Control of Lipid Metabolism by Adipocyte FGFR1-mediated Adipohepatic Communication During Hepatic Stress

Background: Endocrine FGF19 and FGF21 exert their effects on metabolic homeostasis through fibroblast growth factor receptor (FGFR) and co-factor betaKlotho (KLB). Ileal FGF19 regulates bile acid metabolism through specifically FGFR4-KLB in hepatocytes where FGFR1 is not significant. Both FGF19 and FGF21 activate FGFR1-KLB whose function predominates in adipocytes. Recent studies using administration of FGF19 and FGF21 and genetic ablation of KLB or adipocyte FGFR1 indicate that FGFR1-KLB mediates the response of adipocytes to both FGF21 and FGF19. Here we show that adipose FGFR1 regulates lipid metabolism through direct effect on adipose tissue and indirect effects on liver under starvation conditions that cause hepatic stress. Methods: We employed adipocyte-specific ablations of FGFR1 and FGFR2 genes in mice, and analyzed metabolic consequences in adipose tissue, liver and systemic parameters under normal, fasting and starvation conditions. Results: Under normal conditions, the ablation of adipose FGFR1 had little effect on adipocytes, but caused shifts in expression of hepatic genes involved in lipid metabolism. Starvation conditions precipitated a concurrent elevation of serum triglycerides and non-esterified fatty acids, and increased hepatic steatosis and adipose lipolysis in the FGFR1-deficient mice. Little effect on glucose or ketone bodies due to the FGFR1 deficiency was observed. Conclusions: Our results suggest an adipocyte-hepatocyte communication network mediated by adipocyte FGFR1 that concurrently dampens hepatic lipogenesis and adipocyte lipolysis. We propose that this serves overall to mete out and extend lipid reserves for neural fuels (glucose and ketone bodies), while at the same time governing extent of hepatosteatosis during metabolic extremes and other conditions causing hepatic stress

Microtissues Enhance Smooth Muscle Differentiation and Cell Viability of hADSCs for Three Dimensional Bioprinting

Smooth muscle differentiated human adipose derived stem cells (hADSCs) provide a crucial stem cell source for urinary tissue engineering, but the induction of hADSCs for smooth muscle differentiation still has several issues to overcome, including a relatively long induction time and equipment dependence, which limits access to abundant stem cells within a short period of time for further application. Three-dimensional (3D) bioprinting holds great promise in regenerative medicine due to its controllable construction of a designed 3D structure. When evenly mixed with bioink, stem cells can be spatially distributed within a bioprinted 3D structure, thus avoiding drawbacks such as, stem cell detachment in a conventional cell-scaffold strategy. Notwithstanding the advantages mentioned above, cell viability is often compromised during 3D bioprinting, which is often due to pressure during the bioprinting process. The objective of our study was to improve the efficiency of hADSC smooth muscle differentiation and cell viability of a 3D bioprinted structure. Here, we employed the hanging-drop method to generate hADSC microtissues in a smooth muscle inductive medium containing human transforming growth factor β1 and bioprinted the induced microtissues onto a 3D structure. After 3 days of smooth muscle induction, the expression of α-smooth muscle actin and smoothelin was higher in microtissues than in their counterpart monolayer cultured hADSCs, as confirmed by immunofluorescence and western blotting analysis. The semi-quantitative assay showed that the expression of α-smooth muscle actin (α-SMA) was 0.218 ± 0.077 in MTs and 0.082 ± 0.007 in Controls; smoothelin expression was 0.319 ± 0.02 in MTs and 0.178 ± 0.06 in Controls. Induced MTs maintained their phenotype after the bioprinting process. Live/dead and cell count kit 8 assays showed that cell viability and cell proliferation in the 3D structure printed with microtissues were higher at all time points compared to the conventional single-cell bioprinting strategy (mean cell viability was 88.16 ± 3.98 vs. 61.76 ± 15% for microtissues and single-cells, respectively). These results provide a novel way to enhance the smooth muscle differentiation of hADSCs and a simple method to maintain better cell viability in 3D bioprinting

Differential Specificity of Endocrine FGF19 and FGF21 to FGFR1 and FGFR4 in Complex with KLB

Background: Recent studies suggest that betaKlotho (KLB) and endocrine FGF19 and FGF21 redirect FGFR signaling to regulation of metabolic homeostasis and suppression of obesity and diabetes. However, the identity of the predominant metabolic tissue in which a major FGFR-KLB resides that critically mediates the differential actions and metabolism effects of FGF19 and FGF21 remain unclear. Methodology/Principal Findings: We determined the receptor and tissue specificity of FGF21 in comparison to FGF19 by using direct, sensitive and quantitative binding kinetics, and downstream signal transduction and expression of early response gene upon administration of FGF19 and FGF21 in mice. We found that FGF21 binds FGFR1 with much higher affinity than FGFR4 in presence of KLB; while FGF19 binds both FGFR1 and FGFR4 in presence of KLB with comparable affinity. The interaction of FGF21 with FGFR4-KLB is very weak even at high concentration and could be negligible at physiological concentration. Both FGF19 and FGF21 but not FGF1 exhibit binding affinity to KLB. The binding of FGF1 is dependent on where FGFRs are present. Both FGF19 and FGF21 are unable to displace the FGF1 binding, and conversely FGF1 cannot displace FGF19 and FGF21 binding. These results indicate that KLB is an indispensable mediator for the binding of FGF19 and FGF21 to FGFRs that is not required for FGF1. Although FGF19 can predominantly activate the responses of the liver and to a less extent the adipose tissue, FGF21 can do so significantly only in the adipose tissue an

