p> <p>Conclusion</p> <p>Our data demonstrate the correspondence between gene amplification and protein expression of HER-2/neu. Gene amplification is an indicator of poor prognosis in ESCC.</p
    • …
    corecore