Important prognostic factors for the long-term survival of lung cancer subjects in Taiwan

<p>Abstract</p> <p>Background</p> <p>This study used a large-scale cancer database in determination of prognostic factors for the survival of lung cancer subjects in Taiwan.</p> <p>Methods</p> <p>Total of 24,910 subjects diagnosed with lung cancer was analysed. Survival estimates by Kaplan-Meier methods. Cox proportional-hazards model estimated the death risk (hazard ratio (HR)) for various prognostic factors.</p> <p>Results</p> <p>The prognostic indicators associated with a higher risk of lung cancer deaths are male gender (males versus females; HR = 1.07, 95% confidence intervals (CI): 1.03–1.11), males diagnosed in later periods (shown in 1991–1994 versus 1987–1990; HR = 1.13), older age at diagnosis, large cell carcinoma (LCC)/small cell carcinoma (SCC), and supportive care therapy over chemotherapy. The overall 5-year survival rate for lung cancer death was significantly poorer for males (21.3%) than females (23.6%). Subjects with squamous cell carcinoma (SQCC) and treatment by surgical resection alone had better prognosis. We find surgical resections to markedly increase 5-year survival rate from LCC, decreased risk of death from LCC, and no improved survival from SCC.</p> <p>Conclusion</p> <p>Gender and clinical characteristics (i.e. diagnostic period, diagnostic age, histological type and treatment modality) play important roles in determining lung cancer survival.</p

Вихретоковый анизотропный термоэлектрический первичный преобразователь лучистого потока

Представлена оригинальная конструкция первичного преобразователя лучистого потока, который может служить основой для создания приемника неселективного излучения с повышенной чувствительностью

The 5p15.33 Locus Is Associated with Risk of Lung Adenocarcinoma in Never-Smoking Females in Asia

Genome-wide association studies of lung cancer reported in populations of European background have identified three regions on chromosomes 5p15.33, 6p21.33, and 15q25 that have achieved genome-wide significance with p-values of 10−7 or lower. These studies have been performed primarily in cigarette smokers, raising the possibility that the observed associations could be related to tobacco use, lung carcinogenesis, or both. Since most women in Asia do not smoke, we conducted a genome-wide association study of lung adenocarcinoma in never-smoking females (584 cases, 585 controls) among Han Chinese in Taiwan and found that the most significant association was for rs2736100 on chromosome 5p15.33 (p = 1.30×10−11). This finding was independently replicated in seven studies from East Asia totaling 1,164 lung adenocarcinomas and 1,736 controls (p = 5.38×10−11). A pooled analysis achieved genome-wide significance for rs2736100. This SNP marker localizes to the CLPTM1L-TERT locus on chromosome 5p15.33 (p = 2.60×10−20, allelic risk = 1.54, 95% Confidence Interval (CI) 1.41–1.68). Risks for heterozygote and homozygote carriers of the minor allele were 1.62 (95% CI; 1.40–1.87), and 2.35 (95% CI: 1.95–2.83), respectively. In summary, our results show that genetic variation in the CLPTM1L-TERT locus of chromosome 5p15.33 is directly associated with the risk of lung cancer, most notably adenocarcinoma

Genome-Wide Association Study of Lung Adenocarcinoma in East Asia and Comparison With a European Population

Lung adenocarcinoma is the most common type of lung cancer. Known risk variants explain only a small fraction of lung adenocarcinoma heritability. Here, we conducted a two-stage genome-wide association study of lung adenocarcinoma of East Asian ancestry (21,658 cases and 150,676 controls; 54.5% never-smokers) and identified 12 novel susceptibility variants, bringing the total number to 28 at 25 independent loci. Transcriptome-wide association analyses together with colocalization studies using a Taiwanese lung expression quantitative trait loci dataset (n = 115) identified novel candidate genes, including FADS1 at 11q12 and ELF5 at 11p13. In a multi-ancestry meta-analysis of East Asian and European studies, four loci were identified at 2p11, 4q32, 16q23, and 18q12. At the same time, most of our findings in East Asian populations showed no evidence of association in European populations. In our studies drawn from East Asian populations, a polygenic risk score based on the 25 loci had a stronger association in never-smokers vs. individuals with a history of smoking (Pinteraction = 0.0058). These findings provide new insights into the etiology of lung adenocarcinoma in individuals from East Asian populations, which could be important in developing translational applications

