5 research outputs found
Tuning On–Off Current Ratio and Field-Effect Mobility in a MoS<sub>2</sub>–Graphene Heterostructure <i>via</i> Schottky Barrier Modulation
Field-effect transistor (FET) devices composed of a MoS<sub>2</sub>–graphene heterostructure can combine the advantages of high carrier mobility in graphene with the permanent band gap of MoS<sub>2</sub> for digital applications. Herein, we investigate the electron transfer, photoluminescence, and gate-controlled carrier transport in such a heterostructure. We show that the junction is a Schottky barrier, whose height can be artificially controlled by gating or doping graphene. When the applied gate voltage (or the doping level) is zero, the photoexcited electron–hole pairs in monolayer MoS<sub>2</sub> can be split by the heterojunction, significantly reducing the photoluminescence. By applying negative gate voltage (or <i>p</i>-doping) in graphene, the interlayer impedance formed between MoS<sub>2</sub> and graphene exhibits an 100-fold increase. For the first time, we show that the gate-controlled interlayer Schottky impedance can be utilized to modulate carrier transport in graphene, significantly depleting the hole transport, but preserving the electron transport. Accordingly, we demonstrate a new type of FET device, which enables a controllable transition from NMOS digital to bipolar characteristics. In the NMOS digital regime, we report a very high room temperature on/off current ratio (<i>I</i><sub>ON</sub>/<i>I</i><sub>OFF</sub> ∼ 36) in comparison to graphene-based FET devices without sacrificing the field-effect electron mobilities in graphene. By engineering the source/drain contact area, we further estimate that a higher value of <i>I</i><sub>ON</sub>/<i>I</i><sub>OFF</sub> up to 100 can be obtained in the device architecture considered. The device architecture presented here may enable semiconducting behavior in graphene for digital and analogue electronics
Observation of Switchable Photoresponse of a Monolayer WSe<sub>2</sub>–MoS<sub>2</sub> Lateral Heterostructure via Photocurrent Spectral Atomic Force Microscopic Imaging
In the pursuit of two-dimensional
(2D) materials beyond graphene, enormous advances have been made in
exploring the exciting and useful properties of transition metal dichalcogenides
(TMDCs), such as a permanent band gap in the visible range and the
transition from indirect to direct band gap due to 2D quantum confinement,
and their potential for a wide range of device applications. In particular,
recent success in the synthesis of seamless monolayer lateral heterostructures
of different TMDCs via chemical vapor deposition methods has provided
an effective solution to producing an in-plane p–n junction,
which is a critical component in electronic and optoelectronic device
applications. However, spatial variation of the electronic and optoelectonic
properties of the synthesized heterojunction crystals throughout the
homogeneous as well as the lateral junction region and the charge
carrier transport behavior at their nanoscale junctions with metals
remain unaddressed. In this work, we use photocurrent spectral atomic
force microscopy to image the current and photocurrent generated between
a biased PtIr tip and a monolayer WSe<sub>2</sub>–MoS<sub>2</sub> lateral heterostructure. Current measurements in the dark in both
forward and reverse bias reveal an opposite characteristic diode behavior
for WSe<sub>2</sub> and MoS<sub>2</sub>, owing to the formation of
a Schottky barrier of dissimilar properties. Notably, by changing
the polarity and magnitude of the tip voltage applied, pixels that
show the photoresponse of the heterostructure are observed to be selectively
switched on and off, allowing for the realization of a hyper-resolution
array of the switchable photodiode pixels. This experimental approach
has significant implications toward the development of novel optoelectronic
technologies for regioselective photodetection and imaging at nanoscale
resolutions. Comparative 2D Fourier analysis of physical height and
current images shows high spatial frequency variations in substrate/MoS<sub>2</sub> (or WSe<sub>2</sub>) contact that exceed the frequencies
imposed by the underlying substrates. These results should provide
important insights in the design and understanding of electronic and
optoelectronic devices based on quantum confined atomically thin 2D
lateral heterostructures
Lipid Exchange Envelope Penetration (LEEP) of Nanoparticles for Plant Engineering: A Universal Localization Mechanism
Nanoparticles offer clear advantages
for both passive and active penetration into biologically important
