Palladium and nickel interactions with stepped 6H-silicon carbide

Silicon carbide (SiC) has long been recognized as a semiconductor with potential for use in a number of demanding environments. Recent developments in the quality of bulk grown 6H-SiC (and other hexagonal poly-types) have increased interest in issues surrounding the stability of device structures that operate at temperatures in excess of 600°C. It has been observed that the performance of metal-semiconductor devices created on SiC tend to degrade when operating at these temperatures. This change in device performance has been linked to inter-diffusion and reaction at the metal-semiconductor interface. Most of these devices have been fabricated on SiC substrates with surface and sub-surface damage associated with the polishing process (standard surfaces). Recent studies have shown that high temperature hydrogen etching of these substrates removes this damage and produces surfaces with wide atomically flat terraces and nanometer scale steps (stepped surfaces). The basic question this poses is, can such improvements in substrate quality lead to improvements in device performance.;The goal of this research is to better understand the interaction of metals on these stepped surfaces. To accomplish this, detailed surface studies of thermally induced Pd-SiC and Ni-SiC surface interactions have been performed on both the standard and stepped surfaces. The metal films range in thickness from the monolayer level (∼0.4 nm) to actual device dimensions (∼50 nm) and are deposited under ultrahigh vacuum conditions at ∼50°C. These films were characterized in-situ using Auger electron spectroscopy both before and after annealing at 670°C for Pd and 700°C for Ni. The Auger lineshapes provide quantitative and qualitative information on the chemistry of the reaction products. Ex-situ atomic force microscopy was used to characterize changes in surface morphology. The results of these experiments yield important insights into the nature of the transport process at the metal-semiconductor interface and the influence of initial surface structure in these processes. In addition differences in the interfacial chemistry for carbide forming metals has been revealed. The results provided insight into the mechanisms where by improvements in substrate quality may lead to improvements in device performance

A New Method to Grow SiC: Solvent-Laser Heated Floating Zone

The solvent-laser heated floating zone (solvent-LHFZ) growth method is being developed to grow long single crystal SiC fibers. The technique combines the single crystal fiber growth ability of laser heated floating zone with solvent based growth techniques (e.g. traveling solvent method) ability to grow SiC from the liquid phase. Initial investigations reported in this paper show that the solvent-LHFZ method readily grows single crystal SiC (retains polytype and orientation), but has a significant amount of inhomogeneous strain and solvent rich inclusions

Lateral Growth Expansion of 4H/6H-SiC m-plane Pseudo Fiber Crystals by Hot Wall CVD Epitaxy

Lateral expansion of small mixed polytype 4H/6H-SiC slivers were realized by hot wall chemical vapor deposition (HWCVD). Small slivers cut from m-oriented ..11..00.. SiC boule slices containing regions of 4H and 6H SiC were exposed to HWCVD conditions using standard silane/propane chemistry for a period of up to eight hours. The slivers exhibited approximately 1500 microns (1.5 mm) of total lateral expansion. Initial analysis by synchrotron white beam x-ray topography (SWBXT) confirms, that the lateral growth was homoepitaxial, matching the polytype of the respective underlying region of the seed sliver

Characterization of 4H <000-1> Silicon Carbide Films Grown by Solvent-Laser Heated Floating Zone

Commercially available bulk silicon carbide (SiC) has a high number (>2000/sq cm) of screw dislocations (SD) that have been linked to degradation of high-field power device electrical performance properties. Researchers at the NASA Glenn Research Center have proposed a method to mass-produce significantly higher quality bulk SiC. In order for this bulk growth method to become reality, growth of long single crystal SiC fibers must first be achieved. Therefore, a new growth method, Solvent-Laser Heated Floating Zone (Solvent-LHFZ), has been implemented. While some of the initial Solvent-LHFZ results have recently been reported, this paper focuses on further characterization of grown crystals and their growth fronts. To this end, secondary ion mass spectroscopy (SIMS) depth profiles, cross section analysis by focused ion beam (FIB) milling and mechanical polishing, and orientation and structural characterization by x-ray transmission Laue diffraction patterns and x-ray topography were used. Results paint a picture of a chaotic growth front, with Fe incorporation dependant on C concentration

Creating a Multifunctional Composite Stator Slot Material System to Enable High Power Density Electric Machines for Electrified Aircraft Applications

Increasing the power density and efficiency of electric machines (motors and generators) is integral to bringing Electrified Aircraft (EA) to commercial realization. However, power density and efficiency are not qualities that can be developed independently. At the heart of any electric machine are the conductors (usually copper) that carry current and generate magnetic fields. Increased power density means increased current density and increased joule heating in a smaller volume. To increase efficiency at the wire level means minimizing electrical resistance and hence power lost to joule heating. There are fundamental challenges with concomitantly increasing both power density and efficiency since the copper resistivity is very temperature sensitive at common electric machine operating conditions. Simple calculations of the linear increase in resistivity of copper as a function of temperature, reveals that a one degree Celsius increase in temperature results in a 0.39% decrease in efficiency. Conversely, a 20 degree Celsius decrease in copper temperature produces a 7.8% increase in efficiency. Therefore, improved thermal management concepts for electric machine building blocks such as stator winding are a priority for improving efficiency and power density. This paper proposing changing the view of component materials in the stator slots from individual components with singular functionality to a composite system where the components take on a multifunctional roles. In the composite framework, achievable material development goals are defined that together have maximum system impact on the thermal environment inside of high power density electric machines for aerospace applications

Thermal Analysis of Potted Litz Wire for High-Power-Density Aerospace Electric Machines

