A unified constitutive model for asymmetric tension and compression creep-ageing behaviour of naturally aged Al-Cu-Li alloy

A set of unified constitutive equations is presented that predict the asymmetric tension and compression creep behaviour and recently observed double primary creep of pre-stretched/naturally aged aluminium-cooper-lithium alloy AA2050-T34. The evolution of the primary micro- and macro-variables related to the precipitation hardening and creep deformation of the alloy during creep age forming (CAF) are analysed and modelled. Equations for the yield strength evolution of the alloy, including an initial reversion and subsequent strengthening, are proposed based on a theory of concurrent dissolution, re-nucleation and growth of precipitates during artificial ageing. We present new observations of so-called double primary creep during the CAF process. This phenomenon is then predicted by introducing effects of interacting microstructures, including evolving precipitates, diffusing solutes and dislocations, into the sinh-law creep model. In addition, concepts of threshold creep stress σth and a microstructure-dependant creep variable H, which behave differently under different external stress directions, are proposed and incorporated into the creep model. This enables prediction of the asymmetric tension and compression creep-ageing behaviour of the alloy. Quantitative transmission electron microscopy (TEM) and related small-angle X-ray scattering (SAXS) analysis have been carried out for selected creep-aged samples to assist the development and calibration of the constitutive model. A good agreement has been achieved between the experimental results and the model. The model has the potential to be applied to creep age forming of other heat-treatable aluminium alloys

Experimental studies and constitutive modelling of anelastic creep recovery during creep age forming

This paper presents a study of anelastic creep recovery during creep-ageing of an aluminium alloy AA7050-TAF. Uniaxial Creep-Ageing and Recovery Test (CART) was used to characterise the influence of anelastic creep strain on total creep deformation for determining the actual amount of springback in creep age forming (CAF) process. CART was performed on aluminium alloy AA7050-TAF at 174°C between the stress levels of 137.5 to 162.5 MPa. A constitutive model was developed for the prediction of the creep-ageing and recovery response of material in creep age forming. A 'back stress' variable was used to represent the net effect of the internal stresses of the material which causes anelastic creep recovery. Other microstructural variables were introduced to model complex micro-mechanisms and hardening effects including solid solution hardening, dislocation hardening, and age hardening. It has been found that the permanent strain after creep-ageing depends not only on total creep strain but also on anelastic strain. Simulation results from the constitutive model developed in this study show a good agreement with experimental data

Effects of asymmetric creep-ageing behaviour on springback of AA2050-T34 after creep age forming

This study investigates the effects of asymmetric creep-ageing behaviour on springback of aluminium alloys during creep age forming (CAF) process. An Al-Cu-Li alloy, AA2050, which shows an apparent asymmetric tension and compression creep-ageing behaviour is used for investigation. Several CAF trial tests to form singly-curved AA2050 plates with different thicknesses (3, 5 and 8 mm) are carried out with a four point bending setup. Meanwhile, two sets of finite element (FE) models of corresponding processes have been developed, in which either the conventional symmetric or the new asymmetric creep-ageing behaviour of the alloy was used. The asymmetric models can well predict the shape of formed plates for thicker materials (5 and 8 mm), while symmetric models provide over-prediction of final deflections. The results from asymmetric models indicate that more creep strain is generated in the tension stressed part of the forming plate than that in the other part with compressive stresses and therefore, resulting in an asymmetric distribution of the relaxed stresses through the thickness of the forming plates after creep-ageing. After springback, both top and bottom surfaces of the formed plates show significant compressive stresses while tensile residual stresses exist in the centre of the formed plates. The work in this study helps to understand the particular springback behaviour of AA2050 with asymmetric creep-ageing behaviour in CAF, and can be used to guide future industrial applications of the alloy in the CAF process

Depression and anxiety in relation to cancer incidence and mortality: a systematic review and meta-analysis of cohort studies

The link between depression and anxiety status and cancer outcomes has been well-documented but remains unclear. We comprehensively quantified the association between depression and anxiety defined by symptom scales or clinical diagnosis and the risk of cancer incidence, cancer-specific mortality, and all-cause mortality in cancer patients. Pooled estimates of the relative risks (RRs) for cancer incidence and mortality were performed in a meta-analysis by random effects or fixed effects models as appropriate. Associations were tested in subgroups stratified by different study and participant characteristics. Fifty-one eligible cohort studies involving 2,611,907 participants with a mean follow-up period of 10.3 years were identified. Overall, depression and anxiety were associated with a significantly increased risk of cancer incidence (adjusted RR: 1.13, 95% CI: 1.06–1.19), cancer-specific mortality (1.21, 1.16–1.26), and all-cause mortality in cancer patients (1.24, 1.13–1.35). The estimated absolute risk increases (ARIs) associated with depression and anxiety were 34.3 events/100,000 person years (15.8–50.2) for cancer incidence and 28.2 events/100,000 person years (21.5–34.9) for cancer-specific mortality. Subgroup analyses demonstrated that clinically diagnosed depression and anxiety were related to higher cancer incidence, poorer cancer survival, and higher cancer-specific mortality. Psychological distress (symptoms of depression and anxiety) was related to higher cancer-specific mortality and poorer cancer survival but not to increased cancer incidence. Site-specific analyses indicated that overall, depression and anxiety were associated with an increased incidence risks for cancers of the lung, oral cavity, prostate and skin, a higher cancer-specific mortality risk for cancers of the lung, bladder, breast, colorectum, hematopoietic system, kidney and prostate, and an increased all-cause mortality risk in lung cancer patients. These analyses suggest that depression and anxiety may have an etiologic role and prognostic impact on cancer, although there is potential reverse causality; Furthermore, there was substantial heterogeneity among the included studies, and the results should be interpreted with caution. Early detection and effective intervention of depression and anxiety in cancer patients and the general population have public health and clinical importance

