Measured and calculated seismic velocities and densities for granulites from xenolith occurrences and adjacent exposed lower crustal sections: A comparative study from the North China craton

Granulites from the Neogene xenolith-bearing Hannuoba alkaline basalt and from the Manjinggou-Wayaokou exposed lower crustal section in the Archean Huai'an terrain, which occurs within and surrounds the Hannuoba basalt, provide a unique opportunity for a comparative study on petrophysical properties and composition of the lower crust represented by these two types of samples. P and S wave velocities and densities of 12 Hannuoba lower crustal xenoliths and one associated spinel lherzolite xenolith as well as nine granulites and granulite-facies metasedimentary rocks from the Archean Huai'an terrain were measured in laboratory at pressures up to 600 MPa and temperatures up to 600°C. Calculations of P and S wave velocities were also made for the same suite of samples based on modal mineralogy and single-crystal velocities whose variations with composition are considered by using microprobe analyses and velocities of end members. The measured and calculated Vp at room temperature and 600 MPa, where the microcrack effect is considered to be almost eliminated, agree within 4% for rocks from the Manjinggou-Wayaokou section and the adjacent Wutai-Jining upper crustal to upper lower crustal section. In contrast, the xenoliths show systematically lower measured Vp by up to 15% relative to calculated velocities, even if decompression-induced products of kelyphite and glass are taken into account. The lower measured velocities for xenoliths are attributed to grain boundary alteration and residual porosity. This implies that although granulite xenoliths provide direct information about lower crustal constitution and chemical composition, they are not faithful samples for studying in situ seismic properties of the lower crust in terms of measured velocities due to alterations during their entrainment to the surface, which changes their physical properties significantly. In this respect, granulites from high-grade terrains are better samples because they are not subjected to significant changes during their slow transport to the surface and because physical properties depend primarily on mineralogy in addition to pressure and temperature. On the other hand, calculated velocities for granulite xenoliths are consistent with velocities for granulites from terrains, suggesting that they can be also used to infer lower crust composition by correlating with results from seismic refraction studies. Copyright 2000 by the American Geophysical Union.published_or_final_versio

Analysis of Slab and Slab Heater Cover in a Compact Endless Cast and Rolling Mill Process using Finite Element Methods

Compact Endless cast and rolling Mill (CEM) processes were developed and used to fabricate steel products such as steel slabs. However, the coiling furnace in this process was very expensive, so a new layout was suggested. As the coiling furnace was removed, the interval among the slab heaters had to be increased. This led to a temperature drop in the slab. The temperature distribution of the slab impacts quality, so new layout was developed. This paper presents a Finite Element Method (FEM) simulation of thermal behavior in the slab employing slab heater covers. All of the simulation results were verified by comparing them with experimental results. The slab moving distance at which the temperature was saturated during the process was determined to consider the steady-state and analyze the temperature distribution of the slab and slab heater. Those results revealed that the efficiency of heat conservation increased by more than 50% using the slab heater cover. Finally, a sensitivity analysis of the slab heater cover was conducted with respect to the cover design. The effects of insulator thickness, the gap distance between the slab and cover, and material parameters such as density, and specific heat were investigated to optimize the design of the slab heater cover to produce the best quality slab.11Ysciescopuskc

Temperature dependence of the electronic structure of the J(eff)=12 Mott insulator Sr2IrO4 studied by optical spectroscopy

We investigated the temperature-dependent evolution of the electronic structure of the J(eff)=1/2 Mott insulator Sr2IrO4 using optical spectroscopy. The optical conductivity spectra sigma(omega) of this compound has recently been found to exhibit two d-d transitions associated with the transition between the J(eff)=1/2 and J(eff)=3/2 bands due to the cooperation of the electron correlation and spin-orbit coupling. As the temperature increases, the two peaks show significant changes resulting in a decrease in the Mott gap. The experimental observations are compared with the results of first-principles calculation in consideration of increasing bandwidth. We discuss the effect of the temperature change in the electronic structure of Sr2IrO4 in terms of local lattice distortion, excitonic effect, electron-phonon coupling, and magnetic ordering.open69575

Engineered Saccharomyces cerevisiae for lignocellulosic valorization: a review and perspectives on bioethanol production

The biorefinery concept, consisting in using renewable biomass with economical and energy goals, appeared in response to the ongoing exhaustion of fossil reserves. Bioethanol is the most prominent biofuel and has been considered one of the top chemicals to be obtained from biomass. Saccharomyces cerevisiae, the preferred microorganism for ethanol production, has been the target of extensive genetic modifications to improve the production of this alcohol from renewable biomasses. Additionally, S. cerevisiae strains from harsh industrial environments have been exploited due to their robust traits and improved fermentative capacity. Nevertheless, there is still not an optimized strain capable of turning second generation bioprocesses economically viable. Considering this, and aiming to facilitate and guide the future development of effective S. cerevisiae strains, this work reviews genetic engineering strategies envisioning improvements in 2nd generation bioethanol production, with special focus in process-related traits, xylose consumption, and consolidated bioprocessing. Altogether, the genetic toolbox described proves S. cerevisiae to be a key microorganism for the establishment of a bioeconomy, not only for the production of lignocellulosic bioethanol, but also having potential as a cell factory platform for overall valorization of renewable biomasses.This work was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UIDB/04469/2020, the PhD grants [SFRH/BD/ 130739/2017 to CEC; SFRH/BD/146367/2019 to POS; SFRH/ BD/132717/2017 to SLB], the MIT-Portugal Program [PhD Grant PD/BD/128247/2016 to JTC], BioTecNorte operation [NORTE-01-0145-FEDER-000004] and Biomass and Bioenergy Research Infrastructure (BBRI)- LISBOA-01-0145-FEDER- 022059] funded by the European Regional Development Fund (ERDF) under the scope of Norte2020 - Programa Operacional Regional do Norte.info:eu-repo/semantics/publishedVersio

