Location of pedicle screw hold in relation to bone quality and loads

Introduction: Sufficient screw hold is an indispensable requirement for successful spinal fusion, but pedicle screw loosening is a highly prevalent burden. The aim of this study was to quantify the contribution of the pedicle and corpus region in relation to bone quality and loading amplitude of pedicle screws with traditional trajectories. Methods: After CT examination to classify bone quality, 14 pedicle screws were inserted into seven L5. Subsequently, Micro-CT images were acquired to analyze the screw's location and the vertebrae were split in the midsagittal plane and horizontally along the screw's axis to allow imprint tests with 6 mm long sections of the pedicle screws in a caudal direction perpendicular to the screw's surface. Force-displacement curves in combination with the micro-CT data were used to reconstruct the resistance of the pedicle and corpus region at different loading amplitudes. Results: Bone quality was classified as normal in three specimens, as moderate in two and as bad in two specimens, resulting in six, four, and four pedicle screws per group. The screw length in the pedicle region in relation to the inserted screw length was measured at an average of 63%, 62%, and 52% for the three groups, respectively. At a calculated 100 N axial load acting on the whole pedicle screw, the pedicle region contributed an average of 55%, 58%, and 58% resistance for the normal, moderate, and bad bone quality specimens, respectively. With 500 N load, these values were measured at 59%, 63%, and 73% and with 1000 N load, they were quantified at 71%, 75%, and 81%. Conclusion: At lower loading amplitudes, the contribution of the pedicle and corpus region on pedicle screw hold are largely balanced and independent of bone quality. With increasing loading amplitudes, the contribution of the pedicle region increases disproportionally, and this increase is even more pronounced in situations with reduced bone quality. These results demonstrate the importance of the pedicle region for screw hold, especially for reduced bone quality

Spine Biomechanics in the Work of Aristotle (384 - 322 BC)

Background: Spine biomechanics is a field of applied research aiming to unravel the biomechanical understanding of the spine and its disorders and to understand the implications of their interventional therapy to improve clinical practice, physical performance and daily living. Its scientific whereabouts can be traced in the work of Aristotle, who discussed physical and biological concepts of spine biomechanics in a series of treatises.Results: The authors searched the Thesaurus Linguae Graecae archive for original texts written in Greek and attributed to Aristotle and selected excerpts of medical and biological treatises that elaborate on spine biomechanics.Discussion: While many of his theories have become outdated, his methodology and rationale remain relevant for contemporary researchers and clinicians. Here, the relevant content of passages of the corpus aristotelicum related to spine biomechanics and discuss their practical implications are presented. Keywords: aristotle; humanities; philosophy; spine biomechanic

Real-time assessment of anteroposterior stability of spinal segments

PURPOSE While anteroposterior instability of spinal segments is regarded as an important biomechanical aspect in the clinical evaluation of lumbar pathologies, the reliability of the available diagnostic tools is limited and an intraoperative method to quantify stability is lacking. The aim of this study was to develop and validate an instrument to measure the anteroposterior stability of a spinal segments in real-time. METHODS Torsi of five fresh-frozen human cadavers were used for this study. After pedicle screw insertion, a specifically modified reposition tool composed with load and linear sensors was used to measure the segmental anteroposterior motion caused by 100 N anterior and posterior force during 5 loading cycles on either side of the instrumentation by two different operators. The spinal segments were then resected from the torsi and anteroposterior loading with ± 100 N was repeated in an advanced biomechanical spine testing setup as a reference measurement. The Inter-correlation coefficient (ICC) was used for validation of the "intraoperative" device. RESULTS Inter-operator repeatability of the measurements showed an ICC of 0.93 (p < 0.0001) and the bilateral (left-right) comparison had an ICC of 0.73 (p < 0.0001). The ICC resulting from the comparison to the reference measurement was 0.82 (p < 0.0001) without offset correction, and 0.9 (p < 0.0001) with offset correction. The ICC converged at this value already after two of the five performed loading cycles. CONCLUSION An accurate and reliable measurement tool is developed and validated for real-time quantification of anteroposterior stability of spinal segments and serves as a basis for future intraoperative use