Host factors do not influence the colonization or infection by fluconazole resistant Candida species in hospitalized patients

Nosocomial yeast infections have significantly increased during the past two decades in industrialized countries, including Taiwan. This has been associated with the emergence of resistance to fluconazole and other antifungal drugs. The medical records of 88 patients, colonized or infected with Candida species, from nine of the 22 hospitals that provided clinical isolates to the Taiwan Surveillance of Antimicrobial Resistance of Yeasts (TSARY) program in 1999 were reviewed. A total of 35 patients contributed fluconazole resistant strains [minimum inhibitory concentrations (MICs) ≧ 64 mg/l], while the remaining 53 patients contributed susceptible ones (MICs ≦ 8 mg/l). Fluconazole resistance was more frequent among isolates of Candida tropicalis (46.5%) than either C. albicans (36.8%) or C. glabrata (30.8%). There was no significant difference in demographic characteristics or underlying diseases among patients contributing strains different in drug susceptibility

Experimental study of regenerative EM -TMD system for building vibration control

Author name used in this publication: S. ZhuRefereed conference paper2011-2012 > Academic research: refereed > Refereed conference paperVersion of RecordPublishe

Design and modeling of a photonic crystal fiber gas sensor

Author name used in this publication: Yeuk L. HooAuthor name used in this publication: Hoi L. HoAuthor name used in this publicaiton: Dong N. Wang2002-2003 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Impact of maternal e-cigarette vapor exposure on renal health in the offspring

© 2019 New York Academy of Sciences. Maternal smoking during pregnancy is a significant risk factor of renal pathology in the offspring. E-cigarettes are perceived to be a safe option and are increasingly used by pregnant women either continuously during pregnancy or as a replacement for tobacco cigarettes. This study aimed to determine the effects of replacing tobacco cigarettes with e-cigarettes during pregnancy, and continuous e-cigarette use during pregnancy on the offspring's kidneys. Female Balb/c mice were exposed to either air (sham) or tobacco cigarette smoke (SE) for 6 weeks prior to mating, during gestation and lactation. A subset of the “SE group” received e-cigarette vapor (containing nicotine) after mating until pups weaned. Additional female mice were continuously exposed to e-vapor (either with or without nicotine) for 6 weeks prior to mating until pups weaned. Kidneys and urine from the male offspring were assessed at postnatal day 1, day 20 (weaning), and 13 weeks of age (adulthood). E-cigarette replacement was less detrimental to renal development and albuminuria than continuous SE during pregnancy. However, continuous e-vapor exposure during pregnancy increased markers of oxidative stress, inflammation, and fibrosis in the adult offspring, independent of nicotine. E-cigarette use during pregnancy confers future risk to the offspring's kidneys

Heat Treated NiP–SiC Composite Coatings: Elaboration and Tribocorrosion Behaviour in NaCl Solution

Tribocorrosion behaviour of heat-treated NiP and NiP–SiC composite coatings was investigated in a 0.6 M NaCl solution. The tribocorrosion tests were performed in a linear sliding tribometer with an electrochemical cell interface. It was analyzed the influence of SiC particles dispersion in the NiP matrix on current density developed, on coefficient of friction and on wear volume loss. The results showed that NiP–SiC composite coatings had a lower wear volume loss compared to NiP coatings. However, the incorporation of SiC particles into the metallic matrix affects the current density developed by the system during the tribocorrosion test. It was verified that not only the volume of co-deposited particles (SiC vol.%) but also the number of SiC particles per coating area unit (and consequently the SiC particles size) have made influence on the tribocorrosion behaviour of NiP–SiC composite coatings

The effects of nail rigidity on fracture healing in rats with osteoporosis

Background and purpose Stress shielding from rigid internal fixation may lead to refracture after removal of the osteosynthesis material. We investigated the effect of a low-rigidity (Ti-24Nb-4Zr-7.9Sn) intramedullary nail regarding stress shielding and bone healing of osteoporotic fractures in the rat