A Brief Review of Gel Polymer Electrolytes Using In Situ Polymerization for Lithium-ion Polymer Batteries

Polymer electrolytes (PEs) have been thoroughly investigated due to their advantages that can prevent severe problems of Li-ion batteries, such as electrolyte leakage, flammability, and lithium dendrite growth to enhance thermal and electrochemical stabilities. Gel polymer electrolytes (GPEs) using in situ polymerization are typically prepared by thermal or UV curing methods by initially impregnating liquid precursors inside the electrode. The in situ method can resolve insufficient interfacial problems between electrode and electrolyte compared with the ex situ method, which could led to a poor cycle performance due to high interfacial resistance. In addition to the abovementioned advantage, it can enhance the form factor of bare cells since the precursor can be injected before polymerization prior to the solidification of the desired shapes. These suggest that gel polymer electrolytes prepared by in situ polymerization are a promising material for lithium-ion batteries

A Brief Review of Gel Polymer Electrolytes Using In Situ Polymerization for Lithium-ion Polymer Batteries

Polymer electrolytes (PEs) have been thoroughly investigated due to their advantages that can prevent severe problems of Li-ion batteries, such as electrolyte leakage, flammability, and lithium dendrite growth to enhance thermal and electrochemical stabilities. Gel polymer electrolytes (GPEs) using in situ polymerization are typically prepared by thermal or UV curing methods by initially impregnating liquid precursors inside the electrode. The in situ method can resolve insufficient interfacial problems between electrode and electrolyte compared with the ex situ method, which could led to a poor cycle performance due to high interfacial resistance. In addition to the abovementioned advantage, it can enhance the form factor of bare cells since the precursor can be injected before polymerization prior to the solidification of the desired shapes. These suggest that gel polymer electrolytes prepared by in situ polymerization are a promising material for lithium-ion batteries

Development of Dithieno[3,2-b:2′,3′-d]thiophene (DTT) Derivatives as Solution-Processable Small Molecular Semiconductors for Organic Thin Film Transistors

Novel solution-processable dithieno[3,2-d:2′,3′-d]thiophene (DTT) derivatives with alkylated thiophene or alkyl chain substituents, 2,6-bis(5-octylthiophen-2-yl)dithieno[3,2-b:2′,3′-d]thiophene (compound 1), 2,6-bis(5-(2-ethylhexyl)thiophen-2-yl)dithieno[3,2-b:2′,3′-d]thiophene (compound 2), and 2,6-dioctyldithieno[3,2-b:2′,3′-d]thiophene (compound 3), have been synthesized and employed as small molecular organic semiconductors for organic field-effect transistors (OFETs). All compounds exhibited good thermal stability over 290 °C, while different side groups of DTT compounds afforded different melting temperatures. The molecular orbital energy levels were experimentally and theoretically calculated, and their trend was almost the same. The developed compounds were employed as active layers for top-contact/bottom-gate OFETs with average charge carrier mobility as high as 0.10 cm2/Vs and current on/off ratio > 107 in ambient atmosphere. Notably, DTT derivative with linear alkyl chain (-octyl) substituents showed the best device performance. High device performance could be attributed to the large grains and continuous surface coverages as well as high film texture of the corresponding semiconductor films