Relevance between Cassava Starch Liquefied by Phenol and Modification of Phenol-Formaldehyde Resin Wood Adhesive

A novel type of phenol-formaldehyde (PF) resin was prepared by utilizing the liquefaction products liquefied by phenol under acidic conditions and then reacted with formaldehyde under alkaline conditions. The relationship between the liquefaction behavior of cassava starch and the properties of modified PF resin wood adhesive was studied. The effects of the liquid–solid ratio of phenol to cassava starch, sulfuric acid usage, and liquefaction time on the liquefaction residue rate and relative crystallinity of cassava starch were determined. The results showed that the bonding strength of modified PF resin decreased gradually with the decrease of the liquid–solid ratio. It was a great surprise that bonding strength still met the requirement of the national standard of 0.7 MPa when the liquid–solid ratio was 1.0. The detailed contents were analyzed through FT-IR, SEM, and XRD. In terms of the utilization of bio-materials for liquefaction to synthesize wood adhesive, cassava starch may be superior to the others

Doping silver nanoparticles into reverse osmosis membranes for antibacterial properties

Polyamide composite reverse osmosis (RO) membranes occupy an important position in water treatment. However, membrane fouling, especially biofouling, can lead to a significant decrease in membrane permeability. Therefore, reducing biological contamination is a significant and important property of an RO membrane. In this article, a hypothesis on the development of a new kind of RO membrane for antibacterial purposes was prepared by the modification of gallic acid (GA) and silver nanoparticles (AgNPs). Then, experiments were carried out to verify the hypothesis, getting a modified RO membrane with the composite of GA@AgNPs. The water flux of the GA@AgNPs RO membrane was 31.1 L·m−2·h−1, which was 46.7% higher than that of the original membrane, while the rejection rate of salt remained at 93.8–97.6%. Moreover, the GA@AgNPs RO membranes exhibited outstanding antibacterial properties with more than 99.9% antibacterial efficiency against both Escherichia coli and Staphylococcus aureus. Our work provides a new idea for solving the problem of biofouling RO membranes

Characterization of cyclophilin-encoding genes in Phytophthora

Recent research has shown that cyclophilins, proteins that catalyze the isomerization of peptidyl–prolyl bonds, play a variety of important roles in infection, including facilitating host penetration and colonization and activating pathogen effector proteins within the host cytoplasm. In the current study, bioinformatic analysis of the genomes of three species of plant pathogens in the genus Phytophthora has revealed extensive synteny between the 20 or 21 members of the cyclophilin gene family. In P. infestans, extensive EST studies give evidence of the expression of 14 of the 21 genes. Sequences homologous to 12 of the 14 expressed P. infestans cyclophilins were isolated using PCR and gene-specific primers in the broad host range pathogen, P. nicotianae. Quantitative real-time PCR mea- surements of transcript levels in P. nicotianae at four stages of asexual development and during infection of resistant and susceptible tobacco plants gave evidence of expression of seven of the P. nicotianae homologs. The most abundantly expressed gene, PnCyPA , has a lower mRNA level in zoospores compared to other stages of asexual develop- ment and its expression increases during infection of susceptible plants. Immunocytochemical studies indicate that PnCyPA occurs in the nucleus and cytoplasm of P. nicotianae cells and is secreted from germinated cysts.Some aspects of this study were conducted with the support of Bayer CropScience and the Australian Research Council

Adsorption of Malachite Green and Pb²⁺ by KMnO₄-Modified Biochar: Insights and Mechanisms

In this study, the feasibility and mechanism of Pb2+ and malachite green (MG) adsorption from wastewater using KMnO4-modified bamboo biochar (KBC) was evaluated. The KBC was characterized by SEM–EDS, XRD, FTIR and XPS. The adsorption results for Pb2+ conformed to pseudo-second-order kinetics and the Langmuir model theory. Unlike the case for Pb2+, the Freundlich model better described the adsorption behaviour of MG, indicating that adsorption occurred within multiple molecular layers. Both pseudo-first-order kinetics and pseudo-second-order kinetics fit the MG adsorption data well, indicating that physical adsorption was involved in the adsorption process. In addition, the maximum adsorption capacity for Pb2+/MG was 123.47/1111.11 mg·g−1, KBC had high adsorption capacities for Pb2+ and MG, and the mechanisms of Pb2+ adsorption were mineral precipitation, functional group complexation, and cation-π interactions, while the main mechanisms for MG adsorption were pore filling, π–π interactions, and functional group complexation. In this study, KMnO4-modified biochar was prepared and used as an efficient adsorbent, and showed good application prospects for treatment of wastewater containing MG and Pb2+

Effect of Copper (II) Sulfate on the Properties of Urea Formaldehyde Adhesive

The purpose of this work is to investigate the effects of copper (II) sulfate on the formaldehyde release and the mechanical properties of urea formaldehyde (UF) adhesive. Copper (II) sulfate has been used as a formaldehyde scavenger in UF resin, and its effects on the physical and chemical properties of UF adhesive have been studied. Moreover, the mechanical properties and formaldehyde release of plywood prepared with modified UF resin have been determined. The UF resin has been characterized by Fourier-transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA). FTIR spectra showed that the addition of copper (II) sulfate to the UF resin does not affect the IR absorptions of its functional groups, implying that the structure of UF is not modified. Further results showed that the free formaldehyde content of the UF resin incorporating 3% copper (II) sulfate was 0.13 wt.%, around 71% lower than that of the untreated control UF adhesive. With a copper (II) sulfate content of 3%, the formaldehyde release from treated plywood was 0.74 mg·L−1, around 50% lower than that from the control UF adhesive, and the bonding strength reached 1.73 MPa, around 43% higher than that of the control

Synthesis and Characterization of Sucrose-Melamine-Formaldehyde Adhesives

The objective of this project was to use sucrose as a partial substitute for melamine in the synthesis of sucrose–melamine-formaldehyde (SMF) resin. The SMF was synthesized in a base condition. The wet bonding strength, shelf life, and formaldehyde emission of the SMF resin were determined. Fourier transform infrared spectroscopy (FT-IR) and mass spectroscopy (MS) were employed to analyze the chemical structure of the SMF resin. The shelf life of SMF resin increased as the sucrose content increased. Also as the sucrose content increased, the wet bonding strength decreased and the formaldehyde emissions decreased. The FT-IR and MS spectra revealed the structures of sucrose, melamine, and formaldehyde in the SMF, and chemical reactions of SMF resins occurred between the three primary hydroxyl groups of sucrose and methylolmelamine. Based on the results of this study, a sucrose to melamine mole ratio of 0.4:1 was determined to be the optimal ratio for the SMF resin