Sustained release gel (polymer-free) of itraconazole-loaded microemulsion for oral candidiasis treatment: time-kill kinetics and cellular uptake

AbstractItraconazole (ICZ) was prepared in a self-microemulsifying (SM) gel. This gel was intended for use in the oral mucosa, where low volume and flow of saliva result in limited solubility and absorption of drugs that are poorly water-soluble. The drug-loaded gel formulation (ICZ-SM) was selected as a clear solution in the ternary phase diagram to improve the solubility of ICZ. Seven ratios (S1–S7) were prepared by mixing polyoxyl 35 castor oils (P35), a medium chain with a blend of mono-, di-, and triglycerides (MCT), and water. Phase separation of large-sized emulsions by countering with artificial saliva were observed in dilution tests for the formulation contained MCT, P35, and water at the ratios of 70:20:10 (S1), 10:80:10 (S3), and 20:60:20 (S4). Formulations in the ratios of 15:50:35 (S5) and 19:43:38 (S6) produced strong ICZ-SM gels, as shown by rheology tests, whereas the formulations at the ratios of 30:60:10 (S2) and 10:43:47 (S7) exhibited no elasticity. A model of zero-order kinetic (S5) and first-order kinetic (S6) were found to best fit the release kinetics of ICZ from the gels. Time-killing assays revealed that S5 and S6 required less time compared with S2 and the ICZ solution. Furthermore, S5 exhibited the highest increase in cell uptake compared with S2, S6, and the ICZ solution. These findings suggest that the ICZ-SM gel was a free polymer capable of delivering an ICZ for the treatment of oral candidiasis, and that ICZ-SM gels applied locally exhibit enhanced absorption into cells

Improvement in Solubility and Absorption of Nifedipine Using Solid Solution: Correlations between Surface Free Energy and Drug Dissolution

Ternary solid solutions composed of nifedipine (NDP), amino methacrylate copolymer (AMCP), and polysorbate (PS) 20, 60, or 65 were prepared using a solvent evaporation method. The dissolution profiles of NDP were used to study the effect of the addition of polysorbate based on hydrophilic properties. A solid solution of NDP and AMCP was recently developed; however, the dissolution of NDP was <70%. In the present study, polysorbate was added to improve the dissolution of the drug by altering its hydrophilicity. The suitable formulation contained NDP and AMCP at a ratio of 1:4 and polysorbate at a concentration of 0.1%, 0.3%, or 0.6%. Differential scanning calorimetry and powder X-ray diffraction were used to examine the solid solutions. No peak representing crystalline NDP was observed in any solid solution samples, suggesting that the drug was molecularly dispersed in AMCP. The NDP dissolution from NDP powder and solid solution without PS were 16.82% and 58.19%, respectively. The highest dissolution of NDP of approximately 95.25% was noted at 120 min for the formulation containing 0.6% PS20. Linear correlations were observed between the surface free energy and percentages of dissolved NDP (R2 = 0.7115–0.9315). Cellular uptake across Caco-2 was selected to determine the drug permeability. The percentages of cellular uptake from the NDP powder, solid solution without and with PS20 were 0.25%, 3.60%, and 7.27%, respectively

Preparation and Characterization of Nifedipine-Loaded Dry Medium Internal-Phase Emulsions (Dry MIPEs) to Improve Cellular Permeability

A nifedipine (NP) dry emulsion was fabricated by the adsorption of medium internal-phase emulsions (MIPEs). Simple homogenizers were first used to mix conventional liquid MIPEs, and then a microfluidizer was used to reduce the resulting emulsions’ droplet sizes. The dry MIPEs (solid) were produced by adsorbing the emulsions onto solid carriers with a high surface area. The dry MIPEs were diluted in a simulated gastric fluid under gentle agitation to form emulsions. The diluted dry MIPEs were divided into three groups based on an NP content of 0.3%, 0.5%, and 0.7%, with sizes of 5026–5404 nm, 2583–3233 nm, and 1318–1618 nm in diameter, respectively. Powder X-ray diffraction (PXRD) measurements and differential scanning calorimetry (DSC) were used to characterize the physical properties of the dry MIPEs. The samples contained 0.5% or 0.7% drug, 2–4% surfactant, and 8–16% oil (5RH2/8, 7RH2/8, and 7RH4/16) and showed the characteristic peak for NP. No NP peak was observed in formulations with 0.3% NP and any oil-phase content (3RH2/8, 3RH4/16, and 3RH8/32). The formulations with 0.5% drug, 4–8% surfactant, 16–32% oil (5RH4/16 and 5RH8/32) and those with 0.7% drug, 8% surfactant, and 32% oil (7RH8/32) also did not show the peak for NP. These findings demonstrated that microfluidization improved the solubility of NP in the formulations. The subsequent drug dissolution results were consistent with the DSC thermogram and PXRD pattern results. 3RH2/8, 3RH4/16, 3RH8/32, 5RH4/16, 5RH8/32, and 7RH8/32 were completely dissolved and showed higher dissolved NP amounts than 5RH2/8, 7RH2/8, 7RH4/16, and NP powder. The lowest mean dissolution time was for 7RH8/32 (13.31 ± 0.87 min). Caco-2 cells were used to determine drug uptake, and 7RH8/32 showed the maximum intracellular uptake (10.89%). After storage under accelerated and normal conditions (3 and 6 months), the selected formulations remained stable. The developed formulations can be used to improve NP solubility and absorption

