4 research outputs found
CVPR 2023 Text Guided Video Editing Competition
Humans watch more than a billion hours of video per day. Most of this video
was edited manually, which is a tedious process. However, AI-enabled
video-generation and video-editing is on the rise. Building on text-to-image
models like Stable Diffusion and Imagen, generative AI has improved
dramatically on video tasks. But it's hard to evaluate progress in these video
tasks because there is no standard benchmark. So, we propose a new dataset for
text-guided video editing (TGVE), and we run a competition at CVPR to evaluate
models on our TGVE dataset. In this paper we present a retrospective on the
competition and describe the winning method. The competition dataset is
available at https://sites.google.com/view/loveucvpr23/track4.Comment: Project page: https://sites.google.com/view/loveucvpr23/track
Numerical Simulation on Backfilling of Buried Pipes Using Controlled Low Strength Materials
The backfill quality of a pipeline has an important influence on pipeline operation. When loose backfill is used, the pipeline may be damaged after short term operation. In this study, the numerical simulation analysis of buried pipes was carried out under three conditions: loose backfill around the pipe, dense backfill, and controlled low strength materials (CLSM) backfill. The effects of narrow trench backfilling using CLSM on the force and deformation of pipelines were studied. The results showed that When CLSM was used for buried pipe backfilling, the pressure on the top of the pipe and on the side of the pipe was significantly reduced. When the surface pressure was 200 kPa, the radial displacement at the top of the pipe was only 0.6 mm. Compared with the dense backfill of the pipe, the radial displacement of the pipe top was reduced by 82.9%, which greatly reduced the deformation of the pipe. CLSM backfilling is a good way to protect the pipeline. The pressure is uniformly applied around the pipe, and the circumferential strain around the pipe is greatly reduced. Pipelines backfilling with CLSM for buried flexible pipes has good mechanical properties and it is expected to be applied to engineering practice
Properties of Lightweight Controlled Low-Strength Materials Using Construction Waste and EPS for Oil and Gas Pipelines
Due to its particularity and importance, long-distance oil and gas pipelines need to be well protected from damage by backfill materials. In this study, construction waste and expanded polystyrene (EPS) were used to replace conventional fine aggregate, and ethylene vinyl acetate-resin (EVA) was used to modify the surface of EPS to prepare lightweight controlled low strength materials (CLSM). Lightweight CLSM was tested in mechanics and physics and its microstructure was studied using microscopic analysis methods. The results revealed that the surface modification of EPS by EVA could greatly improve the compatibility of EPS with inorganic cementitious materials and prepare CLSM with a fluidity greater than 200 mm. EPS and cement content in cementitious materials play an important role in the development of material strength. When the volume ratio of EPS to construction waste was 2, and the content of cement in the cementitious materials was 35%, CLSM’s unconfined compressive strength at 28 days was only 0.48 MPa. In order to obtain the lightweight CLSM that meets the mechanical properties, the EPS content should not be too large. It can be concluded from the microscopic analysis that the increase of EPS content will lead to poor pore uniformity of the specimen, forming a loose mesh structure of defects, which is not conducive to the development of strength. In this study, EPS and construction waste are used to provide a green idea for preparing lightweight controlled low strength materials, which provides a reference for the backfill protection of the material in oil and gas pipelines in the future
Properties of Lightweight Controlled Low-Strength Materials Using Construction Waste and EPS for Oil and Gas Pipelines
Due to its particularity and importance, long-distance oil and gas pipelines need to be well protected from damage by backfill materials. In this study, construction waste and expanded polystyrene (EPS) were used to replace conventional fine aggregate, and ethylene vinyl acetate-resin (EVA) was used to modify the surface of EPS to prepare lightweight controlled low strength materials (CLSM). Lightweight CLSM was tested in mechanics and physics and its microstructure was studied using microscopic analysis methods. The results revealed that the surface modification of EPS by EVA could greatly improve the compatibility of EPS with inorganic cementitious materials and prepare CLSM with a fluidity greater than 200 mm. EPS and cement content in cementitious materials play an important role in the development of material strength. When the volume ratio of EPS to construction waste was 2, and the content of cement in the cementitious materials was 35%, CLSM’s unconfined compressive strength at 28 days was only 0.48 MPa. In order to obtain the lightweight CLSM that meets the mechanical properties, the EPS content should not be too large. It can be concluded from the microscopic analysis that the increase of EPS content will lead to poor pore uniformity of the specimen, forming a loose mesh structure of defects, which is not conducive to the development of strength. In this study, EPS and construction waste are used to provide a green idea for preparing lightweight controlled low strength materials, which provides a reference for the backfill protection of the material in oil and gas pipelines in the future