Consensus Recommendations by the Asian Pacific Society of Cardiology: Optimising Cardiovascular Outcomes in Patients with Type 2 Diabetes

The Asian Pacific Society of Cardiology convened a consensus statement panel for optimising cardiovascular (CV) outcomes in type 2 diabetes, and reviewed the current literature. Relevant articles were appraised using the Grading of Recommendations, Assessment, Development and Evaluation system, and consensus statements were developed in two meetings and were confirmed through online voting. The consensus statements indicated that lifestyle interventions must be emphasised for patients with prediabetes, and optimal glucose control should be encouraged when possible. Sodium–glucose cotransporter 2 inhibitors (SGLT2i) are recommended for patients with chronic kidney disease with adequate renal function, and for patients with heart failure with reduced ejection fraction. In addition to SGLT2i, glucagon-like peptide-1 receptor agonists are recommended for patients at high risk of CV events. A blood pressure target below 140/90 mmHg is generally recommended for patients with type 2 diabetes. Antiplatelet therapy is recommended for secondary prevention in patients with atherosclerotic CV disease

Photo-degradation dynamics of five neonicotinoids: Bamboo vinegar as a synergistic agent for improved functional duration.

The effects of photo-degradation on the utilization of pesticides in agricultural production has been investigated. Various influencing factors were compared, with results showing that the initial pesticide concentration, light source, water quality and pH possessed different effects on neonicotinoids photo-degradation. The initial concentration and pH were found to be most critical effects. The photo-degradation rate decreased by a factor of 2-4 when the initial concentration increased from 5 mg L-1 to 20 mg L-1, particularly for acetamiprid and imidacloprid. The photo-degradation pathways and products of the five neonicotinoids were also investigated, with similar pathways found for each pesticide, except for acetamiprid. Degradation pathways mainly involved photo-oxidation processes, with products identified using liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-Q-TOF-MS) found to be consistent with literature reported results. Bamboo vinegar exerted a photo-quenching effect on the neonicotinoids, with an improved efficiency at higher vinegar concentrations. The photo-quenching rates of thiamethoxam and dinotefuran were 381.58% and 310.62%, respectively, when a 30-fold dilution of vinegar was employed. The photo-degradation products in bamboo vinegar were identical to those observed in methanol, with acetic acid being the main factor influencing the observed quenching effects

Effects of Spodumene Flotation Tailings on Mechanical Properties of Acid-Based Geopolymer Mortar

This study focuses on using spodumene flotation tailings (SFT) to prepare phosphoric acid-activated metakaolin geopolymer, in which the replacement of metakaolin (MK) by a high percentage (up to 75 wt.%) of tailings was achieved. The compressive strength of geopolymer mortar was significantly improved with SFT as aggregates. In addition, the mechanical properties could also be enhanced by an increased concentration of phosphoric acid (H3PO4) solution or a decreased aggregate particle size. The optimized geopolymer mortar composite was SFT:MK = 3:1, which was activated by H3PO4 solution with a concentration of 51 vol%, followed by curing at 55 °C for 24 h. On the other hand, properties of the geopolymer mortar could also be affected by the morphology of the aggregates. For example, SFT as aggregates could produce more interconnected pores compared to standard sand. The major chemical structural units of geopolymer mortar were -P-O-Al- and AlPO4, which could be spontaneously generated according to the thermodynamic calculation results. Finally, many aluminum ions and a small amount of silicon ions could be leached from the tailings under acidic conditions

Antioxidant Activity of Leaf Extracts from Different Hibiscus sabdariffa Accessions and Simultaneous Determination Five Major Antioxidant Compounds by LC-Q-TOF-MS

Hibiscus sabdariffa has gained attention for its antioxidant activity. There are many accessions of H. sabdariffa in the world. However, information on the quantification of antioxidant compounds in different accessions is rather limited. In this paper, a liquid chromatography/quadrupole-time-of-flight mass spectrometry (LC-Q-TOF-MS) method for simultaneous determination of five antioxidant compounds (neochlorogenic acid, chlorogenic acid, cryptochlorogenic acid, rutin, and isoquercitrin) in H. sabdariffa leaves was developed. The method was validated for linearity, sensitivity, precision, repeatability and accuracy. The validated method has been successfully applied for determination of the five analytes in eight accessions of H. sabdariffa. The eight accessions of H. sabdariffa were evaluated for their antioxidant activities by DPPH free radical scavenging assay. The investigated accessions of H. sabdariffa were rich in rutin and exhibited strong antioxidant activity. The two accessions showing the highest antioxidant activities were from Cuba (No. 2) and Taiwan (No. 5). The results indicated that H. sabdariffa leaves could be considered as a potential antioxidant source for the food industry. The developed LC-Q-TOF-MS method is helpful for quality control of H. sabdariffa