725 research outputs found

    Optimal Teleportation Based on Bell Measurement

    Get PDF
    We study optimal teleportation based on the Bell measurements. An explicit expression for the quantum channel associated with the optimal teleportation with an arbitrary mixed state resource is presented. The optimal transmission fidelity of the corresponding quantum channel is calculated and shown to be related to the fully entangled fraction of the quantum resource, rather than the singlet fraction as in the standard teleportation protocol.Comment: 7 pages, latex, no figure

    Rapid micromixer via ferrofluids

    Get PDF
    AbstractPerformances of a micromixer based on ferrofluids are predicted numerically. A permanent magnet is used to induce transient interactive flows between a water-based ferrofluid and water. The external magnetic field causes the ferrofluid to expand significantly and uniformly toward miscible water, associated with a great number of extremely fine fingering structures on the interface in the upstream and downstream regions of the microchannel. These pronounced fingering patterns, which mimic the experimental observations of Wen et al. (2009), increase the mixing interfacial length dramatically. Along with the dominant diffusion effects occurring around the circumferential regions of the fine finger structures, the mixing efficiency increases significantly. The mixing efficiency can be as high as 95% within 2.0 s and a distance of 3.0 mm from the inlet of the mixing channel, when the applied peak magnetic field is 145.8 Oe. The proposed mixing scheme not only provides an excellent mixing, even in simple microchannel, but also can be easily applied to lab-on-a-chip applications with an external permanent magnet

    Recent Development of Blue Fluorescent OLED Materials and Devices

    Full text link

    Darboux Transformations for a Lax Integrable System in 2n2n-Dimensions

    Full text link
    A 2n2n-dimensional Lax integrable system is proposed by a set of specific spectral problems. It contains Takasaki equations, the self-dual Yang-Mills equations and its integrable hierarchy as examples. An explicit formulation of Darboux transformations is established for this Lax integrable system. The Vandermonde and generalized Cauchy determinant formulas lead to a description for deriving explicit solutions and thus some rational and analytic solutions are obtained.Comment: Latex, 14 pages, to be published in Lett. Math. Phy

    Revisiting the Bs(∗)B^{(*)}_s-Meson Production at the Hadronic Colliders

    Full text link
    The production of heavy-flavored hadron at the hadronic colliders provides a challenging opportunity to test the validity of pQCD predictions. There are two mechanisms for the Bs(∗)B^{(*)}_s hadroproduction, i.e. the gluon-gluon fusion mechanism via the subprocess g+g→Bs(∗)+b+sˉg+g\rightarrow B^{(*)}_s+b+\bar{s} and the extrinsic heavy quark mechanism via the subprocesses g+bˉ→Bs(∗)+sˉg+\bar{b}\to B^{(*)}_s +\bar{s} and g+s→Bs(∗)+bg+s\to B^{(*)}_s +b, both of which shall have sizable contributions in proper kinematic region. Different from the fixed-flavor-number scheme (FFNS) previously adopted in the literature, we study the Bs(∗)B^{(*)}_s hadroproduction under the general-mass variable-flavor-number scheme (GM-VFNS), in which we can consistently deal with the double counting problem from the above two mechanisms. Properties for the Bs(∗)B^{(*)}_s hadroproduction are discussed. To be useful reference, a comparative study of FFNS and GM-VFNS is presented. Both of which can provide reasonable estimations for the Bs(∗)B^{(*)}_s hadroproduction. At the Tevatron, the difference between these two schemes is small, however such difference is obvious at the LHC. The forthcoming more precise data on LHC shall provide a good chance to check which scheme is more appropriate to deal with the Bs(∗)B^{(*)}_s-meson production and to further study the heavy quark components in hadrons.Comment: 18 pages, 8 figures, 4 tables. To match the published version. To be published in Eur.Phys.J.

    High-throughput avian molecular sexing by SYBR green-based real-time PCR combined with melting curve analysis

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Combination of <it>CHD </it>(chromo-helicase-DNA binding protein)-specific polymerase chain reaction (PCR) with electrophoresis (PCR/electrophoresis) is the most common avian molecular sexing technique but it is lab-intensive and gel-required. Gender determination often fails when the difference in length between the PCR products of <it>CHD-Z </it>and <it>CHD-W </it>genes is too short to be resolved.</p> <p>Results</p> <p>Here, we are the first to introduce a PCR-melting curve analysis (PCR/MCA) to identify the gender of birds by genomic DNA, which is gel-free, quick, and inexpensive. <it>Spilornis cheela hoya </it>(<it>S. c. hoya</it>) and <it>Pycnonotus sinensis </it>(<it>P. sinensis</it>) were used to illustrate this novel molecular sexing technique. The difference in the length of <it>CHD </it>genes in <it>S. c. hoya </it>and <it>P. sinensis </it>is 13-, and 52-bp, respectively. Using Griffiths' P2/P8 primers, molecular sexing failed both in PCR/electrophoresis of <it>S. c. hoya </it>and in PCR/MCA of <it>S. c. hoya </it>and <it>P. sinensis</it>. In contrast, we redesigned sex-specific primers to yield 185- and 112-bp PCR products for the <it>CHD-Z </it>and <it>CHD-W </it>genes of <it>S. c. hoya</it>, respectively, using PCR/MCA. Using this specific primer set, at least 13 samples of <it>S. c. hoya </it>were examined simultaneously and the Tm peaks of <it>CHD-Z </it>and <it>CHD-W </it>PCR products were distinguished.</p> <p>Conclusion</p> <p>In this study, we introduced a high-throughput avian molecular sexing technique and successfully applied it to two species. This new method holds a great potential for use in high throughput sexing of other avian species, as well.</p

