Development of Fast, Quantitative, Selective and Bioavailability-Predictive Extraction Procedures for Determination of Halogenated POPs in Environmental Matrices

This thesis concerns the analysis of anthropogenic substances of the compound class known as persistent organic pollutants (POPs). Sample preparation perspectives for the analysis of POPs in the environmental matrices water, soils and sediments are presented. This thesis features reasonably cheap and uncomplicated methodology capable of fast screening of POPs. It displays how quantitative extraction of POPs can be made in a sustainable manner and how selectivity can be increased generating faster and less solvent consuming procedures compared to common practice. Also demonstrated is the potential of how selective SFE can be used in bioavailability-predictive extractions. This fast and uncomplicated methodology is capable of generating information enhancing the quality and credibility of risk assessment procedures at contaminated sites. Furthermore, the possibility of environmental analytical chemistry of POPs becoming green chemistry is been highlighted throughout the text

Evaluation of PLE exhaustiveness for the extraction of PCBs from sediments and the influence of sediment characteristics

Pressurized liquid extractions were performed on eight sediments in order to investigate if a modified US EPA method (100 degrees C, 100 bar, n-heptane/acetone (1:1), 2 x 5 min) provided exhaustive extractions of polychlorinated biphenyls (PCBs) from sediment, and to study if the extractability of PCBs from the different sediments was affected by characteristics of the sediment. The recovery from the eight native sediments, contaminated in nature, was between 96.4% and 98.9%, as an average of the recoveries from 10 PCB congeners. Hundred percent recovery was defined as the sum of two consecutive extractions (2 x 5 min each) at the stated conditions. The recoveries of the individual congeners were above 94%, except for one congener in one sediment, which had a recovery of 92%. When the recoveries and different characteristics of the sediments were compared, no correlation appeared between recoveries and sediment PCB concentration, total organic carbon (TOC), soot carbon (SC) or amorphous carbon (AC). The fact that carbon did not influence the extractions was somewhat surprising, since previous experiments have indicated a connection. Instead, statistically significant (p < 0.05) correlations were observed for water content and carbon/nitrogen (C/N) ratio. The decrease in recoveries with decreased water content was attributed to less access of the solvent to the analytes due to less matrix swelling. The lowered recoveries with increased C/N ratio can indicate that a difference in structure of the organic matter exists, which influences the binding strength between the analytes and the matrix. The difference in structure can possibly be explained by different origin of the organic matter or by aging effects. Overall the method was found to be exhaustive and the excellent recoveries show that sediment characteristics do not influence the extractions markedly

Determining PCB desorption behaviour on sediments with SFE and investigating the dependency of selective fractions on sediment characteristics

A method for studying PCB desorption behaviour from sediments using supercritical fluid extraction (SFE) and pressurized liquid extraction (PLE) is presented. Four sediments were investigated and extracted with supercritical carbon dioxide employing increasingly harsher extraction conditions ranging from 40 degrees C and 12MPa to 100 degrees C and 36.5 MPa. To ensure quantitative extractions, the remaining SFE residues were also extracted with PLE. Resulting profiles identified at least three different PCB fractions within the four sediments. Furthermore, a distinct fraction was obtained with extraction for 2 h at 40 degrees C and 36.5 MPa. This fraction has previously been found to correlate well with bioavailable fractions. The dependency of this fraction on sediment total organic carbon (TOC) was investigated, both for sediments examined in this study as well as for previously reported values using the same extraction conditions. It was found that TOC does not correlate to selective SFE, which indicates that the use of TOC to predict bioavailability is questionable

Development of a combined solid-phase extraction-supercritical fluid extraction procedure for the determination of polychlorinated biphenyls in wastewater

A combined solid-phase extraction (SPE)-supercritical fluid extraction (SFE) procedure was developed for the analysis of polychlorinated biphenyls (PCBs) in wastewater. The importance of cleaning and drying the filters and SPE-disks prior to eluting PCBs with SFE was studied, leading to improved recoveries for all congeners investigated. The average PCB recovery of the final procedure, at a concentration of 18 ng/L in reagent water, was 101% with relative standard deviations ranging from 1 to 5% for the different congeners. Spiked leachate to a final concentration of 4 ng/L was extracted directly after spiking, or after 24 h of spiking. An average recovery of 112% was obtained in the direct extraction of spiked leachate

Measuring bioavailability of polychlorinated biphenyls in soil to earthworms using selective supercritical fluid extraction