Kinematics of the Cervical Spine Under Healthy and Degenerative Conditions: A Systematic Review

Knowledge of spinal kinematics is essential for the diagnosis and management of spinal diseases. Distinguishing between physiological and pathological motion patterns can help diagnose these diseases, plan surgical interventions and improve relevant tools and software. During the last decades, numerous studies based on diverse methodologies attempted to elucidate spinal mobility in different planes of motion. The authors aimed to summarize and compare the evidence about cervical spine kinematics under healthy and degenerative conditions. This includes an illustrated description of the spectrum of physiological cervical spine kinematics, followed by a comparable presentation of kinematics of the degenerative cervical spine. Data was obtained through a systematic MEDLINE search including studies on angular/translational segmental motion contribution, range of motion, coupling and center of rotation. As far as the degenerative conditions are concerned, kinematic data regarding disc degeneration and spondylolisthesis were available. Although the majority of the studies identified repeating motion patterns for most motion planes, discrepancies associated with limited sample sizes and different imaging techniques and/or spine configurations, were noted. Among healthy/asymptomatic individuals, flexion extension (FE) and lateral bending (LB) are mainly facilitated by the subaxial cervical spine. C4-C5 and C5-C6 were the major FE contributors in the reported studies, exceeding the motion contribution of sub-adjacent segments. Axial rotation (AR) greatly depends on C1-C2. FE range of motion (ROM) is distributed between the atlantoaxial and subaxial segments, while AR ROM stems mainly from the former and LB ROM from the latter. In coupled motion rotation is quantitatively predominant over translation. Motion migrates caudally from C1-C2 and the center of rotation (COR) translocates anteriorly and superiorly for each successive subaxial segment. In degenerative settings, concurrent or subsequent lesions render the association between diseases and mobility alterations challenging. The affected segments seem to maintain translational and angular motion in early and moderate degeneration. However, the progression of degeneration restrains mobility, which seems to be maintained or compensated by adjacent non-affected segments. While the kinematics of the healthy cervical spine have been addressed by multiple studies, the entire nosological and kinematic spectrum of cervical spine degeneration is partially addressed. Large-scale in vivo studies can complement the existing evidence, cover the gaps and pave the way to technological and clinical breakthroughs

Lumbar vertebropexy after unilateral total facetectomy

BACKGROUND CONTEXT Posterior decompression with spinal instrumentation and fusion is associated with well-known complications. Alternatives that include decompression and restoration of native stability of the motion segment without fusion continue to be explored, however, an ideal solution has yet to be identified. PURPOSE The aim of this study was to test two different synthetic lumbar vertebral stabilization techniques that can be used after unilateral total facetectomy. STUDY DESIGN Biomechanical cadaveric study. METHODS Twelve spinal segments were biomechanically tested after unilateral total facetectomy and stabilized with a FiberTape cerclage. The cerclage was pulled through the superior and inferior spinous process (interspinous technique) or through the spinous process and around both laminae (spinolaminar technique). The specimens were tested after (1) unilateral total facetectomy, (2) interspinous vertebropexy and (3) spinolaminar vertebropexy. The segments were loaded in flexion-extension (FE), lateral shear (LS), lateral bending (LB), anterior shear (AS) and axial rotation (AR). RESULTS Unilateral facetectomy increased native ROM in FE by 10.6% (7.6%-12.6%), in LS by 25.8% (18.7%-28.4%), in LB 7.5% (4.6%-12.7%), in AS 39.4% (22.6%-49.2%), and in AR by 27.2% (15.8%-38.6%). Interspinous vertebropexy significantly reduced ROM after unilateral facetectomy: in FE by 73% (p=.001), in LS by 23% (p=.001), in LB by 13% (p=.003), in AS by 16% (p=.007), and in AR by 20% (p=.001). In FE and LS the ROM was lower than in the baseline/native condition. In AS and AR, the baseline ROM was not reached by 17% and 1%, respectively. Spinolaminar vertebropexy significantly reduced ROM after unilateral facetectomy: in FE by 74% (p=.001), in LS by 24% (p=.001), in LB by 13% (p=.003), in AS by 28% (p=.004), and in AR by 15 % (p=.001). Baseline ROM was not reached by 9% in AR. CONCLUSION Interspinous vertebropexy seems to sufficiently counteract destabilization after unilateral total facetectomy, and limits range of motion in flexion and extension while avoiding full segmental immobilization. Spinolaminar vertebropexy additionally restores native anteroposterior stability, allowing satisfactory control of shear forces after facetectomy. CLINICAL SIGNIFICANCE Lumbar vertebropexy seems promising to counteract the destabilizating effect of facetectomy by targeted stabilization

