Effect of oxidized wood flour as functional filler on the mechanical, thermal and flame-retardant properties of polylactide biocomposites

Based on the biodegradable material-polyethylene glycol (PEG)-as the plasticizer, oxidized wood flour (OWF) as the charring agent for polylactide (PLA), a series flame-retardant PLA biocomposites were prepared via melt-compounding and hot-compression. The effect of OWF on the thermal, mechanical and flame retardant properties of biocomposites was investigated systemically. We have found that after the incorporation of PEG and OWF with 10¿wt% into PLA, the biocomposite showed higher tensile elongation than pure PLA. Furthermore, the presence of OWF and ammonium polyphosphate (APP) imparted the biocomposite good flame-retardant performance, shown a remarkable reduction on the peak of heat release rate (PHRR), improved LOI value and passed UL94 V-0 rating. Moreover, Scanning electron microscopy-energy dispersive spectra (SEM/EDS) and thermogravimetric analysis coupled with infrared spectrometer (TG-FTIR) were also performed to understand the flame retardant mechanism. These results proved that OWF could be as new functional filler for polymer composites to further improve their flame retardancy.Peer ReviewedPostprint (published version

Relay discovery and selection for large-scale P2P streaming.

In peer-to-peer networks, application relays have been commonly used to provide various networking services. The service performance often improves significantly if a relay is selected appropriately based on its network location. In this paper, we studied the location-aware relay discovery and selection problem for large-scale P2P streaming networks. In these large-scale and dynamic overlays, it incurs significant communication and computation cost to discover a sufficiently large relay candidate set and further to select one relay with good performance. The network location can be measured directly or indirectly with the tradeoffs between timeliness, overhead and accuracy. Based on a measurement study and the associated error analysis, we demonstrate that indirect measurements, such as King and Internet Coordinate Systems (ICS), can only achieve a coarse estimation of peers' network location and those methods based on pure indirect measurements cannot lead to a good relay selection. We also demonstrate that there exists significant error amplification of the commonly used "best-out-of-K" selection methodology using three RTT data sets publicly available. We propose a two-phase approach to achieve efficient relay discovery and accurate relay selection. Indirect measurements are used to narrow down a small number of high-quality relay candidates and the final relay selection is refined based on direct probing. This two-phase approach enjoys an efficient implementation using the Distributed-Hash-Table (DHT). When the DHT is constructed, the node keys carry the location information and they are generated scalably using indirect measurements, such as the ICS coordinates. The relay discovery is achieved efficiently utilizing the DHT-based search. We evaluated various aspects of this DHT-based approach, including the DHT indexing procedure, key generation under peer churn and message costs

Hopf bifurcation analysis for a model of plant virus propagation with two delays

Abstract In this paper, we consider a model of plant virus propagation with two delays and Holling type II functional response. The stability of the positive equilibrium and the existence of Hopf bifurcation are analyzed by choosing τ1 $\tau_{1}$ and τ2 $\tau_{2}$ as bifurcation parameters, respectively. Using the center manifold theory and normal form method, we discuss conditions for determining the stability and the bifurcation direction of the bifurcating periodic solution. Finally, we carry out numerical simulations to illustrate the theoretical analysis

Sustainable Development of Food Processing Enterprises in China

Sustainable development is an eternal topic in the development of human society. The paper seeks to contribute to the adoption of sustainable development practices in the food processing enterprises of China by fostering the capacities of the enterprises. Moreover, the paper aims to contribute to the promotion of sustainable consumption by helping and encouraging consumers in making informed choices of sustainable and eco-efficient produced foodstuffs. We combined with 1015 survey data in 28 areas of China by using AHP model analysis of the sustainable development of food processing enterprises. The results show that, the overall level of sustainable development ability of food processing enterprises in China is not high; paying attention to economic is significantly more important than paying attention to social and environmental aspects. Chinese food processing entities have an acceptable basis for the implementation of sustainable development. But there are still some problems. Finally, some suggestions are put forward to promote the sustainable development of Chinese food processing enterprises

Development of High-Temperature Wire-Grid Thin Film Strain Gauges

Aero-engine turbine stator blades are often used in harsh environments with high temperatures and high pressure and are prone to fatigue fractures. Real-time and accurate monitoring of blade surface stress and strain is critical to ensure safe operation. In this study, thin-film strain gauges (TFSGs) that can be used in high-temperature environments above 1000 °C were designed and fabricated using a PtRh6 thin film as the sensitive material. The hysteresis effect of the stress transfer upon establishing a thermo-mechanical coupling finite element model of the Inconel718 high-temperature nickel-based alloy equal-strength beam PtRh6 TFSGs was analyzed and the optimal combination of thin-film thickness and longitudinal grid length of wire-grid TFSGs was determined. In order to solve the problem of high-temperature insulation, the insulating properties of a single-layer Al2O3 insulating film, a single-layer ZrO2 insulating film, a double-layer Al2O3/ZrO2 composite insulating film, and a four-layer Al2O3/ZrO2/Al2O3/ZrO2 composite insulating film at high temperature were compared and studied using scanning electron microscopy to analyze the microscopic morphology and composition of the four insulating film structures. The results showed that the four-layer Al2O3/ZrO2/Al2O3/ZrO2 composite insulating film had the best insulating properties at high temperatures. On this basis, an Al2O3/ZrO2/Al2O3/ZrO2 composite insulating film, PtRh6 sensitive layer, and Al2O3 protective film were sequentially deposited on a high-temperature nickel-based alloy equal-strength beam using DC pulsed magnetron sputtering technology to obtain an Inconel718 high-temperature nickel-based alloy equal-strength beam PtRh6 TFSG. Its gauge factor (GF) and temperature coefficient of resistance (TCR) were calibrated, and the results showed that the sensor could be used in harsh environments of 1000 °C. The above results provide new ideas for measuring stress and strain in aerospace under high-temperature and high-pressure environments