If the release mechanisms during selective chemical extraction of persistent organic pollutants (POP) mimic release mechanisms in natural systems during biological uptake, then a selective non-exhaustive extraction could give a quantitative measure of the bioavailable POP fraction. Supercritical fluid extraction (SFE) is suggested as a possible technique to estimate the amount of bioavailable polychlorinated biphenyls (PCBs) at contaminated sites and hence serve as a new tool in risk assessment. The uptake of PCBs by earthworm (Eisenia foetida) was investigated. PCB contaminated soil was pre-extracted with selective non-exhaustive SFE (50 degrees C, 350 bar, 1 h), which removed on average 70% of the individual PCBs. Earthworms were placed in this pre-extracted soil, as well as in untreated soil. After 10 days, the PCB uptake by earthworms in the two systems was compared. The bioaccumulation factor(BAF) was 83% lower in the pre-extracted system than in the untreated system, demonstrating that SFE extracts primarily bioavailable contaminants. From the data, the bioavailable fraction could also be calculated to be 75%, which is very close to the 70% removed by SFE under the applied conditions. This suggests that the chemical methodology is capable of measuring the bioavailable fraction very accurately in this system. (c) 2005 Elsevier Ltd. All rights reserved

Selective pressurized liquid extraction for multi-residue analysis of organochlorine pesticides in soil

A selective pressurized liquid extraction (SPLE) procedure capable of performing simultaneous extraction and clean-up has been demonstrated for multi-residue analysis of organochlorine pesticides (OCPs) in soil. The final method was performed at 100 degrees C for 3 x 10 min using acetone/n-heptane (1:1, v/v). Florisil was placed inside the extraction cell downstream the sample to remove interfering compounds. Extraction of two soil samples by SPLE gave a recovery which was over 80% for beta-endosulfan, endosulfan sulfate, p,p'-DDT and p,p'-DDE compared to PLE with off-line clean-up. The same trend was observed when applying the SPLE method to a certified reference soil sample (CRM 811-050) containing 13 OCPs, where the SPLE method gave 80-90% recovery vis-a-vis the PLE method with off-line clean-up. Feasibility of the SPLE method was further demonstrated by applying it to five real soil samples collected in Ethiopia. (C) 2007 Published by Elsevier B.V

Development of a pressurized liquid extraction and clean-up procedure for the determination of alpha-endosulfan, beta-endosulfan and endosulfan sulfate in aged contaminated Ethiopian soils

Pressurized liquid extraction (PLE) was investigated for the extraction of two endosulfan isomers and their metabolite from two real contaminated soil samples. PLE for 3 x 10 min at 100 degrees C was proven to be more exhaustive than Soxhlet extraction (SOX) in one soil sample. On the other soil sample investigated the method was found to be equally exhaustive as SOX. The use of hazardous organic solvents such as n-hexane, toluene, and diethyl ether has been avoided in PLE and clean-up. Instead less toxic solvents have been used both at the extraction step (acetone/n-heptane) and clean-up step (ethyl acetate/n-heptane). A column Florisil clean-up procedure that consumes relatively low solvent volumes has been optimized and applied to purify soil extracts. The developed analytical procedure was validated by applying it to a certified reference soil material (CRM811-050). A recovery of 103% total endosulfan residue was obtained versus certified values. (c) 2005 Elsevier B.V. All rights reserved

Development of a solid-phase extraction method for the determination of polychlorinated biphenyls in water

Polychlorinated biphenyls (PCBs) in water were extracted with a rebuilt extraction unit using 47 mm C18 solid-phase extraction (SPE) disks. Three types of disks (SPEC, ENVI and Empore) were investigated for the extraction of seven PCBs from 1 l reagent water spiked at two concentration levels (20 and 1000 ng/l). The Empore disks produced the best analyte recoveries (91–107% with R.S.D. of 1–8%) at the low concentration level and displayed no leaking tendency. Empore disks were therefore considered superior to ENVI and SPEC disks for the conditions outlined in this work. The obtained extracts were dried and purified in an additional clean-up step using custom-made columns containing Florisil and Na2SO4. For water containing large amounts of organic matter, a pre-filtration was included. Final analysis was carried out on a dual-column GC–electron-capture detection system with on-column injection. The optimised extraction method, including clean-up, was less time-consuming and used less hazardous organic solvents than conventional liquid–liquid extraction (LLE) methods. Recoveries were 92–102% with R.S.D. of 3–8%

Selective pressurized liquid extraction of polychlorinated biphenyls in sediment.

A selective pressurized liquid extraction procedure (SPLE) was developed for a fast determination of polychlorinated biphenyls in sediment. The final method was performed at 100 degrees C with heptane/dichloromethane (90:10, v/v) as extraction solvent for 2 x 5 min. Sulfuric acid impregnated silica was placed downstream of the sample in the extraction cell to remove interfering components. This simultaneous extraction/clean-up was performed in 20 min, with an average congener recovery of 92% compared to a classical 24 h Soxhlet methodology and 2 h of external manual clean-up