Investigation of the mechanism of the anomalous Hall effects in Cr2Te3/(BiSb)2(TeSe)3 heterostructure

The interplay between ferromagnetism and the non-trivial topology has unveiled intriguing phases in the transport of charges and spins. For example, it is consistently observed the so-called topological Hall effect (THE) featuring a hump structure in the curve of the Hall resistance (Rxy) vs. a magnetic field (H) of a heterostructure consisting of a ferromagnet (FM) and a topological insulator (TI). The origin of the hump structure is still controversial between the topological Hall effect model and the multi-component anomalous Hall effect (AHE) model. In this work, we have investigated a heterostructure consisting of BixSb2-xTeySe3-y (BSTS) and Cr2Te3 (CT), which are well-known TI and two-dimensional FM, respectively. By using the so-called minor-loop measurement, we have found that the hump structure observed in the CT/BSTS is more likely to originate from two AHE channels. Moreover, by analyzing the scaling behavior of each amplitude of two AHE with the longitudinal resistivities of CT and BSTS, we have found that one AHE is attributed to the extrinsic contribution of CT while the other is due to the intrinsic contribution of BSTS. It implies that the proximity-induced ferromagnetic layer inside BSTS serves as a source of the intrinsic AHE, resulting in the hump structure explained by the two AHE model

Investigation of the mechanism of the anomalous Hall effects in Cr2Te3/(BiSb)2(TeSe)3 heterostructure

The interplay between ferromagnetism and the non-trivial topology has unveiled intriguing phases in the transport of charges and spins. For example, it is consistently observed the so-called topological Hall effect (THE) featuring a hump structure in the curve of the Hall resistance (Rxy) vs. a magnetic field (H) of a heterostructure consisting of a ferromagnet (FM) and a topological insulator (TI). The origin of the hump structure is still controversial between the topological Hall effect model and the multi-component anomalous Hall effect (AHE) model. In this work, we have investigated a heterostructure consisting of BixSb2−xTeySe3−y (BSTS) and Cr2Te3 (CT), which are well-known TI and two-dimensional FM, respectively. By using the so-called minor-loop measurement, we have found that the hump structure observed in the CT/BSTS is more likely to originate from two AHE channels. Moreover, by analyzing the scaling behavior of each amplitude of two AHE with the longitudinal resistivities of CT and BSTS, we have found that one AHE is attributed to the extrinsic contribution of CT while the other is due to the intrinsic contribution of BSTS. It implies that the proximity-induced ferromagnetic layer inside BSTS serves as a source of the intrinsic AHE, resulting in the hump structure explained by the two AHE model.This work was supported by the Korea Institute of Science and Technol‑ogy (KIST) through 2E31550 and by the National Research Foundation program through NRF-2021M3F3A2A03017782, 2021M3F3A2A01037814, 2021M3F3A2A01037738, 2021R1A2C3011450, and 2020R1A2C200373211,[Innovative Talent Education Program for Smart City] by MOLI

LENS-GRM Applicability Analysis and Evaluation

Recently, there have been many abnormal natural phenomena caused by climate change. Anthropogenic factors associated with insufficient water resource management can be another cause. Among natural causes, rainfall intensity and volume often induce flooding. Therefore, accurate rainfall estimation and prediction can prevent and mitigate damage caused by these hazards. Sadly, uncertainties often hinder accurate rainfall forecasting. This study investigates the uncertainty of the Korean rainfall ensemble prediction data and runoff analysis model in order to enhance reliability and improve prediction. The objectives of this study include: (i) evaluating the spatial characteristics and applicability of limited area ensemble prediction system (LENS) data; (ii) understanding uncertainty using parameter correction and generalized likelihood uncertainty estimation (GLUE) and grid-based rainfall-runoff model (GRM); (iii) evaluating models before and after LENS-GRM correction. In this study, data from the Wicheon Basin was used. The informal likelihood (R2, NSE, PBIAS) and formal likelihood (log-normal) were used to evaluate model applicability. The results confirmed that uncertainty of the behavioral model exists using the likelihood threshold when applying the runoff model to rainfall forecasting data. Accordingly, this method is expected to enable more reliable flood prediction by reducing the uncertainties of the rainfall ensemble data and the runoff model when selecting the behavioral model for the user’s uncertainty analysis. It also provides a basis for flood prediction studies that apply rainfall and geographical characteristics for rainfall-runoff uncertainty analysis

