DEM investigation of sand response during displacement pile installation

Previous experimental and numerical studies indicate that the stress state of sand at a specific depth changes significantly during the installation of a displacement pile. At a given depth level, the horizontal stress in sand increases as the end of pile approaches and reduces as the pile continues to penetrate and go past the sand element. This horizontal stress reversal, together with the large-strain deformation of the sand at the pile shaft, may cause a reduced accuracy in the calculation of pile capacity. In this paper, the micro-mechanical behaviour of sand developed around pile shaft during the installation of a closed-ended pile was studied using the two-dimensional Discrete Element Method (DEM). Sand assembly was modelled as uncrushable discs, and the closed-ended pile was modelled as a rigid clump which was made of a large number of overlapped discs with a fixed distance. The sand responses in terms of stress, strain and volume changes during the monotonic jacking of the closed-ended pile were investigated. Simulation results revealed micro-mechanical behaviours of the sand in both the interface zone “B” adjacent to the pile shaft and the far field zone “A” away from the pile. It was shown that the sand along the pile shaft at a small normalised distance to pile tip was subjected to a volume reduction as the pile goes past. As the pile drives deeper, the sand at a larger normalised distance to pile tip exhibited dilation. This captured process will give insights to the degradation of shaft friction at a given sand horizon

Immunosuppressive mechanisms of human bone marrow derived mesenchymal stromal cells in BALB/c host graft versus host disease murine models

published_or_final_versio

Low-temperature switching fatigue behavior of ferroelectric SrBi₂Ta₂O[sub 9] thin films

Author name used in this publication: Z. G. LiuAuthor name used in this publication: H. L. W. ChanAuthor name used in this publication: C. L. Choy2003-2004 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Hydrodynamics, erosion and accretion of intertidal mudflats in extremely shallow waters

© 2019 Elsevier B.V. Intertidal flats are shallow-water environments that undergo cyclical variations in water depth, leading to a frequent occurrence of extremely shallow water stages (ESWS; water depths 0.2 m), and the rate of change was an order of magnitude faster than during RDWS. This larger and faster bed-level change occurred even though the ESWS duration only accounted for 10% of the entire tidal cycle. This result occurred because the bed shear stress due to combined current–wave action during ESWS, was, on average, two times higher than during RDWS at the flood stage causing more extensive erosion. Whereas during the ebb stage, this shear stress during ESWS was only half of that during RDWS resulting in greater accretion. The main implications of these results are that, because ESWS occur frequently (twice every tide) and are associated with large bed shear stress and bed-level changes, these conditions are likely to play an important role in morphological changes of intertidal flats. Our study shows that ESWS have a key influence on intertidal flat hydrodynamics and sediment dynamics. Thus our results are the basis for an improved understanding of the coastal morphodynamic processes on intertidal flats

Microstructural characterization of AISI 431 martensitic stainless steel laser-deposited coatings

High cooling rates during laser cladding of stainless steels may alter the microstructure and phase constitution of the claddings and consequently change their functional properties. In this research, solidification structures and solid state phase transformation products in single and multi layer AISI 431 martensitic stainless steel coatings deposited by laser cladding at different processing speeds are investigated by optical microscopy, Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), orientation imaging microscopy (OIM), ternary phase diagram, Schaeffler and TTT diagrams. The results of this study show how partitionless solidification and higher solidification rates alter the microstructure and phase constitution of martensitic stainless steel laser deposited coatings. In addition, it is shown that while different cladding speeds have no effect on austenite–martensite orientation relationship in the coatings, increasing the cladding speed has resulted in a reduction of hardness in deposited coatings which is in contrast to the common idea about obtaining higher hardness values at higher cladding speeds.

Tidal Response to Sea-Level Rise in Different Types of Estuaries: The Importance of Length, Bathymetry, and Geometry

Tidal response to sea-level rise (SLR) varies in different coastal systems. To provide a generic pattern of tidal response to SLR, a systematic investigation was conducted using numerical techniques applied to idealized and realistic estuaries, with model results cross-checked by analytical solutions. Our results reveal that the response of tidal range to SLR is nonlinear, spatially heterogeneous, and highly affected by the length and bathymetry of an estuary and weakly affected by the estuary convergence with an exception of strong convergence. Contrary to the common assumption that SLR leads to a weakened bottom friction, resulting in increased tidal amplitude, we demonstrate that tidal range is likely to decrease in short estuaries and in estuaries with a narrow channel and large low-lying shallow areas

Inexact fuzzy-stochastic constraint-softened programming - A case study for waste management

In this study, an inexact fuzzy-stochastic constraint-softened programming method is developed for municipal solid waste (MSW) management under uncertainty, The developed method can deal with multiple uncertainties presented in terms of fuzzy sets, interval values and random variables. Moreover, a number of violation levels for the system constraints are allowed. This is realized through introduction of violation variables to soften system constraints, such that the model's decision space can be expanded under demanding conditions. This can help generate a range of decision alternatives under various conditions, allowing in-depth analyses of tradeoffs among economic objective, satisfaction degree, and constraint-violation risk. The developed method is applied to a case study of planning a MSW management system. The uncertain and dynamic information can be incorporated within a multi-layer scenario tree; revised decisions are permitted in each time period based on the realized values of uncertain events. Solutions associated with different satisfaction degree levels have been generated, corresponding to different constraint-violation risks. They are useful for supporting decisions of waste flow allocation and system-capacity expansion within a multistage context. (C) 2008 Elsevier Ltd. All rights reserved

Realizing and characterizing chiral photon flow in a circuit quantum electrodynamics necklace

Gauge theory plays the central role in modern physics. Here we propose a scheme of implementing artificial Abelian gauge fields via the parametric conversion method in a necklace of superconducting transmission line resonators (TLRs) coupled by superconducting quantum interference devices (SQUIDs). The motivation is to synthesize an extremely strong effective magnetic field for charge-neutral bosons which can hardly be achieved in conventional solid-state systems. The dynamic modulations of the SQUIDs can induce effective magnetic fields for the microwave photons in the TLR necklace through the generation of the nontrivial hopping phases of the photon hopping between neighboring TLRs. To demonstrate the synthetic magnetic field, we study the realization and detection of the chiral photon flow dynamics in this architecture under the influence of decoherence. Taking the advantages of its simplicity and flexibility, this parametric scheme is feasible with state-of-the-art technology and may pave an alternative way for investigating the gauge theories with superconducting quantum circuits. We further propose a quantitative measure for the chiral property of the photon flow. Beyond the level of qualitative description, the dependence of the chiral flow on external pumping parameters and cavity decay is characterized

Wigner Crystallization in a Quasi-3D Electronic System

When a strong magnetic field is applied perpendicularly (along z) to a sheet confining electrons to two dimensions (x-y), highly correlated states emerge as a result of the interplay between electron-electron interactions, confinement and disorder. These so-called fractional quantum Hall (FQH) liquids form a series of states which ultimately give way to a periodic electron solid that crystallizes at high magnetic fields. This quantum phase of electrons has been identified previously as a disorder-pinned two-dimensional Wigner crystal with broken translational symmetry in the x-y plane. Here, we report our discovery of a new insulating quantum phase of electrons when a very high magnetic field, up to 45T, is applied in a geometry parallel (y-direction) to the two-dimensional electron sheet. Our data point towards this new quantum phase being an electron solid in a "quasi-3D" configuration induced by orbital coupling with the parallel field