Mass-transport resistances of acid and alkaline ionomer layers: A microelectrode study part 1 - Microelectrode development

The use of microelectrodes to study localized mass-transport phenomena in fuel-cell catalyst layers is an increasingly valuable tool. However, existing microelectrode cells have been used in static, equilibrated environment modes with poorly controlled interfaces. In this work, we present a microelectrode cell design that expands the experimental space addressable by microelectrodes to include mechanical pressure, gas flow and ionomer medium, and experimental throughput. The feasibility of the design is examined for fuel-cell reactions, with oxygen reduction currents independent of mechanical pressure and gas flowrate. Finally, cell equilibration time and IR drop across the electrolyte are estimated. The new cell design is robust and provides a consistent base from which to perform more complicated studies examining mass-transport properties of ionomers and/or the electrochemical reaction kinetics of hydrogen oxidation and oxygen reduction

Participatory Evaluation for Community-based Rehabilitation

Background: Community Based Rehabilitation (CBR) is the strategy promoted by the World Health Organization (WHO) and other United Nations (UN) agencies as an effective way to improve the lives and wellbeing of people with disabilities in underserved regions. During the last decade CBR has undergone major reconceptualization, and is now a multi-sectorial approach, as reflected in the new CBR guidelines. Evaluation of Community-based Rehabilitation (CBR) is considered important for developing good practice. However, evaluations remain scarce and as a consequence very little is known about how CBR benefits persons with disabilities and their families. Consensus is lacking about appropriate evaluation methods in CBR. Leading international frameworks such as the United Nations Convention on the Rights of Persons with Disabilities (CRPD) and the WHO CBR Guidelines have participation as one of the core principles in their human rights based approach to disability, including participation in programme evaluation. The WHO CBR Guidelines strongly recommend the application of participatory evaluation (PE) approaches in CBR. However, while there are many models of PE in mainstream development, it is unclear which may be appropriate for use in CBR. The aim of this research is to identify, field test, adapt and assess an existing model of Participatory Evaluation (PE) in a real world environment. This thesis, rather than researching the impact of CBR on people with disabilities, focuses on the evaluation process itself and the variables that affect changes in stakeholders thinking and behavior as a result of engagement in the evaluation. Methodology There were two research components: 1. Selection of PE model to be adapted to CBR: Three steps were taken to provide background for an expert group to select one model for field-testing: An online survey of current evaluation capacities and practices within CBR programmes internationally; A systematic review of PE models used in international development; A Delphi study with CBR experts to derive criteria for good PE models for CBR. The expert group used the research findings and selected Outcome Mapping (OM) as PE model to be implemented and field-tested in a CBR programme in Jamaica. 2. Field testing of the PE model in a Jamaican CBR programme: This research component consisted of three main elements: The implementation and adaptation of PE (OM) in a Jamaican CBR Programme; Interviews and focus groups collecting narratives about the evaluation process from stakeholders were undertaken to explore the usability of the adapted PE model in this programme. Changes in “process use”, i.e. how the stakeholders in the evaluation learned from and acted upon their involvement in the PE processes, were explored; The participatory development of a framework that participants felt could guide PE in CBR, one that can be locally adapted to different situations. Conclusion: The evaluation participants felt there were significant limitations of the OM approach in their setting and therefore proposed a substantially modified model. They favored a more fluid PE framework, which was flexible, adaptive and iterative, rather than a rigid approach, and one that focused on creating a safe space for sharing, learning and taking action. The thesis concludes with a call for more critical and bottom-up approaches of evaluation that move away from control-oriented approaches towards a more experimental and adaptive problem and process-orientated mindset of evaluative thinking

Quantum Memories. A Review based on the European Integrated Project "Qubit Applications (QAP)"

We perform a review of various approaches to the implementation of quantum memories, with an emphasis on activities within the quantum memory sub-project of the EU Integrated Project "Qubit Applications". We begin with a brief overview over different applications for quantum memories and different types of quantum memories. We discuss the most important criteria for assessing quantum memory performance and the most important physical requirements. Then we review the different approaches represented in "Qubit Applications" in some detail. They include solid-state atomic ensembles, NV centers, quantum dots, single atoms, atomic gases and optical phonons in diamond. We compare the different approaches using the discussed criteria.Comment: 22 pages, 12 figure