Assessment of Uncertainty in Grid-Based Rainfall-Runoff Model Based on Formal and Informal Likelihood Measures

Damage prevention from the local storms and typhoons in Korea, the development of a rainfall-runoff model reflecting local geological, meteorological and physical characteristics is necessary. The accuracy of the rainfall-runoff model is influenced by the various uncertainty factors that can occur in the modeling processes, including input data, model parameters, modeling simplification, and so on. Thus, the objectives of this study are (1) to estimate runoff for two rainfall events using Grid Rainfall-Runoff Model (GRM); (2) to quantify the uncertainty of the GRM model using the Generalized Likelihood Uncertainty Estimation (GLUE) method, and (3) to assess the uncertainty ranges of the GRM based on different likelihood functions. For this, two rainfall events were implemented to the GRM in the Cheongmicheon watershed, and informal likelihood functions (LNSE, LPBIAS, LRSR, and LLOG) based on the fitness indices (NSE, PBIAS, RSR, and Log-normal) were used for uncertainty analysis and quantification using GLUE method. As a result, the GRM parameters varied according to the different rainfall patterns even in the same watershed. In addition, among the GRM parameters, the CRC (Channel Roughness Coefficient) and CSHC (Correction factor for Soil Hydraulic Conductivity) characteristics are the most sensitive. Moreover, this study showed that the uncertainty range of the GRM model can be changed with the subjective selection of likelihood functions and thresholds. The GRM model is open source and has good accessibility. Especially, this open-source model allows various approaches to disaster prevention plans such as flood forecasting and flood insurance policies. In addition, if the parameter range of GRM is quantified and standardized at domestic watersheds, it is expected that the reliability of the rainfall-runoff simulation can be increased by the reduction of the uncertainty factors

Weak ferromagnetism in CdMnZnTe single crystal

We studied the magnetic properties of diluted magnetic semiconductors Cd0.65–yMn0.35Zny Te single crystals grown using a vertical Bridgman method. The Cd0.65–yMn0.35Zny Te crystals with various Zn mole fractions have been grown in the zinc-blende structure. The band-gap energy obtained from the optical absorption spectrum at 300 K is linearly increased with increasing the addition of Zn into CdMnTe, which may be due to a decrease in the lattice constant. We have observed that the Cd0.22Mn0.35Zn0.43Te crystal showed weak ferromagnetic ordering up to 300 K, and the coercive field was 25 Oe at 250 K. The magnetic moment showed a maximum for the sample with y = 0.43, and the value was approximately ten times larger than that of the Cd0.65Mn0.35Te crystal. This result reflects that Zn ion mediates and enhances the spin-spin interaction between Mn2+ ions with increasing Zn composition up to y = 0.43.ope

Giant Faraday rotation in Cd1&#8211;xMnxTe (0 < x < 0.82) crystals

We investigated the magneto-optical properties of diluted magnetic semiconductors Cd1-xMnxTe crystals grown using a vertical Bridgman method. This material crystallizes in the zinc-blende structure for values of x < 0.82. The band-gap energy was depended on Mn mole fraction x linearly and increased with decreasing temperature. The increase of the energy gap with increasing x may be due to a decrease in the lattice constant. Faraday rotation as a function of photon energy with various Mn compositions for CdMnTe in the temperature range of 10-300 K has been measured. The Faraday rotation was increased as the photon energy increased near to that of the fundamental band gap. Verdet constant becomes larger since the effect of the sp-d exchange interaction is enhanced as the temperature is lowered.ope

Development of Deep Learning Models to Improve the Accuracy of Water Levels Time Series Prediction through Multivariate Hydrological Data

