Electrostatic fields for the control of evaporating charged fuel sprays

The current socio-economic shift towards electrification of the transport sector and development of hybrid thermal–electric propulsion systems provides new opportunities for the development of ‘clean’ aviation technologies. In this work, the use of electrostatic fields to control the location of electrically charged fuel droplets is proposed as a novel technology to enhance pre-evaporation of liquid sprays in confined spaces. An electrospray in cross-flow is numerically investigated using large-eddy simulations for a range of flow and droplet conditions in order to study the feasibility of the approach. A deterministic model is further introduced to compute the trajectory of single droplets in a steady cross-flow. This enables a separation of the effects of turbulence, droplet repulsion and evaporation through comparison with data obtained from the large-eddy simulations, and at the same time provides a cheap computational tool to explore a wider range of operating conditions. It is shown that external electrostatic fields below the breakdown threshold of air can significantly change the trajectory of charged droplets at moderate flow velocities. Moreover, electrostatic forces acting in the opposite direction of the mean cross-flow can potentially be used to stabilise the spray position within a confined region, hence allowing for an increase of the residence time available for full evaporation. The application and modulation of such electrostatic forces is envisioned as a new paradigm to achieve ‘targeted evaporation’ in next-generation hybrid thermal–electric aero-engines and to improve the fuel-oxidiser mixing quality. The electrical power associated with the external electrostatic field to achieve droplet stabilisation is negligible compared to the thermal power released by complete combustion of the injected fuel. In addition, it is shown that stabilisation of the droplets enhances the evaporation rate (by more than 30%) and mixing quality due to an increase of the relative velocity between the droplets and the gas flow, as well as the turbulence induced by the stagnating spray cloud. The results of this work offer new insights for the development of advanced fuel injection strategies based on electrohydrodynamics

Nanoscale friction of biomimetic hair surfaces

We investigate the nanoscale friction between biomimetic hair surfaces using chemical colloidal probe atomic force microscopy experiments and nonequilibrium molecular dynamics simulations. In the experiments, friction is measured between water-lubricated silica surfaces functionalised with monolayers formed from either octadecyl or sulfonate groups, which are representative of the surfaces of virgin and ultimately bleached hair, respectively. In the simulations, friction is monitored between coarse-grained model hair surfaces with different levels of chemical damage, where a specified amount of grafted octadecyl groups are randomly replaced with sulfonate groups. The sliding velocity dependence of friction in the simulations can be described using an extended stress-augmented thermally activation model. As the damage level increases in the simulations, the friction coefficient generally increases, but its sliding velocity-dependence decreases. At low sliding velocities, which are closer to those encountered experimentally and physiologically, we observe a monotonic increase of the friction coefficient with damage ratio, which is consistent with our new experiments using biomimetic surfaces and previous ones using real hair. This observation demonstrates that modified surface chemistry, rather than roughness changes or subsurface damage, control the increase in nanoscale friction of bleached or chemically damaged hair. We expect the methods and biomimetic surfaces proposed here to be useful to screen the tribological performance of hair care formulations both experimentally and computationally

Evaluation of procalcitonin-guided antimicrobial stewardship in patients admitted to hospital with COVID-19 pneumonia

BACKGROUND: Procalcitonin is a biomarker that may be able to identify patients with COVID-19 pneumonia who do not require antimicrobials for bacterial respiratory tract co-infections. OBJECTIVES: To evaluate the safety and effectiveness of a procalcitonin-guided algorithm in rationalizing empirical antimicrobial prescriptions in non-critically ill patients with COVID-19 pneumonia. METHODS: Retrospective, single-site, cohort study in adults hospitalized with confirmed or suspected COVID-19 pneumonia and receiving empirical antimicrobials for potential bacterial respiratory tract co-infection. Regression models were used to compare the following outcomes in patients with and without procalcitonin testing within 72 h of starting antimicrobials: antimicrobial consumption (DDD); antimicrobial duration; a composite safety outcome of death, admission to HDU/ICU or readmission to hospital within 30 days; and length of admission. Procalcitonin levels of ≤0.25 ng/L were interpreted as negatively predictive of bacterial co-infection. Effects were expressed as ratios of means (ROM) or prevalence ratios (PR) accordingly. RESULTS: 259 patients were included in the final analysis. Antimicrobial use was lower in patients who had procalcitonin measured within 72 h of starting antimicrobials: mean antimicrobial duration 4.4 versus 5.4 days, adjusted ROM 0.7 (95% CI 0.6–0.9); mean antimicrobial consumption 6.8 versus 8.4 DDD, adjusted ROM 0.7 (95% CI 0.6–0.8). Both groups had similar composite safety outcomes (adjusted PR 0.9; 95% CI 0.6–1.3) and lengths of admission (adjusted ROM 1.3; 95% CI 0.9–1.6). CONCLUSIONS: A procalcitonin-guided algorithm may allow for the safe reduction of antimicrobial usage in hospitalized non-critically ill patients with COVID-19 pneumonia