Increasing the power density and efficiency of electric machines (motors and generators) is integral to bringing Electrified Aircraft (EA) to commercial realization. To that end an effort to create a High Efficiency Megawatt Motor (HEMM) with a goal of exceeding 98% efficiency and 1.46 MW of power has been undertaken at the NASA Glenn Research Center. Of the motor components the resistive losses in the stator windings are by far the largest contributor (34%) to total motor loss. The challenge is the linear relationship between resistivity and temperature, making machine operation sensitive to temperature increases. In order to accurately predict the thermal behavior of the stator the thermal conductivity of the Litz wire-potting-electrical insulation system must be known. Unfortunately, this multi material system has a wide range of thermal conductivities (0.1 W/m-K 400 W/m-K) and a high anisotropy (axial vs transverse) making the prediction of the transverse thermal conductivity an in turn the hot spot temperatures in the windings is difficult. In order to do this a device that simulates the thermal environment found in the HEMM stator was designed. This device is not unlike the motorettes (little motors) that are described in IEEE standards for testing electrical insulation lifetimes or other electric motor testing. However, because the HEMM motor design includes significant rotor electrical and thermal considerations the term motorette was not deemed appropriate. Instead statorette (or little stator) was adopted as the term for this test device. This paper discussed the design, thermal heat conjugate analysis (thermal model), manufacturing and testing of HEMM's statorette. Analysis of the results is done by thermal resistance network model and micro thermal model and is compared to analytical predictions of thermal conductivity of the insulated and potted Litz wire system

Solar Electric Propulsion Technology Development for Electric Propulsion

NASA is developing technologies to prepare for human exploration missions to Mars. Solar electric propulsion (SEP) systems are expected to enable a new cost effective means to deliver cargo to the Mars surface. Nearer term missions to Mars moons or near-Earth asteroids can be used to both develop and demonstrate the needed technology for these future Mars missions while demonstrating new capabilities in their own right. This presentation discusses recent technology development accomplishments for high power, high voltage solar arrays and power management that enable a new class of SEP missions

Evaluation of Human Papilloma Virus Diagnostic Testing in Oropharyngeal Squamous Cell Carcinoma: Sensitivity, Specificity, and Prognostic Discrimination

Abstract Purpose: Human papillomavirus-16 (HPV16) is the causative agent in a biologically distinct subset of oropharyngeal squamous cell carcinoma (OPSCC) with highly favorable prognosis. In clinical trials, HPV16 status is an essential inclusion or stratification parameter, highlighting the importance of accurate testing. Experimental Design: Fixed and fresh-frozen tissue from 108 OPSCC cases were subject to eight possible assay/assay combinations: p16 immunohistochemistry (p16 IHC); in situ hybridization for high-risk HPV (HR HPV ISH); quantitative PCR (qPCR) for both viral E6 RNA (RNA qPCR) and DNA (DNA qPCR); and combinations of the above. Results: HPV16-positive OPSCC presented in younger patients (mean 7.5 years younger, P = 0.003) who smoked less than HPV-negative patients (P = 0.007). The proportion of HPV16-positive cases increased from 15% to 57% (P = 0.001) between 1988 and 2009. A combination of p16 IHC/DNA qPCR showed acceptable sensitivity (97%) and specificity (94%) compared with the RNA qPCR “gold standard”, as well as being the best discriminator of favorable outcome (overall survival P = 0.002). p16 IHC/HR HPV ISH also had acceptable specificity (90%) but the substantial reduction in its sensitivity (88%) impacted upon its prognostic value (P = 0.02). p16 IHC, HR HPV ISH, or DNA qPCR was not sufficiently specific to recommend in clinical trials when used in isolation. Conclusions: Caution must be exercised in applying HPV16 diagnostic tests because of significant disparities in accuracy and prognostic value in previously published techniques. Clin Cancer Res; 17(19); 6262–71. ©2011 AACR.</jats:p

Altimetry for the future: Building on 25 years of progress

In 2018 we celebrated 25 years of development of radar altimetry, and the progress achieved by this methodology in the fields of global and coastal oceanography, hydrology, geodesy and cryospheric sciences. Many symbolic major events have celebrated these developments, e.g., in Venice, Italy, the 15th (2006) and 20th (2012) years of progress and more recently, in 2018, in Ponta Delgada, Portugal, 25 Years of Progress in Radar Altimetry. On this latter occasion it was decided to collect contributions of scientists, engineers and managers involved in the worldwide altimetry community to depict the state of altimetry and propose recommendations for the altimetry of the future. This paper summarizes contributions and recommendations that were collected and provides guidance for future mission design, research activities, and sustainable operational radar altimetry data exploitation. Recommendations provided are fundamental for optimizing further scientific and operational advances of oceanographic observations by altimetry, including requirements for spatial and temporal resolution of altimetric measurements, their accuracy and continuity. There are also new challenges and new openings mentioned in the paper that are particularly crucial for observations at higher latitudes, for coastal oceanography, for cryospheric studies and for hydrology. The paper starts with a general introduction followed by a section on Earth System Science including Ocean Dynamics, Sea Level, the Coastal Ocean, Hydrology, the Cryosphere and Polar Oceans and the ‘‘Green” Ocean, extending the frontier from biogeochemistry to marine ecology. Applications are described in a subsequent section, which covers Operational Oceanography, Weather, Hurricane Wave and Wind Forecasting, Climate projection. Instruments’ development and satellite missions’ evolutions are described in a fourth section. A fifth section covers the key observations that altimeters provide and their potential complements, from other Earth observation measurements to in situ data. Section 6 identifies the data and methods and provides some accuracy and resolution requirements for the wet tropospheric correction, the orbit and other geodetic requirements, the Mean Sea Surface, Geoid and Mean Dynamic Topography, Calibration and Validation, data accuracy, data access and handling (including the DUACS system). Section 7 brings a transversal view on scales, integration, artificial intelligence, and capacity building (education and training). Section 8 reviews the programmatic issues followed by a conclusion