Does hygrothermal degradation of Mode I fatigue delamination resistance in carbon fibre reinforced polymer laminates depend on the ageing conditions?

Hygrothermal ageing has detrimental effect of the fatigue delamination growth (FDG) in carbon fibre reinforced polymer laminates, and may increase the crack growth rate by a factor of ∼5. The paper examines, how this degradation for Mode I fatigue delamination is affected by the severity of the ageing conditions. Fatigue delamination tests for R = 0.1 and R = 0.5 are conducted after ageing (1) at 70 °C 85 % relative humidity (RH) and (2) immersion in 70 °C water bath (WB). Paris-type FDG characterisation is derived, in the form, which accounts for the effect of fibre bridging. It is demonstrated that parameters of FDG degradation do not differ for these two types of hygrothermal ageing. The physical reasons for this are examined using dynamic mechanical thermal analysis (DMTA) and fractographic analysis, which revealed similar irreversible degradation of the material near the fibre/matrix interface and in the matrix itself, and the similar damage mechanisms in fatigue delamination. Furthermore, this study can highlight the importance of obeying similitude principles in FDG characterisation, and provide extra information for the ISO standard development for mode I fatigue delamination in unidirectional carbon fibre reinforced polymer composites.Group Alderlieste

In-situ damage mechanism investigation and a prediction model for delamination with fibre bridging in composites

Carbon-fibre reinforced composites are susceptible to delamination. Fibre bridging is an important shielding mechanism frequently observed in delamination. The presence of these bridging fibres can significantly increase interlaminar resistance, making it critical to represent this phenomenon for delamination characterization in composite laminates. To this end, in-situ SEM examinations were carried out to thoroughly explore damage mechanisms around delamination front as well as in bridging fibres. It was found that micro-cracks initiated at fibre–matrix interface can gradually develop and coalesce into micro-delaminations ahead of the main crack. The accumulation of these micro-delaminations can finally cause macro delamination propagation. The performance of bridging fibres can be summarized as three typical stages, i.e. bending, fibre–matrix peeling and final breakage with crack opening. Subsequently, theoretical discussions on bridging stress distribution were conducted in accordance with these bridging mechanism examinations, contributing to a new traction-separation constitutive to represent fibre bridging performance. A FEA prediction model was finally developed to characterize delamination behavior with fibre bridging. The simulation results can agree well with the experimental data in the entire delamination, demonstrating its effectiveness in fibre-bridged delamination representation. This study also demonstrated the importance of having in-depth understanding on fibre bridging mechanisms to appropriately represent bridging performance during delamination growth in composite laminates.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Structural Integrity & Composite

Fatigue delamination behavior in composite laminates at different stress ratios and temperatures

This study provides an investigation on mode I fatigue delamination growth (FDG) with fibre bridging at different R-ratios and temperatures in carbon-fibre reinforced polymer composites. FDG experiments were first conducted at different temperatures of R-ratios 0.1 and 0.5 via unidirectional double cantilever beam (DCB) specimens. A fatigue model, employing both the strain energy release rate (SERR) range and the maximum SERR around crack front as similitude parameter, was proposed to interpret FDG behavior. The use of this model can collapse FDG data with fibre bridging at different R-ratios into one master curve, obeying well with the similitude principles. Accordingly, it was found that FDG can accelerate with elevated temperature, but decrease at sub-zero temperature. Furthermore, there are strong correlations between the fatigue model parameters and temperature using this model in FDG interpretations. Taking these correlations into account can extend the model to accurately predict FDG behavior of other temperatures. Fractographic examinations demonstrated that temperature has effects on the FDG damage mechanisms. Both fibre/matrix interfacial debonding and matrix brittle failure were observed in FDG of −40℃. Fibre/matrix interfacial debonding becomes the dominant failure in FDG of RT and 80℃. No obvious difference on the fracture morphology was identified for FDG at different R-ratios of a given temperature.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Structural Integrity & Composite

Mode I fatigue delamination growth with fibre bridging in multidirectional composite laminates

Fatigue delamination in multidirectional composite laminates was experimentally investigated in present study. Both the Paris relation and a modified Paris relation (with a new similitude parameter) were employed to interpret fatigue delamination with significant fibre bridging. The results clearly demonstrated that fatigue delamination was independent of fibre bridging, if a reasonable similitude parameter was used in data reduction. As a result, a master resistance curve can be fitted to determine fatigue crack growth with different amounts of fibre bridging. The energy principles were subsequently used to provide physical interpretation on fatigue delamination. The results indicated the energy release for the same fatigue crack growth remained constant with fibre bridging. Bridging fibres in most cases just periodically stored and released strain energy under fatigue loading, but had little contribution to real energy release. The master resistance curve was finally applied to predict fatigue delamination with fibre bridging. Acceptable agreement between predictions and experiments was achieved, demonstrating the validation of the modified Paris relation in fibre-bridged fatigue delamination study.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Structural Integrity & Composite