In Vivo Inhibitory Effect on the Biofilm Formation of Candida albicans by Liverwort Derived Riccardin D

Riccardin D, a macrocyclic bisbibenzyl isolated from Chinese liverwort Dumortiera hirsute, has been proved to have inhibitory effect on biofilms formation of Candida albicans in in vitro study. Our present study aims to investigate the in vivo effect and mechanisms of riccardin D against C. albicans biofilms when used alone or in combination with clinical using antifungal agent fluconazole. XTT reduction assay revealed riccardin D had both prophylactic and therapeutic effect against C. albicans biofilms formation in a dose-dependent manner when using a central venous catheter related infective animal model. Scanning electron microscope and laser confocal scanning microscope showed that the morphology of biofilms was altered remarkably after riccardin D treatment, especially hypha growth inhibition. To uncover the underlying molecular mechanisms, quantitative real-time RT-PCR was performed to observe the variation of related genes. The downregulation of hypha-specific genes such as ALS1, ALS3, ECE1, EFG1, HWP1 and CDC35 following riccardin D treatment suggested riccardin D inhibited the Ras-cAMP-Efg pathway to retard the hypha formation, then leading to the defect of biofilms maturation. Moreover, riccardin D displayed an increased antifungal activity when administered in combination with fluconazole. Our study provides a potential clinical application to eliminate the biofilms of relevant pathogens

A new grinding force model for micro grinding RB-SiC ceramic with grinding wheel topography as an input

The ability to predict grinding force for hard and brittle materials is important to optimize and control the grinding process. However, it is a difficult task to establish a comprehensive grinding force model that takes into account of brittle fracture, grinding conditions and random distribution of grinding wheel topography. Therefore, this study developed a new grinding force model for micro-grinding of RB-SiC ceramics. First, the grinding force components and grinding trajectory were analyzed based on the critical depth of rubbing, ploughing and brittle fracture. Afterwards, the corresponding individual grain force were established and the total grinding force was derived through incorporating the single grain force with dynamic cutting grains. Finally, a series of calibration and validation experiments were conducted to obtain the empirical coefficient and verify the accuracy of the model. It was found that ploughing and fracture were the dominate removal modes, which illustrate the force components decomposed is correct. Furthermore, the values predicted according to proposed model are consistent with the experimental data, with the average deviation of 6.793% and 8.926% for the normal and tangential force, respectively. This suggests that the proposed model is acceptable and can be used to simulate the grinding force for RB-SiC ceramics in practical

Fundamental understanding of the deformation mechanism and corresponding behavior of RB-SiC ceramics subjected to nano-scratch in ambient temperature

To get insight into nano-scale deformation behavior and material removal mechanism of RB-SiC ceramic, nanoscratch experiments were performed using a Berkovich indenter. Structure changes in chips and subsurface deformation were characterized by means of Raman spectroscopy. The result shows that the SiC phase underwent amorphization in ductile chips, while no amorphous feature can be observed in brittle chips and substrate within scratch groove. The following estimated stress surround the indenter reveals that amorphous deformation in ductile chips is governed by tangential stress (above 95 GPa), whereas the dislocations-based substrate deformation mechanism was dominated by normal stress. In the end, the effects of normal load and scratching velocity on the scratch behavior including scratch residual depth, elastic recovery and friction coefficient that related to RB-SiC ceramic deformation mechanism were also analyzed. With the increase of normal load, the deformation mechanism transfers from ductile to brittle fracture mode and cause the decrease of elastic recovery and the increase of residual depth and friction coefficient. Furthermore, the increased high density of dislocations as a result of the increased scratching velocity give rise to the increase of scratch hardness, which finally result in the increase of elastic recovery and decrease of residual depth and friction coefficients. This study contributes a new understanding of the brittle material deformation mechanism during a nano-scale scratching process

Novel oligodeoxynucleotide agonists of TLR9 containing N3-Me-dC or N1-Me-dG modifications