Why Sentence Modality in Spontaneous Speech is More Difficult to Classify and why this Fact is not too bad for Prosody

We show in this paper that the labeling of sentence modality in German, esp. of questions vs. non-questions, is more difficult for spontaneous than for read speech and easier for nonelliptic than for elliptic utterances. However, the prosodic marking of sentence modality is more important in elliptic utterances that occur more often in spontaneous speech

Coarse-grained molecular models of the surface of hair

We present a coarse-grained molecular model of the surface of human hair, which consists of a supported lipid monolayer, in the MARTINI framework. Using coarse-grained molecular dynamics (MD) simulations, we identify a lipid grafting distance that yields a monolayer thickness consistent with both atomistic MD simulations and experimental measurements of the hair surface. Coarse-grained models for fully-functionalised, partially damaged, and fully damaged hair surfaces are created by randomly replacing neutral thioesters with anionic sulfonate groups. This mimics the progressive removal of fatty acids from the hair surface by bleaching and leads to chemically heterogeneous surfaces. Using molecular dynamics (MD) simulations, we study the island structures formed by the lipid monolayers at different degrees of damage in vacuum and in the presence of polar (water) and non-polar (n-hexadecane) solvents. We also use MD simulations to compare the wetting behaviour of water and n-hexadecane droplets on the model surfaces through contact angle measurements, which are compared to experiments using virgin and bleached hair. The model surfaces capture the experimentally-observed transition of the hair surface from hydrophobic (and oleophilic) to hydrophilic (and oleophobic) as the level of bleaching damage increases. By selecting surfaces with specific damage ratios, we obtain contact angles from the MD simulations that are in good agreement with experiments for both solvents on virgin and bleached human hairs. To negate the possible effects of microscale curvature and roughness of real hairs on wetting, we also conduct additional experiments using biomimetic surfaces that are co-functionalised with fatty acids and sulfonate groups. In both the MD simulations and experiments, the cosine of the water contact angle increases linearly with the sulfonate group surface coverage with a similar slope. We expect that the proposed systems will be useful for future molecular dynamics simulations of the adsorption and tribological behaviour of hair, as well as other chemically heterogeneous surfaces

Effects of surfactant adsorption on the wettability and friction of biomimetic surfaces

The properties of solid–liquid interfaces can be markedly altered by surfactant adsorption. Here, we use molecular dynamics (MD) simulations to study the adsorption of ionic surfactants at the interface between water and heterogeneous solid surfaces with randomly arranged hydrophilic and hydrophobic regions, which mimic the surface properties of human hair. We use the coarse-grained MARTINI model to describe both the hair surfaces and surfactant solutions. We consider negatively-charged virgin and bleached hair surface models with different grafting densities of neutral octadecyl and anionic sulfonate groups. The adsorption of cationic cetrimonium bromide (CTAB) and anionic sodium dodecyl sulfate (SDS) surfactants from water are studied above the critical micelle concentration. The simulated adsorption isotherms suggest that cationic surfactants adsorb to the surfaces via a two-stage process, initially forming monolayers and then bilayers at high concentrations, which is consistent with previous experiments. Anionic surfactants weakly adsorb via hydrophobic interactions, forming only monolayers on both virgin and medium bleached hair surfaces. We also conduct non-equilibrium molecular dynamics simulations, which show that applying cationic surfactant solutions to bleached hair successfully restores the low friction seen with virgin hair. Friction is controlled by the combined surface coverage of the grafted lipids and the adsorbed CTAB molecules. Treated surfaces containing monolayers and bilayers both show similar friction, since the latter are easily removed by compression and shear. Further wetting MD simulations show that bleached hair treated with CTAB increases the hydrophobicity to similar levels seen for virgin hair. Treated surfaces containing CTAB monolayers with the tailgroups pointing predominantly away from the surface are more hydrophobic than bilayers due to the electrostatic interactions between water molecules and the exposed cationic headgroups

Why sentence modality in spontaneous speech is more difficult to classify and why this fact is not too bad for prosody

We show in this paper that the labeling of sentence modality in German, esp. of questions vs. non-questions, is more difficult for spontaneous than for read speech and easier for non-elliptic than for elliptic utterances. However, the prosodic marking of sentence modality is more important in elliptic utterances that occur more often in spontaneous speech. (orig.)SIGLEAvailable from TIB Hannover: RR 5221(46) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekBundesministerium fuer Forschung und Technologie (BMFT), Bonn (Germany)DEGerman