Bionic Hovering Micro-Aerial Vehicle Using Array-Spiracle Wings

Hovering ability is the basis of fixed-point monitoring and tracking of an aircraft. Herein, we propose a new hovering vehicle inspired by bird feathers, with an airfoil composed of passive opening and closing feather units. Two wings of the prototype are vertically distributed and driven in anti-phase linear reciprocation. The lift is generated by the asymmetric flow of air caused by the opening and closing of the feather unit. The design of the vehicle is simple and can be incorporated into a large-area hovering platform for large loads. In this paper, the design and fabrication of the vehicle are described, along with an aerodynamic theoretical model of the vehicle kinematics. The correctness of the model was verified by numerical calculations and tests on the opening and closing characteristics of the plume unit. The opening and closing characteristics of the feather unit were investigated and revealed through controlled-variable experiments. An experimental prototype with a mass of 52 g was built. During preliminary flight tests, the vibration frequency was controlled to verify that the prototype was capable of hovering and vertical takeoff and landing

Quality Factor Enhancement of 650 MHz Superconducting Radio-Frequency Cavity for CEPC

Medium-temperature (mid-T) furnace baking was conducted at 650 MHz superconducting radio-frequency (SRF) cavity for circular electron positron collider (CEPC), which enhanced the cavity unloaded quality factor (Q0) significantly. In the vertical test (2.0 K), Q0 of 650 MHz cavity reached 6.4 × 1010 at 30 MV/m, which is remarkably high at this unexplored frequency. Additionally, the cavity quenched at 31.2 MV/m finally. There was no anti-Q-slope behavior after mid-T furnace baking, which is characteristic of 1.3 GHz cavities. The microwave surface resistance (RS) was also studied, which indicated both very low Bardeen–Cooper–Schrieffer (BCS) and residual resistance. The recipe of cavity process in this paper is simplified and easy to duplicate, which may benefit the SRF community

Stable and oxidative charged Ru enhance the acidic oxygen evolution reaction activity in two-dimensional ruthenium-iridium oxide

Abstract The oxygen evolution reactions in acid play an important role in multiple energy storage devices. The practical promising Ru-Ir based catalysts need both the stable high oxidation state of the Ru centers and the high stability of these Ru species. Here, we report stable and oxidative charged Ru in two-dimensional ruthenium-iridium oxide enhances the activity. The Ru0.5Ir0.5O2 catalyst shows high activity in acid with a low overpotential of 151 mV at 10 mA cm−2, a high turnover frequency of 6.84 s−1 at 1.44 V versus reversible hydrogen electrode and good stability (618.3 h operation). Ru0.5Ir0.5O2 catalysts can form more Ru active sites with high oxidation states at lower applied voltages after Ir incorporation, which is confirmed by the pulse voltage induced current method. Also, The X-ray absorption spectroscopy data shows that the Ru-O-Ir local structure in two-dimensional Ru0.5Ir0.5O2 solid solution improved the stability of these Ru centers