Genome-wide association study of lung adenocarcinoma in East Asia and comparison with a European population

Lung adenocarcinoma is the most common type of lung cancer. Known risk variants explain only a small fraction of lung adenocarcinoma heritability. Here, we conducted a two-stage genome-wide association study of lung adenocarcinoma of East Asian ancestry (21,658 cases and 150,676 controls; 54.5% never-smokers) and identified 12 novel susceptibility variants, bringing the total number to 28 at 25 independent loci. Transcriptome-wide association analyses together with colocalization studies using a Taiwanese lung expression quantitative trait loci dataset (n = 115) identified novel candidate genes, including FADS1 at 11q12 and ELF5 at 11p13. In a multi-ancestry meta-analysis of East Asian and European studies, four loci were identified at 2p11, 4q32, 16q23, and 18q12. At the same time, most of our findings in East Asian populations showed no evidence of association in European populations. In our studies drawn from East Asian populations, a polygenic risk score based on the 25 loci had a stronger association in never-smokers vs. individuals with a history of smoking (P interaction  = 0.0058). These findings provide new insights into the etiology of lung adenocarcinoma in individuals from East Asian populations, which could be important in developing translational applications

Genome-wide association study of lung adenocarcinoma in East Asia and comparison with a European population.

Lung adenocarcinoma is the most common type of lung cancer. Known risk variants explain only a small fraction of lung adenocarcinoma heritability. Here, we conducted a two-stage genome-wide association study of lung adenocarcinoma of East Asian ancestry (21,658 cases and 150,676 controls; 54.5% never-smokers) and identified 12 novel susceptibility variants, bringing the total number to 28 at 25 independent loci. Transcriptome-wide association analyses together with colocalization studies using a Taiwanese lung expression quantitative trait loci dataset (n = 115) identified novel candidate genes, including FADS1 at 11q12 and ELF5 at 11p13. In a multi-ancestry meta-analysis of East Asian and European studies, four loci were identified at 2p11, 4q32, 16q23, and 18q12. At the same time, most of our findings in East Asian populations showed no evidence of association in European populations. In our studies drawn from East Asian populations, a polygenic risk score based on the 25 loci had a stronger association in never-smokers vs. individuals with a history of smoking (Pinteraction = 0.0058). These findings provide new insights into the etiology of lung adenocarcinoma in individuals from East Asian populations, which could be important in developing translational applications

An Integrated User Interface of Assessment and Optimization for Architectural Fa&ccedil;ade Shading Designs in Taiwan

In response to sustainable development goals, the architectural industry aims to decrease the high proportion of emissions and energy use in the construction sector. Therefore, the design method of building performance optimization (BPO) has been advocated in recent studies as a method for accomplishing high-performance building design. However, BPO remains difficult to implement in practice due to the lack of a definite process and supporting tools for architects/designers in the early design process. The purpose of this paper is to propose a BPO framework and integrated design decision support (DDS) interface to provide a visual and science-based analysis and assist designers working with high-performance building fa&ccedil;ade designs. The framework and DDS tool are then tested by designers through a practice design of the headquarters fa&ccedil;ade. All the designers started and implemented the facade optimization design in a short training session, although they reported that the developed support tools still needed to be improved in terms of also integrating optimization tools. The characteristics of the user interface help considerably with comparing and making decisions in optimal solutions. The results emphasize the importance of developing design support tools for practical adoption from practical designers&rsquo; perspectives

An Integrated User Interface of Assessment and Optimization for Architectural Façade Shading Designs in Taiwan

In response to sustainable development goals, the architectural industry aims to decrease the high proportion of emissions and energy use in the construction sector. Therefore, the design method of building performance optimization (BPO) has been advocated in recent studies as a method for accomplishing high-performance building design. However, BPO remains difficult to implement in practice due to the lack of a definite process and supporting tools for architects/designers in the early design process. The purpose of this paper is to propose a BPO framework and integrated design decision support (DDS) interface to provide a visual and science-based analysis and assist designers working with high-performance building façade designs. The framework and DDS tool are then tested by designers through a practice design of the headquarters façade. All the designers started and implemented the facade optimization design in a short training session, although they reported that the developed support tools still needed to be improved in terms of also integrating optimization tools. The characteristics of the user interface help considerably with comparing and making decisions in optimal solutions. The results emphasize the importance of developing design support tools for practical adoption from practical designers’ perspectives