Intravaginal Administration of Fc-Fused IL7 Suppresses the Cervicovaginal Tumor by Recruiting HPV DNA Vaccine-Induced CD8 T Cells

Purpose: The induction of tissue-localized virus-specific CD8 T-cell response is essential for the development of an effective therapeutic vaccine against genital diseases, such as cervical cancer and genital herpes. Here, we aimed to elucidate the immunologic role of IL7 in the induction of mucosal cellular immunity. Experimental Design: IL7 was engineered through Fc fusion to enhance mucosal delivery across the genital epithelial barrier. The immunomodulatory role of IL7 was evaluated by monitoring the kinetics of various immune cells and measuring the expression of chemokines and cytokines after intravaginal administration of Fc-fused IL7 (IL7-Fc). The antitumor effects of intramuscular human papillomavirus (HPV) DNA vaccine or topical IL7-Fc alone or in a combinational regimen on mice survival were compared using a orthotopic cervical cancer model. Results: Intravaginal treatment of IL7-Fc, but not native IL7, induces upregulation of chemokines (CXCL10, CCL3, CCL4, and CCL5), cytokines (IFN-gamma, TNF alpha, IL6, and IL1 beta), and an adhesion molecule (VCAM-1) in the genital tract, leading to the recruitment of several leukocytes, including CD4, CD8, gamma delta T cells, and dendritic cells. Importantly, in this murine cervical cancer model, topical administration of IL7-Fc after intramuscular HPV DNA vaccination increases the number of HPV-specific CD8 T cells in the genital mucosa, but not in the spleen, leading to stronger antitumor activity than the HPV DNA vaccine alone. Conclusions: Our findings provide an important insight into the immunomodulatory role of IL7-Fc via topical application and the design of therapeutic vaccine regimen that induces effective genital-mucosal CD8 T-cell responses.1110Ysciescopu

Resonances in J/ψ→ϕπ+π−J/\psi \to \phi \pi ^+\pi ^- and ϕK+K−\phi K^+K^-

A partial wave analysis is presented of $J/\psi \to \phi \pi ^+\pi ^-$ and $\phi K^+K^-$ from a sample of 58M $J/\psi$ events in the BES II detector. The $f_0(980)$ is observed clearly in both sets of data, and parameters of the Flatt\' e formula are determined accurately: $M = 965 \pm 8$ (stat) $\pm 6$ (syst) MeV/c$^2$, $g_1 = 165 \pm 10 \pm 15$ MeV/c$^2$, $g_2/g_1 = 4.21 \pm 0.25 \pm 0.21$. The $\phi \pi \pi$ data also exhibit a strong $\pi \pi$ peak centred at $M = 1335$ MeV/c$^2$. It may be fitted with $f_2(1270)$ and a dominant $0^+$ signal made from $f_0(1370)$ interfering with a smaller $f_0(1500)$ component. There is evidence that the $f_0(1370)$ signal is resonant, from interference with $f_2(1270)$. There is also a state in $\pi \pi$ with $M = 1790 ^{+40}_{-30}$ MeV/c$^2$ and $\Gamma = 270 ^{+60}_{-30}$ MeV/c$^2$; spin 0 is preferred over spin 2. This state, $f_0(1790)$, is distinct from $f_0(1710)$. The $\phi K\bar K$ data contain a strong peak due to $f_2'(1525)$. A shoulder on its upper side may be fitted by interference between $f_0(1500)$ and $f_0(1710)$.Comment: 17 pages, 6 figures, 1 table. Submitted to Phys. Lett.

First Measurements of eta_c Decaying into K^+K^-2(pi^+pi^-) and 3(pi^+pi^-)

The decays of eta_c to K^+K^-2(pi^+pi^-) and 3(pi^+pi^-) are observed for the first time using a sample of 5.8X10^7 J/\psi events collected by the BESII detector. The product branching fractions are determined to be B(J/\psi-->gamma eta_c)*B(eta_c-->K^+K^-pi^+pi^-pi^+pi^-)=(1.21+-0.32+- 0.23)X10^{-4}$,B(J/\psi-->gamma eta_c)*B(eta_c-->K^{*0}\bar{K}^{*0}pi^+pi^-)= (1.29+-0.43+-0.32)X10^{-4}$, and (J/\psi-->gamma eta_c)* B(eta_c-->pi^+pi^-pi^+pi^-pi^+pi^-)= (2.59+-0.32+-0.48)X10^{-4}. The upper limit for eta_c-->phi pi^+pi^-pi^+pi^- is also obtained as B(J/\psi-->gamma eta_c)*B(eta_c--> phi pi^+pi^-pi^+pi^-)< 6.03 X10^{-5} at the 90% confidence level.Comment: 11 pages, 4 figure

Measurement of the Branching Fraction of J/psi --> pi+ pi- pi0

Using 58 million J/psi and 14 million psi' decays obtained by the BESII experiment, the branching fraction of J/psi --> pi+ pi- pi0 is determined. The result is (2.10+/-0.12)X10^{-2}, which is significantly higher than previous measurements.Comment: 9 pages, 8 figures, RevTex