A = Assembly Location

The NCP4623 is a CMOS Linear Voltage Regulator designed for wide input voltage range. The maximum operating input voltage is up to 24 V with a minimum voltage starting from 2 V. The Chip Enable (CE) pin allows the device to lower standby current to 0.1 �A typ. The NCP4623 features many protections for any current or thermal sensitive devices with current fold−back protection, thermal shutdown protection, and peak and short current protection. This device is available in adjustable and fixed voltage output in 0.1 V steps. They are available in very thin XDFN6 1.6x1.6x0.4 mm in size and the very popular SOT23−5 and SOT89−5 packages. Please contact your local sales office for additional output voltage options

A = Assembly Location Y = Year

The NCP4588 is a CMOS 200mA LDO which is stable without an output capacitor. This results in a reduction in component count, cost and board area, as well as contributing to a more robust solution in hostile environments. With quiescent current < 9.5 �A and PSRR> 60 dB, the device is an excellent trade off between the two features. The family is available in a variety of packages: SC−70, SOT23 and a small, ultra thin 1.2 x 1.2 x 0.4 mm XDFN

841 = Specific Device Code A = Assembly Location Y = Year

The NUF8401MN is an eight−channel (C−R−C) Pi−style EMI filter array with integrated ESD protection. Its typical component values of R = 100 � and C = 12 pF deliver a cutoff frequency of 175 MHz and stop band attenuation greater than −25 dB from 800 MHz to 2.2 GHz. This performance makes the part ideal for parallel interfaces with data rates up to 117 Mbps in applications where wireless interference must be minimized. The specified attenuation range is very effective in minimizing interference from 2G/3G, GPS, Bluetooth ® and WLAN signals. The NUF8401MN is available in the low−profile 16−lead 1.6 mm x 4.0 mm DFN16 surface mount package. Features/Benefits • ±14 kV ESD Protection on each channel (IEC61000−4−2 Level 4, Contact Discharge) • R/C Values of 100 � and 12 pF deliver Exceptional S21 Performance Characteristics of 175 MHz f3dB and −25 dB Stop Band Attenuatio

Host

The NCP1800 is a constant current, constant voltage (CCCV) lithium ion battery charge controller. The external sense resistor sets the full charging current, and the termination current is 10 % of the Full−Charge current (0.1 C). The voltage is regulated at ±1 % during the final charge stage. There is virtually zero drain on the battery when the input power is removed

Deliveries

• Get a good O.S. internal understanding – P1: Be able to program low level O.S. code, developing from scratch the basic system components – P2: Be able to add functionalities to an existing O.S.

MARKING DIAGRAMS

The NCP4586 is a CMOS 150 mA low dropout linear with low noise, high ripple rejection, low dropout, high output voltage accuracy and low supply current. The device is available in three configurations: enable high, enable low and enable high plus auto−discharge. Small packages allow mounting on high density PCBs. This is an excellent general purpose regulator, well suited to many applications

A = Assembly Location

The NCP4589 is a CMOS 300 mA LDO which switches to a low power mode under light current loads. The device automatically switches back to a fast response mode as the output load increases above 3 mA (typ.). The device can be placed in permanent fast mode through a mode select pin. The family is available in a variety of packages: SC−70, SOT23 and a small, ultra thin 1.2 x 1.2 x 0.4 mm XDFN

845 = Specific Device Code A = Assembly Location

The NUF8600MN is a eight−channel (C−R−C) Pi−style EMI filter array with integrated ESD protection. Its typical component values of R = 50 � and C = 17 pF deliver a cutoff frequency of 115 MHz and stop band attenuation greater than −25 dB from 800 MHz to 2.2 GHz. This performance makes the part ideal for parallel interfaces with data rates up to 77 Mbps in applications where wireless interference must be minimized. The specified attenuation range is very effective in minimizing interference from 2G/3G, GPS, Bluetooth ® and WLAN signals. The NUF8600MN is available in the low−profile 18−lead 1.6 mm x 4.0 mm DFN16 surface mount package.

Agency Efficiency Review Plan Agency: 003- LEGISLATIVE COUNCIL PROGRAM CONSOLIDATION (ERP): STREAMLINING OF SERVICES (ERP): EMPLOYEE AND MANAGEMENT REFORMS (ERP): MANDATES AND REQUIREMENTS (ERP):

The Nebraska Supreme Court has partnered with the National Center for State Courts to conduct a process named "Re-engineering Courts for the 21st Century". Nebraska is one of four states to receive this technical assistance without cost. The purpose is to review the structure and operations of the court system and find ways in which the core functions could be done with more efficiency and essential services performed using the current state of technology

M = Date Code*

The MC74VHC1G66, NLVHC1G66 is a single pole single throw (SPST) analog switch. It achieves high speed propagation delays and low ON resistances while maintaining low power dissipation. This bilateral switch controls analog and digital voltages that may vary across the full power−supply range (from VCC to GND). The MC74VHC1G66, NLVHC1G66 is compatible in function to a single gate of the High Speed CMOS MC74VHC4066 and the metal−gate CMOS MC14066. The device has been designed so that the ON resistances (RON) are much lower and more linear over input voltage than RON of the metal−gate CMOS or High Speed CMOS analog switches. The newer NLVHC offers the same functionality in a 1.2x1.0x0.55mm UDFN6 package. The ON/OFF control inputs are compatible with standard CMOS outputs. The ON/OFF control input structure provides protection when voltages between 0 V and 5.5 V are applied, regardless of the supply voltage. This input structure helps prevent device destruction caused by supply voltage − input/output voltage mismatch, battery backup, hot insertion, etc