Since predicting rapidly fluctuating water levels is very important in water resource engineering, Long Short-Term Memory (LSTM) and Gated Recurrent Unit (GRU) were used to evaluate water-level-prediction accuracy at Hangang Bridge Station in Han River, South Korea, where seasonal fluctuations were large and rapidly changing water levels were observed. The hydrological data input to each model were collected from the Water Resources Management Information System (WAMIS) at the Hangang Bridge Station, and the meteorological data were provided by the Seoul Observatory of the Meteorological Administration. For high-accuracy high-water-level prediction, the correlation between water level and collected hydrological and meteorological data was analyzed and input into the models to determine the priority of the data to be trained. Multivariate input data were created by combining daily flow rate (DFR), daily vapor pressure (DVP), daily dew-point temperature (DDPT), and 1-hour-max precipitation (1HP) data, which are highly correlated with the water level. It was possible to predict improved high water levels through the training of multivariate input data of LSTM and GRU. In the prediction of water-level data with rapid temporal fluctuations in the Hangang Bridge Station, the accuracy of GRU’s predicted water-level data was much better in most multivariate training than that of LSTM. When multivariate training data with a large correlation with the water level were used by the GRU, the prediction results with higher accuracy (R2=0.7480–0.8318; NSE=0.7524–0.7965; MRPE=0.0807–0.0895) were obtained than those of water-level prediction results by univariate training

A Case Study of Tidal Analysis Using Theory-Based Artificial Intelligence Techniques for Disaster Management in Taehwa River, South Korea

Monitoring tidal dynamics is imperative to disaster management because it requires a high level of precision to avert possible dangers. Good knowledge of the physical drivers of tides is vital to achieving such a precision. The Taehwa River in Ulsan City, Korea experiences tidal currents in the estuary that drains into the East Sea. The contribution of wind to tide prediction is evaluated by comparing tidal predictions using harmonic analysis and three deep learning models. Harmonic analysis is conducted on hourly water level data from 2010&ndash;2021 using the commercial pytides toolbox to generate constituents and predict tidal elevations. Three deep learning models of long short-term memory (LSTM), gated recurrent unit (GRU), and bi-directional lstm (BiLSTM) are fitted to the water level and wind speed to evaluate wind and no-wind scenarios. Results show that Taehwa tides are categorized as semidiurnal tides based on a computed form ratio of 0.2714 in a 24-h tidal cycle. The highest tidal range of 0.60 m is recorded on full moon spring tide indicating the significant lunar pull. Wind effect improved tidal prediction NSE of optimal LSTM model from 0.67 to 0.90. Knowledge of contributing effect of wind will inform flood protection measures to enhance disaster preparedness

Development of Water Level Prediction Improvement Method Using Multivariate Time Series Data by GRU Model

The methods for improving the accuracy of water level prediction were proposed in this study by selecting the Gated Recurrent Unit (GRU) model, which is effective for multivariate learning at the Paldang Bridge station in Han River, South Korea, where the water level fluctuates seasonally. The hydrological data (i.e., water level and flow rate) for Paldang Bridge station were entered into the GRU model; the data were provided by the Water Resources Management Information System (WAMIS), and the meteorological data for Seoul Meteorological Observatory and Yangpyeong Meteorological Observatory were provided through the Korea Meteorological Administration. Correlation analysis was used to select the training data for hydrological and meteorological data. Important input data affecting the daily water level (DWL) were daily flow rate (DFR), daily vapor pressure (DVP), daily dew point temperature (DDPT), and 1 h max precipitation (1HP), and were used as the multivariate learning data for water level prediction. However, the DWL prediction accuracy did not improve even if the meteorological data from a single meteorological observatory far from the DWL prediction point were used as the multivariate learning data. Therefore, in this study, methods for improving the predictive accuracy of DWL through multivariate learning that effectively utilize meteorological data from each meteorological observatory were presented. First, it was a method of arithmetically averaging meteorological data for two meteorological observatories and using it as the multivariate learning data for the GRU model. Second, a method was proposed to use the meteorological data of the two meteorological observatories as multivariate learning data by weighted averaging the distances from each meteorological observatory to the water level prediction point. Therefore, in this study, improved water level prediction results were obtained even if data with some correlation between meteorological data provided by two meteorological observatories located far from the water level prediction point were used