A high-speed spectrograph shutter

Device can operate in close-open-close mode. Beam splitter placed behind static-slit assembly allows use of more than one camera. Each frame in particular series may be conveniently varied in exposure time and spacing. This can be done independent of other frames in the series. In ''open'' position, shutter transmits light over wide wavelength range

Experimental investigation of leading-edge thrust at supersonic speeds

Wings, designed for leading edge thrust at supersonic speeds, were investigated in the Unitary Plan Wind Tunnel at Mach numbers of 1.60, 1.80, 2.00, 2.16, and 2.36. Experimental data were obtained on a uncambered wing which had three interchangeable leading edges that varied from sharp to blunt. The leading edge thrust concept was evaluated. Results from the investigation showed that leading edge flow separation characteristics of all wings tested agree well with theoretical predictions. The experimental data showed that significant changes in wing leading edge bluntness did not affect the zero lift drag of the uncambered wings

A high speed spectrograph shutter

High speed spectrograph shutte

Applying inspection to object-oriented software

The benefits of the object-oriented paradigmare widely cited. At the same time, inspection is deemed to be the most cost-effective means of detecting defects in software products. Why then, is there no published experience, let alone quantitative data, on the application of inspection to object-oriented systems? We describe the facilities of the object-oriented paradigm and the issues that these raise when inspecting object-oriented code. Several problems are caused by the disparity between the static code structure and its dynamic runtime behaviour. The large number of small methods in object-oriented systems can also cause problems. We then go on to describe three areas which may help mitigate problems found. Firstly, the use of various programming methods may assist in making object-oriented code easier to inspect. Secondly, improved program documentation can help the inspector understand the code which is under inspection. Finally, tool support can help the inspector to analyse the dynamic behaviour of the code. We conclude that while both the object-oriented paradigm and inspection provide excellent benefits on their own, combining the two may be a difficult exercise, requiring extensive support if it is to be successful

An empirical study evaluating depth of inheritance on the maintainability of object-oriented software

This empirical research was undertaken as part of a multi-method programme of research to investigate unsupported claims made of object-oriented technology. A series of subject-based laboratory experiments, including an internal replication, tested the effect of inheritance depth on the maintainability of object-oriented software. Subjects were timed performing identical maintenance tasks on object-oriented software with a hierarchy of three levels of inheritance depth and equivalent object-based software with no inheritance. This was then replicated with more experienced subjects. In a second experiment of similar design, subjects were timed performing identical maintenance tasks on object-oriented software with a hierarchy of five levels of inheritance depth and the equivalent object-based software. The collected data showed that subjects maintaining object-oriented software with three levels of inheritance depth performed the maintenance tasks significantly quicker than those maintaining equivalent object-based software with no inheritance. In contrast, subjects maintaining the object-oriented software with five levels of inheritance depth took longer, on average, than the subjects maintaining the equivalent object-based software (although statistical significance was not obtained). Subjects' source code solutions and debriefing questionnaires provided some evidence suggesting subjects began to experience diffculties with the deeper inheritance hierarchy. It is not at all obvious that object-oriented software is going to be more maintainable in the long run. These findings are sufficiently important that attempts to verify the results should be made by independent researchers

An overview of the fundamental aerodynamics branch's research activities in wing leading-edge vortex flows at supersonic speeds

For the past 3 years, a research program pertaining to the study of wing leading edge vortices at supersonic speeds has been conducted in the Fundamental Aerodynamics Branch of the High-Speed Aerodynamics Division at the Langley Research Center. The purpose of the research is to provide an understanding of the factors governing the formation and the control of wing leading-edge vortices and to evaluate the use of these vortices for improving supersonic aerodynamic performance. The studies include both experimental and theoretical investigations and focus primarily on planform, thickness and camber effects for delta wings. An overview of this research activity is presented

Theoretical and experimental investigation of supersonic aerodynamic characteristics of a twin-fuselage concept

A theoretical and experimental investigation has been conducted to evaluate the fundamental supersonic aerodynamic characteristics of a generic twin-body model at a Mach number of 2.70. Results show that existing aerodynamic prediction methods are adequate for making preliminary aerodynamic estimates

Diagnostic criteria for grading the severity of acute motion sickness

Diagnostic criteria for grading severity of acute motion sicknes

Closed-Cycle, Frequency-Stable CO2 Laser Technology

These proceedings contain a collection of papers and comments presented at a workshop on technology associated with long-duration closed-cycle operation of frequency-stable, pulsed carbon dioxide lasers. This workshop was held at the NASA Langley Research Center June 10 to 12, 1986. The workshop, jointly sponsored by the National Aeronautics and Space Administration (NASA) and the Royal Signals and Radar Establishment (RSRE), was attended by 63 engineers and scientists from the United States and the United Kingdom. During the 2 1/2 days of the workshop, a number of issues relating to obtaining frequency-stable operation and to the catalytic control of laser gas chemistry were discussed, and specific recommendations concerning future activities were drafted

National park research fellowships increase capacity and creativity in responding to climate change

The challenges posed by climate change in national parks and other protected areas demand creative approaches, new ideas, and experiments that are beyond the capacity of any single park or agency staff. Research fellowships provide a critical way that the National Park Service (NPS) and its partners can address the agency’s needs to address climate change adaptation challenges. At least 30 such programs support stewardship-relevant science in national parks. Some national programs and initiatives at Acadia National Park in Maine, Rocky Mountain National Park in Colorado, and Sequoia and Kings Canyon National Parks in California serve as examples of how researchers in these programs are informing restoration, relocation, vegetation and fire management, and resource protection activities; documenting change that has already occurred; providing baseline data on biodiversity; and conducting novel experiments. Successful fellowship programs have strong engagement of resource managers, emphasize communication with management and public audiences, and incorporate ongoing support and evaluation. As a result of these successes, NPS and partners are working to expand and strengthen the sustainability and effectiveness of research grants and fellowships