The biomechanical consequence of posterior interventions at the thoracolumbar spine on the passively stabilized flexed posture

In the flexed end-of-range position (e.g., during slumped sitting), the trunk is passively stabilized. Little is known about the biomechanical consequence of posterior approaches on passive stabilization. The aim of this study is to investigate the effect of posterior surgical interventions on local and distant spinal regions. While being fixed at the pelvis, five human torsos were passively flexed. The change in spinal angulation at Th4, Th12, L4 and S1 was measured after level-wise longitudinal incisions of the thoracolumbar fascia, the paraspinal muscles, horizontal incisions of the inter- & supraspinous ligaments (ISL/SSL) and horizontal incision of the thoracolumbar fascia and the paraspinal muscles. Lumbar angulation (Th12-S1) was increased by 0.3° for fascia, 0.5° for muscle and 0.8° for ISL/SSL-incisions per lumbar level. The effect of level-wise incisions at the lumbar spine was 1.4, 3.5 and 2.6 times greater compared to thoracic interventions for fascia, muscle and ISL/SSL respectively. The combined midline interventions at the lumbar spine were associated with 2.2° extension of the thoracic spine. Horizontal incision of the fascia increased spinal angulation by 0.3°, while horizontal muscle incision resulted in a collapse of 4/5 specimens. The thoracolumbar fascia, the paraspinal muscle and the ISL/SSL are important passive stabilizers for the trunk in the flexed end-of-range position. Lumbar interventions needed for approaches to the spine have a larger effect on spinal posture than thoracic interventions and the increase of spinal angulation at the level of the intervention is partially compensated at the neighboring spinal regions

Biomechanical considerations of the posterior surgical approach to the lumbar spine

BACKGROUND CONTEXT The effect of the posterior midline approach to the lumbar spine, relevance of inter- and supraspinous ligament (ISL&SSL) sparing, and potential of different wound closure techniques are largely unknown despite their common use. PURPOSE The aim of this study was to quantify the effect of the posterior approach, ISL&SSL resection, and different suture techniques. STUDY DESIGN Biomechanical cadaveric study. METHODS Five fresh frozen human torsi were stabilized at the pelvis in the erect position. The torsi were passively loaded into the forward bending position and the sagittal angulation of the sacrum, L4 and T12 were measured after a level-wise posterior surgical approach from L5/S1 to T12/L1 and after a level-wise ISL&SSL dissection of the same sequence. The measurements were repeated after the surgical closure of the thoracolumbar fascia with and without suturing the fascia to the spinous processes. RESULTS Passive spinal flexion was increased by 0.8±0.3° with every spinal level accessed by the posterior approach. With each additional ISL&SSL resection, a total increase of 1.6±0.4° was recorded. Suturing of the thoracolumbar fascia reduced this loss of resistance against lumbar flexion by 70%. If the ISL&SSL were resected, fascial closure reduced the lumbar flexion by 40% only. In both settings, suturing the fascia to the spinous processes did not result in a significantly different result (p=.523 and p=.730 respectively). CONCLUSION Each level accessed by a posterior midline approach is directly related to a loss of resistance against passive spinal flexion. Additional resection of ISL&SSL multiplies it by a factor of two. CLINICAL SIGNIFICANCE The surgical closure of the thoracolumbar fascia can reduce the above mentioned loss of resistance partially. Suturing the fascia to the spinal processes does not result in improved passive stability