Critical Masses of Oralloy Cylinders With Multiple Reflectors of Medium Z Elements

Critical mass is influenced mainly by the density, concentration, and shape of the fissionable material, the degree of neutron moderation, and the type and thickness of reflector material. Most of these parameters have been explored in detail at the Pajarito Remote-Control Laboratory (1) and the present series of measurements has the purpose of investigating reflector materials in the middle of the periodic table for the more subtle influence of their resonance scattering structure

The clubhead and hand planes in golf draw and fade shots.

Swing planes in golf have become a popular area of research. Cochran and Stobbs (1968) examined the motion of the clubhead and hands qualitatively. Subsequent quantitative analyses have included investigations of the planarity of the whole club (Coleman & Anderson, 2007) and clubhead (Shin, Casebolt, Lambert, Kim, & Kwon, 2008). The aim of this study was to investigate the motion of the clubhead and hands in the downswing quantitatively, and to compare these motions for the fade and draw (as suggested by Coleman and Anderson, 2007). In conclusion, both the clubhead and hand planes in the late downswing were found to differ significantly in relation to the target line between the draw and fade shots. Greater differences were found between golfers, rather than between shots, in the relationship between the clubhead and hand motion during the downswing. Nevertheless, further detailed analysis is warranted of how the motions around impact – especially the clubface orientation – differ between the two types of shot

The clubhead swing plane in golf draw and fade shots

It has become popular to characterise a golf shot in terms of a ‘swing plane’. However Coleman and Anderson (2007) showed that the motion of the whole club in the downswing could not be represented by a single plane in all players. Shin et al. (2008) found that the clubhead motion was consistently planar between the club being horizontal in the downswing and follow-through. Coleman and Anderson (2007) also suggested that the club plane might differ between draw and fade shots. The purpose of this study was to compare draw and fade shots, with a focus on the clubhead motion in the late downswing. The late downswing clubhead plane differs between a draw and a fade shot, even when differences in address angles are accounted for

Increasing Microcystis cell density enhances microcystin synthesis: a mesocosm study

An experimental protocol using mesocosms was established to study the effect of Microcystis sp. cell abundance on microcystin production. The mesocosms (55 L) were set up in a shallow eutrophic lake and received either no (control), low (to simulate a moderate surface accumulation), or high (to simulate a dense surface scum) concentrations of Microcystis sp. cells collected from the lake water adjacent to the mesocosms. In the low- and high-cell addition mesocosms (2 replicates of each), the initial addition of Microcystis sp. cells doubled the starting cell abundance from 500 000 to 1 000 000 cells mL⁻¹, but there was no detectable effect on microcystin quotas. Two further cell additions were made to the high-cell addition mesocosms after 60 and 120 min, increasing densities to 2 900 000 and 7 000 000 cells mL-1, respectively. Both additions resulted in marked increases in microcystin quotas from 0.1 pg cell-1 to 0.60 and 1.38 pg cell⁻¹, respectively, over the 240 min period. Extracellular microcystins accounted for <12% of the total microcystin load throughout the whole experiment. The results of this study indicate a relationship between Microcystis cell abundance and/or mutually correlated environmental parameters and microcystin synthesis

Hindcasting cyanobacterial communities in Lake Okaro with germination experiments and genetic analyses

Cyanobacterial blooms are becoming increasingly prevalent worldwide. Sparse historic phytoplankton records often result in uncertainty as to whether bloom-forming species have always been present and are proliferating in response to eutrophication or climate change, or if there has been a succession of new arrivals through recent history. This study evaluated the relative efficacies of germination experiments and automated rRNA intergenic spacer analysis (ARISA) assays in identifying cyanobacteria in a sediment core and thus reconstructing the historical composition of cyanobacterial communities. A core (360 mm in depth) was taken in the central, undisturbed basin of Lake Okaro, New Zealand, a lake with a rapid advance of eutrophication and increasing cyanobacteria populations. The core incorporated a tephra from an 1886 volcanic eruption that served to delineate recent sediment deposition. ARISA and germination experiments successfully detected akinete-forming nostocaleans in sediment dating 120 bp and showed little change in Nostocales species structure over this time scale. Species that had not previously been documented in the lake were identified including Aphanizomenon issatschenkoi, a potent anatoxin-a producer. The historic composition of Chrococcales and Oscillatoriales was more difficult to reconstruct, potentially due to the relatively rapid degradation of vegetative cells within sediment

Proximity Drawings of High-Degree Trees

A drawing of a given (abstract) tree that is a minimum spanning tree of the vertex set is considered aesthetically pleasing. However, such a drawing can only exist if the tree has maximum degree at most 6. What can be said for trees of higher degree? We approach this question by supposing that a partition or covering of the tree by subtrees of bounded degree is given. Then we show that if the partition or covering satisfies some natural properties, then there is a drawing of the entire tree such that each of the given subtrees is drawn as a minimum spanning tree of its vertex set

Postirradiation behavior of p-channel charge-coupled devices irradiated at 153 K

The displacement damage hardness that can be achieved using p-channel charge-coupled devices (CCD) was originally demonstrated in 1997, and since then a number of other studies have demonstrated an improved tolerance to radiation-induced CTI when compared to n-channel CCDs. A number of recent studies have also shown that the temperature history of the device after the irradiation impacts the performance of the detector, linked to the mobility of defects at different temperatures. This study describes the initial results from an e2v technologies p-channel CCD204 irradiated at 153 K with a 10 MeV equivalent proton fluences of 1.24×109 and 1.24×1011 protons cm-2. The dark current, cosmetic quality and the number of defects identified using trap pumping immediately were monitored after the irradiation for a period of 150 hours with the device held at 153 K and then after different periods of time at room temperature. The device also exhibited a flatband voltage shift of around 30 mV / krad, determined by the reduction in full well capacity

A bonding and damage constitutive model for lightly cemented granular material

The behaviour of cemented granular material is complicated by the fact that the eventual cemented properties depend on the conditions under which cement hydration (curing) takes place. There are a number of situations in industry where granular materials are mixed with small quantities of cement and deployed in highly transient curing environments. Understanding and predicting the responses in these situations requires a constitutive model where cemented properties are an output, rather than a pre-determined input. This paper presents a constitutive model that is capable of representing the formation and destruction of bonding in weakly cemented granular material in a transient stress environment.</p

New Zealand Guidelines for cyanobacteria in recreational fresh waters: Interim Guidelines

This document is divided into four main sections, plus 14 appendices. Section 1. Introduction provides an overview of the purpose and status of the document as well as advice on who should use it. Section 2. Framework provides a background to the overall guidelines approach, recommendations on agency roles and responsibilities, and information on the condition of use of this document. Section 3. Guidelines describes the recommended three-tier monitoring and action sequence for planktonic and benthic cyanobacteria. Section 4. Sampling provides advice on sampling planktonic and benthic cyanobacteria. The appendices give further background information and include templates for data collection and reporting, including: • background information on known cyanotoxins and their distribution in New Zealand • information on the derivation of guideline values • photographs of typical bloom events • a list of biovolumes for common New Zealand cyanobacteria • templates for field assessments • suggested media releases and warning sign templates. A glossary provides definitions for abbreviations and terms used in these guidelines