138 research outputs found
Rosuvastatin attenuates contrast-induced nephropathy through modulation of nitric oxide, inflammatory responses, oxidative stress and apoptosis in diabetic male rats
Bio-Inspired Hydrogels via 3D Bioprinting
Many soft tissues of the human body such as cartilages, muscles, and ligaments are mainly composed of biological hydrogels possessing excellent mechanical properties and delicate structures. Nowadays, bio-inspired hydrogels have been intensively explored due to their promising potential applications in tissue engineering. However, the traditional manufacturing technology is challenging to produce the bio-inspired hydrogels, and the typical biological composite topologies of bio-inspired hydrogels are accessible completed using 3D bioprinting at micrometer resolution. In this chapter, the 3D bioprinting techniques used for the fabrication of bio-inspired hydrogels were summarized, and the materials used were outlined. This chapter also focuses on the applications of bio-inspired hydrogels fabricated using available 3D bioprinting technologies. The development of 3D bioprinting techniques in the future would bring us closer to the fabrication capabilities of living organisms, which would be widely used in biomedical applications
Alginate-Based Composite and Its Biomedical Applications
Alginate has received much attention due to its biocompatibility. However, the properties of pure alginate are limited, such as weak mechanical strength, which limits its application. Alginate-based composite effectively overcomes the defect of pure alginate. The molecular weight and microstructure can be designed. More importantly, the essential properties for clinical application are improved, including mechanical properties, biocompatibility, gelation ability, chondrogenic differentiation and cell proliferation. This chapter will describe development of alginate-based composite in biomedical application. In the fields of wound dressing, drug delivery, and tissue engineering, the impact of structural changes on performance has been stated. To provide readers with understanding of this chapter, the structure and characterization of alginate will be included
Fungal diversity and mycotoxin contamination in dried fish products in Zhanjiang market, China
Dried fish are important dietary protein and income sources in Zhanjiang, China. Mycotoxins produced by pathogenic fungi that contaminate fish during processing can cause considerable hazard to consumer health. This study reports fungal diversity, total fungal counts and mycotoxin contamination of dried fish sold at the seafood market in Zhanjiang. Seven dried fish products (Hemibarbus maculatus, Pseudosciaena crocea, Lutjanus erythopterus, Thunnus thynnus, Scomberomorus niphonius, Eleutheronema tetradactylum, Trichiurus lepturus, n = 10) from seven retailers were analyzed for contaminated fungal species, occurrence frequency and residues analysis of four mycotoxins. Using potato dextrose agar (PDA) plate purification, morphology observation, internal transcribed spacer (ITS) sequence analysis, 25 fungal strains representing 12 genera from dried fish were systematically isolated and identified. Three dominant genera in dried fish were Fusarium sp. (80.4%), Penicillium sp. (70.7%) and Aspergillus sp.(63.9%). Other fungal genera were Neoscytalidium sp.(38.1%), Cutaneotrichosporon sp. (38.1%), Trichoderma sp.(20.3%), Naganishia sp.(15.3%), Kodamaea sp. (10.8%), Phialemoniopsis sp.(9.2%), Nigrospora sp.(7.3%), Ceriporia sp.(6.3%), Phellinus sp.(4.5%). Aspergillus flavus contamination was the higher and ranged from 1.10 × 10³ to 2.40 × 10⁴ cfu/g. The mean fungal contamination of other fungal species in dried fish ranged from 1.07 × 10² to 4.58 × 104 cfu/g. The total fungal counts of Fusarium sp. ranged from 1.09 × 10² to 2.11 × 10⁴ cfu/g, but the occurrence frequency is relatively high. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) analyses showed that mycotoxin residues were present in 12 out of the 25 dried fish tested. Aflatoxin B1 (AFB₁) was the most frequently detected and the concentration ranged from 0.03 to 3.52 μg/kg. T-2 toxin (T-2), ochratoxin A (OTA), and deoxynivalenol (DON) concentrations ranged from 0.21 to 1.53, 0.03–2.21 and 0.71 μg/kg respectively. High occurrence of fungal populations and mycotoxins in dried fish sold in the Zhanjiang market pose a potential threat to consumer health. It is recommended that in future, advanced processing methods and controlled storage condition need to be used to minimize and if possible eliminate fungal contamination during dried fish processing
Neuroticism Modulates the Functional Connectivity From Amygdala to Frontal Networks in Females When Avoiding Emotional Negative Pictures
Amygdala activity was previously found to correlate with neuroticism as an effect of valence, but so far few studies have focused on motivational context. The network subserving altered amygdala activity has not yet been investigated although some studies showed strong effective connections with prefrontal cortex (PFC). The goal of this study was to test the modulatory role of neuroticism on the functional connectivity (FC) between amygdala and other brain regions, especially PFC, during emotion processing from motivational direction. We applied an emotional picture viewing paradigm with different motivational directions (approaching and avoiding) in a large participant sample. The results showed that neuroticism predicted the amount of amygdala FC to dorsomedial PFC (dmPFC) and middle cingulate cortex (MCC). Increased FC during negative vs. positive pictures was found primarily in low neuroticism subjects, especially during the avoid condition. This valence and motivation dependent connectivity increase were disrupted for high neurotic participants. No effect of neuroticism was found for the approach condition. We showed that neuroticism, especially in the context of passive affect regulation, may have impaired connectivity between amygdala and putative regulatory cortical networks
Utility of S100A12 as an Early Biomarker in Patients With ST-Segment Elevation Myocardial Infarction
Importance: S100A12 is a calcium binding protein which is involved in inflammation and progression of atherosclerosis.
Objective: We sought to investigate the utility of S100A12 as a biomarker for the early diagnosis and prognostication of patients presenting with ST-segment elevation myocardial infarction (STEMI).
Design, Setting, and Participants: S100A12 was measured in 1023 patients presenting to the emergency department with acute chest pain between June 2012 and November 2015. An independent cohort of 398 patients enrolled at 3 different hospitals served as a validation cohort.
Main Outcomes and Measures: The primary clinical endpoint of interest was major adverse cardiac and cerebral events (MACCE) defined as a composite of all-cause death, MI, stroke, or hospitalization for heart failure.
Results: A total of 438/1023 patients (42.8%) in the diagnosis cohort were adjudicated as STEMI, among whom plasma S100A12 levels increased within 30 min and peaked 1–2 h after symptom onset. Compared with high-sensitivity cardiac troponin T and creatine kinase-MB isoenzyme, S100A12 more accurately identified STEMI, especially within the first 2 h after symptom onset (area under the curve 0.963 compared with 0.860 for hscTnT and 0.711 for CK-MB, both P \u3c 0.05). These results were consistent in the 243-patient validation cohort. The 1-year rate of MACCE was greatest in patients in the highest peak S100A12 tertile, intermediate in the middle tertile and least in the lowest tertile (9.3 vs. 5.7 vs. 3.0% respectively, Ptrend = 0.0006). By multivariable analysis the peak plasma concentration of S100A12 was an independent predictor of MACCE within 1 year after STEMI (HR, 1.001, 95%CI, 1.000–1.002; P = 0.0104). Zhang et al. S100A12 as a STEMI Biomarker
Conclusions and Relevance: S100A12 rapidly identified patients with STEMI, more accurately than other cardiac biomarkers, especially within the first 2 h after symptom onset. The peak plasma S100A12 level was a strong predictor of 1-year prognosis after STEMI
Robust estimation of bacterial cell count from optical density
Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data
- …