Improved dissolution of Kaempferia parviflora extract for oral administration by preparing solid dispersion via solvent evaporation

Kaempferia parviflora, a plant in the family Zingiberaceae, has been used in Thai traditional medicines for treating hypertension and promoting longevity with good health and well-being. However, its limited aqueous solubility and low dissolution restrict its bioavailability. The aim of the study was therefore to improve the dissolution rate of K. parviflora extracted with dichloromethane (KPD) by solid dispersions. Different water-soluble polymers were applied to improve dissolution of KPD. The solid dispersions in different ratios were prepared by solvent evaporation method. Only hydroxypropyl methylcellulose (HPMC) and polyvinyl alcohol-polyethylene glycol grafted copolymer (PVA-co-PEG) could be used to produce homogeneous, powdered solid dispersions. Physical characterization by scanning electron microscopy, hot stage microscopy, differential scanning calorimetry and powder X-ray diffractometry, in comparison with corresponding physical mixtures, showed the changes in solid state during the formation of solid dispersions. Dissolution of a selected marker, 5,7,4′-trimethoxyflavone (TMF), from KPD/HPMC and KPD/PVA-co-PEG solid dispersions was significantly improved, compared with pure KPD. The dissolution enhancement by solid dispersion was influenced by both type and content of polymers. The stability of KPD/HPMC and KPD/PVA-co-PEG solid dispersions was also good after 6-month storage in both long-term and accelerated conditions. These results identified that the KPD/HPMC and KPD/PVA-co-PEG solid dispersions were an effective new approach for pharmaceutical application of K. parviflora

Impact of Fixed Oil on Ostwald Ripening of Anti-Oral Cancer Nanoemulsions Loaded with Amomum kravanh Essential Oil

Recently, essential oil from Amomum kravanh (AMO) was reported to exert anti-oral cancer effects. Although it was more effective after being loaded into nanoemulsions, AMO without an Ostwald ripening inhibitor was unable to form stable nanoemulsions because of the Ostwald ripening phenomenon. In this study, we examined the influence of Ostwald ripening inhibitors, such as fixed oils and polyethylene glycol 4000 (PEG 4000), on nanoemulsion properties prepared by a phase inversion temperature method. Several fixed oils, including virgin coconut oil (VCO), palm oil (PMO), olive oil (OLO), and PEG 4000, were evaluated, and their Ostwald ripening inhibitory effects were compared. The results suggest that the type and ratio of AMO:fixed oils influence the formation and characteristics of nanoemulsions. PEG 4000 was unable to produce nanoemulsions; however, stable nanoemulsions with small droplet sizes were observed in preparations containing OLO and VCO at an AMO:fixed oil ratio of 80:20, which may be the result of specific molecular interactions among the components. Using an MTT assay, we demonstrated that the AMO:OLO (80:20) nanoemulsion produced the most significant cytotoxic effect on oral cancer cells with a percentage of 99.68 ± 0.56%. Furthermore, the AMO:OLO 80:20 nanoemulsion inhibits metastasis and induces oral cancer cell death through the intrinsic apoptosis pathway. In conclusion, AMO nanoemulsion with anti-oral cancer activity was successfully produced by varying the amount and type of fixed oils. In the future, this discovery may lead to the development of stable nanoemulsions employing additional volatile oils

New Approach for Preparing Solid Lipid Nanoparticles with Volatile Oil-Loaded Quercetin Using the Phase-Inversion Temperature Method

Quercetin (QCT), a natural flavonoid, is of research interest owing to its pharmacological properties. However, its pharmacokinetic limitations could hinder its widespread therapeutic use. Nanocarriers, especially solid lipid nanoparticles (SLNs), might overcome this constraint. This study aimed to investigate QCT-loaded SLNs prepared via a new approach using a volatile oil. The phase-inversion temperature method was used to incorporate rosemary oil (RMO) into SLNs prepared using solid lipids possessing different chemical structures. Among the solid lipids used in the formulations, trilaurin (TLR) exhibited the smallest particle size and good stability after a temperature cycling test. SLNs prepared with a ratio of RMO to TLR of 1:3 could load QCT with an entrapment efficiency of >60% and drug loading of ~2% w/w. The smallest particle size was achieved using the polyoxyethylene-hydrogenated castor oil RH40, and the particle size depended on the concentration. The drug-release profile of QCT_TLR exhibited prolonged biphasic release for >24 h. QCT_TLR was a safe formulation, as indicated by a cell viability percentage of >75% at <2% v/v. In a computer simulation, the system with RMO enabled smaller sized SLNs than those without RMO. This new discovery shows great promise for producing SLNs via the phase-inversion temperature method with incorporation of volatile oil, particularly for delivering compounds with limited water solubility