Design of Optical/IR Blocking Filters for the Lynx X-Ray Microcalorimeter

The Lynx mission concept, under development ahead of the 2020 Astrophysics Decadal Review, includes the Lynx X-ray Microcalorimeter (LXM) as one of its primary instruments. The LXM uses a microcalorimeter array at the focus of a high-throughput soft x-ray telescope to enable high-resolution nondispersive spectroscopy in the soft x-ray waveband (0.2 to 15 keV) with exquisite angular resolution. Similar to other x-ray microcalorimeters, the LXM uses a set of blocking filters mounted within the dewar that pass the photons of interest (x-rays) while attenuating the out-of-band long-wavelength radiation. Such filters have been successfully used on previous orbital and suborbital instruments; however, the Lynx science objectives, which emphasize observations in the soft x-ray band (<1keV), pose more challenging requirements on the set of LXM blocking filters. We present an introduction to the design of the LXM optical/IR blocking filters and discuss recent advances in filter capability targeted at LXM. In addition, we briefly describe the external filters and the modulated x-ray sources to be used for onboard detector calibration

Corrugated Silicon Platelet Feed Horn Array for CMB Polarimetry at 150 GHz

Next generation cosmic microwave background (CMB) polarization anisotropy measurements will feature focal plane arrays with more than 600 millimeter-wave detectors. We make use of high-resolution photolithography and wafer-scale etch tools to build planar arrays of corrugated platelet feeds in silicon with highly symmetric beams, low cross-polarization and low side lobes. A compact Au-plated corrugated Si feed designed for 150 GHz operation exhibited performance equivalent to that of electroformed feeds: ~-0.2 dB insertion loss, <-20 dB return loss from 120 GHz to 170 GHz, <-25 dB side lobes and <-23 dB cross-polarization. We are currently fabricating a 50 mm diameter array with 84 horns consisting of 33 Si platelets as a prototype for the SPTpol and ACTpol telescopes. Our fabrication facilities permit arrays up to 150 mm in diameter.Comment: 12 pages; SPIE proceedings for Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy V (Conference 7741, June 2010, San Diego, CA, USA

ELT Contributions to The First Explosions

The large aperture and sensitive optical and near infrared imager spectrographs will enable an ELT system to observe some supernovae at large distances, deep into cosmological history when supernovae first began to occur.Comment: A Whitepaper Submitted to the Astro 2020 Decadal Survey Committe

Stellar GADGET: A smooth particle hydrodynamics code for stellar astrophysics and its application to Type Ia supernovae from white dwarf mergers

Mergers of two carbon-oxygen white dwarfs have long been suspected to be progenitors of Type Ia Supernovae. Here we present our modifications to the cosmological smoothed particle hydrodynamics code Gadget to apply it to stellar physics including but not limited to mergers of white dwarfs. We demonstrate a new method to map a one-dimensional profile of an object in hydrostatic equilibrium to a stable particle distribution. We use the code to study the effect of initial conditions and resolution on the properties of the merger of two white dwarfs. We compare mergers with approximate and exact binary initial conditions and find that exact binary initial conditions lead to a much more stable binary system but there is no difference in the properties of the actual merger. In contrast, we find that resolution is a critical issue for simulations of white dwarf mergers. Carbon burning hotspots which may lead to a detonation in the so-called violent merger scenario emerge only in simulations with sufficient resolution but independent of the type of binary initial conditions. We conclude that simulations of white dwarf mergers which attempt to investigate their potential for Type Ia supernovae should be carried out with at least 10^6 particles.Comment: 11 pages, 6 figures, accepted for publication in MNRA