Synthetic oligodeoxynucleotides containing unmethylated CpG motifs activate Toll-Like Receptor 9 (TLR9). Our previous studies have shown the role of hydrogen-bond donor and acceptor groups of cytosine and guanine in the CpG motif and identified synthetic immunostimulatory motifs. In the present study to elucidate the significance of N3-position of cytosine and N1-position of guanine in the CpG motif, we substituted C or G of a CpG dinucleotide with N3-Me-cytosine or N1-Me-guanine, respectively, in immunomodulatory oligodeoxynucleotides (IMOs). IMOs containing N-Me-cytosine or N-Me-guanine in C- or G-position, respectively, of the CpG dinucleotide showed activation of HEK293 cells expressing TLR9, but not TLR3, 7 or 8. IMOs containing N-Me-cytosine or N-Me-guanine modification showed activity in mouse spleen cell cultures, in vivo in mice, and in human cell cultures. In addition, IMOs containing N-Me-substitutions reversed antigen-induced Th2 immune responses towards a Th1-type in OVA-sensitized mouse spleen cell cultures. These studies suggest that TLR9 tolerates a methyl group at N1-position of G and a methyl group at N3-position of C may interfere with TLR9 activation to some extent. These are the first studies elucidating the role of N3-position of cytosine and N1-position of guanine in a CpG motif for TLR9 activation and immune stimulation

Laser-assisted grinding of reaction-bonded SiC

The paper presents development of a novel laser-assisted grinding process to reduce surface roughness and subsurface damage in grinding reaction-bonded (RB)-SiC. A thermal control approach is proposed to facilitate the process development, in which a two-temperature model is applied to control the required laser power to thermal softening of RB-SiC prior to grinding operation without melting the workpiece or leaving undesirable microstructural alteration, while Fourier's law is adopted to obtain the thermal gradient for verification. An experimental comparison of conventional grinding and laser-assisted grinding shows significant reduction of machined surface roughness (37%-40%) and depth of subsurface damage (SSD) layer (22%-50.6%) using the thermal control approach under the same grinding conditions. It also shows high specific grinding energy 1.5 times that in conventional grinding at the same depth of cut which accounts for the reduction of subsurface damage as it provides enough energy to promote ductile-regime material removal

Dynamic Transformation of Nano-MoS2 in a Soil-Plant System Empowers Its Multifunctionality on Soybean Growth

Molybdenum disulfide (nano-MoS2) nanomaterials have shown great potential for biomedical and catalytic applications due to their unique enzyme-mimicking properties. However, their potential agricultural applications have been largely unexplored. A key factor prior to the application of nano-MoS2 in agriculture is understanding its behavior in a complex soil-plant system, particularly in terms of its transformation. Here, we investigate the distribution and transformation of two types of nano-MoS2 (MoS2 nanoparticles and MoS2 nanosheets) in a soil-soybean system through a combination of synchrotron radiation-based X-ray absorption near-edge spectroscopy (XANES) and single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS). We found that MoS2 nanoparticles (NPs) transform dynamically in soil and plant tissues, releasing molybdenum (Mo) and sulfur (S) that can be incorporated gradually into the key enzymes involved in nitrogen metabolism and the antioxidant system, while the rest remain intact and act as nanozymes. Notably, there is 247.9 mg/kg of organic Mo in the nodule, while there is only 49.9 mg/kg of MoS2 NPs. This study demonstrates that it is the transformation that leads to the multifunctionality of MoS2, which can improve the biological nitrogen fixation (BNF) and growth. Therefore, MoS2 NPs enable a 30% increase in yield compared to the traditional molybdenum fertilizer (Na2MoO4). Excessive transformation of MoS2 nanosheets (NS) leads to the overaccumulation of Mo and sulfate in the plant, which damages the nodule function and yield. The study highlights the importance of understanding the transformation of nanomaterials for agricultural applications in future studies.</p

Material removal mechanism of laser-assisted grinding of RB-SiC ceramics and process optimization

