Effect of grid system on finite element calculation

Detailed parametric studies of the effect of grid system on finite element calculation for potential flows were made. These studies led to the formulation of a design criteria for optimum mesh system and the development of two methods to generate the optimum mesh system. The guidelines for optimum mesh system are: (1) the mesh structure should be regular; (2) the element should be as regular and equilateral as possible; (3) the distribution of size of element should be consistent with that of flow variables to insure maximum uniformity in error distribution; (4) for non-Dirichlet boundary conditions, smaller boundary elements or higher order interpolation functions should be used; and (5) the mesh should accommodate the boundary geometry as accurately as possible. The results of the parametric studies are presented

Prospect of Making Ceramic Shell Mold by Ceramic Laser Fusion

Manufacturing prototypical castings by conventional investment casting not only takes several weeks, but also is prohibitively expensive. Z Corporation in USA, EOS GmbH and IPT in Germany employ the techniques of 3DP and SLS respectively to make directly ceramic shell molds for metal castings. Although those techniques dramatically reduce time expenditure and production cost, each layer cannot be thinner than 50 µm because of using powder to pave layers. The dimensional accuracy and roughness of the castings still cannot meet the specification of precision casting. Therefore, in this paper the ceramic laser fusion (CLF) was used to pave layers. Each layer can be thinner than 25 µm, so that the step effect can be diminished and the workpiece surface can be smoother; drying time will be shortened dramatically. Moreover, the inherent solid-state support formed by green portion has the capability of preventing upward and downward deformation of the scanned cross sections. In order to make shell mold which meets the roughness requirement (Rq=3.048µm) of the precision casting, following issues have to be further studied: (1) design a proper ceramic shell mold structure, (2) design a paving chamber for paving a complete green layer which can be easily collapsed, (3) cut down drying time, (4) optimize laser scanning process parameters with the smallest distortion, (5) eliminate sunken area, (6) reduce layer thickness to less than13µm, (7) control power to guarantee the energy uniformly absorbed by workpiece, and (8) develop a method which can directly clean green portion in cavity from gate.Mechanical Engineerin

Optically pumped GaAs surface laser with corrugation feedback

A GaAs distributed-feedback laser was fabricated and pumped optically. A narrow stimulated spectrum was obtained around 0.83 µ with threshold pumping power of ~2 × 10^5 W/cm^2

Cooper pair islanding model of insulating nanohoneycomb films

We first review evidence for the Cooper pair insulator (CPI) phase in amorphous nanohoneycomb (NHC) films. We then extend our analysis of superconducting islands induced by film thickness variations in NHC films to examine the evolution of island sizes through the magnetic field-driven SIT. Finally, using the islanding picture, we present a plausible model for the appearance and behavior of the CPI phase in amorphous NHC films.Comment: 7 pages, 3 figure

The Stabilization of Superconductivity by Magnetic Field in Out-of-Equilibrium Nanowires

A systematic study has been carried out on the previously reported "magnetic-field-induced superconductivity" of Zn nanowires. By varying parameters such as magnetic field orientation and wire length, the results provide evidence that the phenomenon is a nonequilibrium effect associated with the boundary electrodes. They also suggest there are two length scales involved, the superconducting coherence length and quasiparticle relaxation length. As wire lengths approach either of these length scales, the effect weakens. We demonstrate that it is appropriate to consider the effect to be a stabilization of superconductivity, that has been suppressed by an applied current.Comment: (Updated Version) 9 pages, 8 figure

Structural Anomalies at the Magnetic and Ferroelectric Transitions in RMn2O5RMn_2O_5 (R=Tb, Dy, Ho)

Strong anomalies of the thermal expansion coefficients at the magnetic and ferroelectric transitions have been detected in multiferroic $RMn_2O_5$. Their correlation with anomalies of the specific heat and the dielectric constant is discussed. The results provide evidence for the magnetic origin of the ferroelectricity mediated by strong spin-lattice coupling in the compounds. Neutron scattering data for $HoMn_2O_5$ indicate a spin reorientation at the two low-temperature phase transitions

Asymptotic expansion for reversible A + B <-> C reaction-diffusion process

We study long-time properties of reversible reaction-diffusion systems of type A + B C by means of perturbation expansion in powers of 1/t (inverse of time). For the case of equal diffusion coefficients we present exact formulas for the asymptotic forms of reactant concentrations and a complete, recursive expression for an arbitrary term of the expansions. Taking an appropriate limit we show that by studying reversible reactions one can obtain "singular" solutions typical of irreversible reactions.Comment: 6 pages, no figures, to appear in PR

Gentrification and Displacement in the San Francisco Bay Area: A Comparison of Measurement Approaches.

Gentrification may play an important role in influencing health outcomes, but few studies have examined these associations. One major barrier to producing empirical evidence to establish this link is that there is little consensus on how to measure gentrification. To address this barrier, we compared three gentrification classification methodologies in relation to their ability to identify neighborhood gentrification in nine San Francisco Bay Area counties: the Freeman method, the Landis method, and the Urban Displacement Project (UDP) Regional Early Warning System. In the 1580 census tracts, 43% of the population had a bachelor's degree or higher. The average median household income was $79,671 in 2013. A comparison of gentrification methodologies revealed that the Landis and Freeman methodologies characterized the vast majority of census tracts as stable, and only 5.2% and 6.1% of tracts as gentrifying. UDP characterized 46.7% of tracts at risk, undergoing, or experiencing advanced stages of gentrification and displacement. There was substantial variation in the geographic location of tracts identified as gentrifying across methods. Given the variation in characterizations of gentrification across measures, studies evaluating associations between gentrification and health should consider using multiple measures of gentrification to examine the robustness of the study findings across measures