membranes. However, the uptake and localization mechanism of nanoparticles
within living plants, plant cells, and organelles has yet to be elucidated. Here, we examine the subcellular uptake and kinetic
trapping of a wide range of nanoparticles for the first time, using
the plant chloroplast as a model system, but validated in vivo in
living plants. Confocal visible and near-infrared fluorescent microscopy
and single particle tracking of gold-cysteine-AF405 (GNP-Cys-AF405),
streptavidin-quantum dot (SA-QD), dextran and polyÂ(acrylic acid) nanoceria,
and various polymer-wrapped single-walled carbon nanotubes (SWCNTs),
including lipid-PEG-SWCNT, chitosan-SWCNT and 30-base (dAdT) sequence
of ssDNA (AT)<sub>15</sub> wrapped SWCNTs (hereafter referred to as
ssÂ(AT)<sub>15</sub>-SWCNT), are used to demonstrate that particle
size and the magnitude, but not the sign, of the zeta potential are
key in determining whether a particle is spontaneously and kinetically
trapped within the organelle, despite the negative zeta potential
of the envelope. We develop a mathematical model of this lipid exchange
envelope and penetration (LEEP) mechanism, which agrees well with
observations of this size and zeta potential dependence. The theory
predicts a critical particle size below which the mechanism fails
at all zeta potentials, explaining why nanoparticles are critical
for this process. LEEP constitutes a powerful particulate transport
and localization mechanism for nanoparticles within the plant system
Layer Number Dependence of MoS<sub>2</sub> Photoconductivity Using Photocurrent Spectral Atomic Force Microscopic Imaging
Atomically thin MoS<sub>2</sub> is of great interest for electronic and optoelectronic applications because of its unique two-dimensional (2D) quantum confinement; however, the scaling of optoelectronic properties of MoS<sub>2</sub> and its junctions with metals as a function of layer number as well the spatial variation of these properties remain unaddressed. In this work, we use photocurrent spectral atomic force microscopy (PCS-AFM) to image the current (in the dark) and photocurrent (under illumination) generated between a biased PtIr tip and MoS<sub>2</sub> nanosheets with thickness ranging between <i>n</i> = 1 to 20 layers. Dark current measurements in both forward and reverse bias reveal characteristic diode behavior well-described by Fowler–Nordheim tunneling with a monolayer barrier energy of 0.61 eV and an effective barrier scaling linearly with layer number. Under illumination at 600 nm, the photocurrent response shows a marked decrease for layers up to <i>n</i> = 4 but increasing thereafter, which we describe using a model that accounts for the linear barrier increase at low <i>n</i>, but increased light absorption at larger <i>n</i> creating a minimum at <i>n</i> = 4. Comparative 2D Fourier analysis of physical height and photocurrent images shows high spatial frequency spatial variations in substrate/MoS<sub>2</sub> contact that exceed the frequencies imposed by the underlying substrates. These results should aid in the design and understanding of optoelectronic devices based on quantum confined atomically thin MoS<sub>2</sub>
Experimental Observation of Real Time Molecular Dynamics Using Electromigrated Tunnel Junctions
Single
molecule tunnel junctions (SMTJs) can provide important
physical insights into electronic and vibrational phenomena at the
molecular scale. However, observations and analysis are typically
confined to sufficiently low temperatures as to suppress molecular
motion and the resulting stochastic fluctuations in the tunneling
current. In this work, we introduce and experimentally validate a
methodology whereby a slightly higher temperature (9 K) compared to
a typical SMTJ study can be used to induce sparse fluctuations in
the inelastic tunneling current and provide the fingerprints of dynamics
between the conformational states of the molecule. Two examples of
benzene dithiol and cysteine are studied in electromigratively formed
W/Au nanowire SMTJs on SiO<sub>2</sub> at 9 K. The second-order transform
of the tunneling current reveals the expected vibrational spectra.
However, we show that temporal fluctuations can be analyzed using
a hidden Markov Model to reveal dynamics assigned to millisecond rearrangements
of the molecule, with apparent energy barriers ranging from 35 to
66 meV, consistent with theoretical predictions. The observed transitions
are consistent with a model of lateral migration of the thiol-anchored
molecules in an asymmetric junction. The use of temperature in SMTJs
in this way can provide new insights into molecule dynamics in confined
volumes and at electrode interfaces