    A reduction of unilateral ureteral obstruction-induced renal fibrosis by a therapy combining valsartan with aliskiren

    Get PDF
    Wu WP, Chang CH, Chiu YT, Ku CL, Wen MC, Shu KH, Wu MJ. A reduction of unilateral ureteral obstruction-induced renal fibrosis by a therapy combining valsartan with aliskiren. Am J Physiol Renal Physiol 299: F929-F941, 2010. First published August 4, 2010; doi:10.1152/ajprenal.00192.2010.-The protective effect of combination therapy with valsartan and aliskiren against renal fibrosis remains to be defined. This study was undertaken to examine the protective effects of the combination of valsartan and aliskiren against renal fibrosis induced by unilateral ureteral obstruction (UUO). Combination therapy with valsartan (15 mg . kg(-1) . day(-1)) and aliskiren (10 mg . kg(-1) . day(-1)), valsartan monotherapy (30 mg . kg(-1) . day(-1)), and aliskiren monotherapy (20 mg . kg(-1) . day(-1)) all significantly ameliorated the increase in blood urea nitrogen and the degree of hydronephrosis determined by the increase in weight and length of the obstructed kidney. The dose titration study and blood pressure measurement confirmed that the combination therapy provided a greater benefit independent of the vasodilatory effect. There were no significant changes in serum levels of creatinine, sodium, and potassium in UUO rats and any treatment groups. Combination therapy also attenuated UUO-related increases in the scores of tubular dilatation, interstitial volume, interstitial collagen deposition, alpha-smooth muscle actin, the activation of ERK 1/2, the infiltration of monocytes/macrophages, the mRNA expression of snail-1, and transforming growth factor-beta 1 to a greater extent compared with aliskiren or valsartan used alone. The mRNA expression of renin and the (pro) renin receptor significantly increased after UUO. Combination therapy and monotherapy of valsartan and aliskiren had a comparable enhancing effect on the mRNA expression of renin, whereas all these treatments did not affect the expression of the (pro) renin receptor. In conclusion, a direct renin inhibitor in conjunction with an angiotensin II receptor blocker exerts increased renal protection against renal fibrosis and inflammation during obstruction over either agent alone

    Electronic charge and orbital reconstruction at cuprate-titanate interfaces

    Full text link
    In complex transition metal oxide heterostructures of physically dissimilar perovskite compounds, interface phenomena can lead to novel physical properties not observed in either of their constituents. This remarkable feature opens new prospects for technological applications in oxide electronic devices based on nm-thin oxide films. Here we report on a significant electronic charge and orbital reconstruction at interfaces between YBa2Cu3O6 and SrTiO3 studied using local spin density approximation (LSDA) with intra-atomic Coulomb repulsion (LSDA+U). We show that the interface polarity results in the metallicity of cuprate-titanate superlattices with the hole carriers concentrated predominantly in the CuO2 and BaO layers and in the first interface TiO2 and SrO planes. We also find that the interface structural relaxation causes a strong change of orbital occupation of Cu 3d orbitals in the CuO2 layers. The concomitant change of Cu valency from +2 to +3 is related to the partial occupation of the Cu 3d3z2−r23d_{3z^2-r^2} orbitals at the interface with SrO planes terminating SrTiO3. Interface-induced predoping and orbital reconstruction in CuO2 layers are key mechanisms which control the superconducting properties of field-effect devices developed on the basis of cuprate-titanate heterostructures.Comment: 11 pages, 8 figures, to appear in the "Proceedings of Third Joint HLRB and KONWIHR Result and Reviewing Workshop", Springer 200

    Flow-FISH analysis and isolation of clostridial strains in an anaerobic semi-solid bio-hydrogen producing system by hydrogenase gene target

    Get PDF
    By using hydrogenase gene-targeted polymerase chain reaction (PCR) and reverse transcriptase PCR (RT-PCR), the predominant clostridial hydrogenase that may have contributed to biohydrogen production in an anaerobic semi-solid fermentation system has been monitored. The results revealed that a Clostridium pasteurianum-like hydrogenase gene sequence can be detected by both PCR and RT-PCR and suggested that the bacterial strain possessing this specific hydrogenase gene was dominant in hydrogenase activity and population. Whereas another Clostridium saccharobutylicum-like hydrogenase gene can be detected only by RT-PCR and suggest that the bacterial strain possessing this specific hydrogenase gene may be less dominant in population. In this study, hydrogenase gene-targeted fluorescence in situ hybridization (FISH) and flow cytometry analysis confirmed that only 6.6% of the total eubacterial cells in a hydrogen-producing culture were detected to express the C. saccharobutylicum-like hydrogenase, whereas the eubacteria that expressed the C. pasteurianum-like hydrogenase was 25.6%. A clostridial strain M1 possessing the identical nucleotide sequences of the C. saccharobutylicum-like hydrogenase gene was then isolated and identified as Clostridium butyricum based on 16S rRNA sequence. Comparing to the original inoculum with mixed microflora, either using C. butyricum M1 as the only inoculum or co-culturing with a Bacillus thermoamylovorans isolate will guarantee an effective and even better production of hydrogen from brewery yeast waste
    • 

    corecore