Laser-assisted grinding (LAG) is a promising method for cost-effective machining of hard and brittle materials. Knowledge of material removal mechanism and attainable surface integrity are crucial to the development of this new technique. This paper focusing on the application of LAG to Reaction Bonded (RB)-SiC ceramics investigate the material removal mechanism, grinding force ratio and specific grinding energy as well as workpiece surface temperature and surface integrity, together with those of the conventional grinding for comparison. Response surface method and genetic algorithm were used to optimize the machining parameters, achieving minimum surface roughness and subsurface damage, maximum material removal rate. The experiments results revealed that the structural changes and hardness decrease enhanced the probability of plastic removal in LAG, therefore obtained better surface integrity. The error of 3-D finite element simulation model that developed to predict the temperature gradient produced by the laser radiation is found to be within 2.7%-15.8%

PolyMPCNet: Towards ReLU-free Neural Architecture Search in Two-party Computation Based Private Inference

The rapid growth and deployment of deep learning (DL) has witnessed emerging privacy and security concerns. To mitigate these issues, secure multi-party computation (MPC) has been discussed, to enable the privacy-preserving DL computation. In practice, they often come at very high computation and communication overhead, and potentially prohibit their popularity in large scale systems. Two orthogonal research trends have attracted enormous interests in addressing the energy efficiency in secure deep learning, i.e., overhead reduction of MPC comparison protocol, and hardware acceleration. However, they either achieve a low reduction ratio and suffer from high latency due to limited computation and communication saving, or are power-hungry as existing works mainly focus on general computing platforms such as CPUs and GPUs. In this work, as the first attempt, we develop a systematic framework, PolyMPCNet, of joint overhead reduction of MPC comparison protocol and hardware acceleration, by integrating hardware latency of the cryptographic building block into the DNN loss function to achieve high energy efficiency, accuracy, and security guarantee. Instead of heuristically checking the model sensitivity after a DNN is well-trained (through deleting or dropping some non-polynomial operators), our key design principle is to em enforce exactly what is assumed in the DNN design -- training a DNN that is both hardware efficient and secure, while escaping the local minima and saddle points and maintaining high accuracy. More specifically, we propose a straight through polynomial activation initialization method for cryptographic hardware friendly trainable polynomial activation function to replace the expensive 2P-ReLU operator. We develop a cryptographic hardware scheduler and the corresponding performance model for Field Programmable Gate Arrays (FPGA) platform

Fluorescein-guided surgery for high-grade glioma resection: a five-year-long retrospective study at our institute

ObjectiveThis study investigates the extent of resection, duration of surgery, intraoperative blood loss, and postoperative complications in patients with high-grade glioma who received surgery with or without sodium fluorescein guidance.MethodsA single-center retrospective cohort study was conducted on 112 patients who visited our department and underwent surgery between July 2017 and June 2022, with 61 in the fluorescein group and 51 in the non-fluorescein group. Baseline characteristics, intraoperative blood loss, surgery duration, resection extent, and postoperative complications were documented.ResultsThe duration of surgery was significantly shorter in the fluorescein group than in the non-fluorescein group (P = 0.022), especially in patients with tumors in the occipital lobes (P = 0.013). More critically, the gross total resection (GTR) rate was significantly higher in the fluorescein group than in the non-fluorescein group (45.9% vs. 19.6%, P = 0.003). The postoperative residual tumor volume (PRTV) was also significantly lower in the fluorescein group than in the non-fluorescein group (0.40 [0.12-7.11] cm3 vs. 4.76 [0.44-11.00] cm3, P = 0.020). Particularly in patients with tumors located in the temporal and occipital lobes (temporal, GTR 47.1% vs. 8.3%, P = 0.026; PRTV 0.23 [0.12-8.97] cm3 vs. 8.35 [4.05-20.59] cm3, P = 0.027; occipital, GTR 75.0% vs. 0.0%, P = 0.005; PRTV 0.15 [0.13-1.50] cm3 vs. 6.58 [3.70-18.79] cm3, P = 0.005). However, the two groups had no significant difference in intraoperative blood loss (P = 0.407) or postoperative complications (P = 0.481).ConclusionsFluorescein-guided resection of high-grade gliomas using a special operating microscope is a feasible, safe, and convenient technique that significantly improves GTR rates and reduces postoperative residual tumor volume when compared to conventional white light surgery without fluorescein guidance. This technique is particularly advantageous for patients with tumors located in non-verbal, sensory, motor, and cognitive areas such as the temporal and occipital lobes, and does not increase the incidence of postoperative complications