Inconsistent boundaries

Research on this paper was supported by a grant from the Marsden Fund, Royal Society of New Zealand.Mereotopology is a theory of connected parts. The existence of boundaries, as parts of everyday objects, is basic to any such theory; but in classical mereotopology, there is a problem: if boundaries exist, then either distinct entities cannot be in contact, or else space is not topologically connected (Varzi in Noûs 31:26–58, 1997). In this paper we urge that this problem can be met with a paraconsistent mereotopology, and sketch the details of one such approach. The resulting theory focuses attention on the role of empty parts, in delivering a balanced and bounded metaphysics of naive space.PostprintPeer reviewe

Granular cell tumour of the soft tissues: a case report and literature review

Granular cell tumours (GCT) of the soft tissues are rare benign tumours but some time may be difficult to distinguish from malignant neoplasms. It is important that clinicians are aware of their existence. We present a new case of GCT of the soft tissues followed by a brief review of literature

Anatomical and biomechanical evaluation of the tension band technique in patellar fractures

Tension band wiring for patellar fractures is common, but some recent reports refer to disadvantages of this approach. Our anatomical and biomechanical study focused on use of tension band techniques in patellar fractures. The anatomy of the patella and tendon insertion was examined with knee magnetic resonance imaging (MRI) and correlated with the technical requirements of the tension band. Tension band wiring over tendinous tissue was simulated and calculated with a cyclic biomechanical test on cow patellae. According to tension band templating on the MRI section, Kirschner wire insertion was needed for the tension band to turn over the tendinous tissue. The tension band became more stable while turning over less tendinous tissue and more adjacent bone surface. Nevertheless, cyclic loading tests indicate that all tension band applications in this study lose their initial stability. Excessive initial compression by the tension band resulted in bending of the Kirschner wire and thus reduction failure. For optimum stabilisation, tension force transfer should be done directly on bone or at least material that protects the tendon would be useful

Young neutron stars with soft gamma ray emission and anomalous X-ray pulsar

The observational properties of Soft Gamma Repeaters and Ano\-malous X-ray Pulsars (SGR/AXP) indicate to necessity of the energy source different from a rotational energy of a neutron star. The model, where the source of the energy is connected with a magnetic field dissipation in a highly magnetized neutron star (magnetar) is analyzed. Some observational inconsistencies are indicated for this interpretation. The alternative energy source, connected with the nuclear energy of superheavy nuclei stored in the nonequilibrium layer of low mass neutron star is discussed.Comment: 29 pages, 13 figures, Springer International Publishing Switzerland 2016 A.W. Alsabti, P. Murdin (eds.), Handbook of Supernova

The Transient Receptor Potential Ion Channel TRPV6 Is Expressed at Low Levels in Osteoblasts and Has Little Role in Osteoblast Calcium Uptake

Background: TRPV6 ion channels are key mediators of regulated transepithelial absorption of Ca2+ within the small intestine. Trpv6-/- mice were reported to have lower bone density than wild-type littermates and significant disturbances in calcium homeostasis that suggested a role for TRPV6 in osteoblasts during bone formation and mineralization. TRPV6 and molecules related to transepithelial Ca2+ transport have been reported to be expressed at high levels in human and mouse osteoblasts. Results: Transmembrane ion currents in whole cell patch clamped SaOS-2 osteoblasts did not show sensitivity to ruthenium red, an inhibitor of TRPV5/6 ion channels, and 45Ca uptake was not significantly affected by ruthenium red in either SaOS-2 (P = 0.77) or TE-85 (P = 0.69) osteoblastic cells. In contrast, ion currents and 45Ca uptake were both significantly affected in a human bronchial epithelial cell line known to express TRPV6. TRPV6 was expressed at lower levels in osteoblastic cells than has been reported in some literature. In SaOS-2 TRPV6 mRNA was below the assay detection limit; in TE-85 TRPV6 mRNA was detected at 6.90±1.9 × 10−5 relative to B2M. In contrast, TRPV6 was detected at 7.7±3.0 × 10−2 and 2.38±0.28 × 10−4 the level of B2M in human carcinoma-derived cell lines LNCaP and CaCO-2 respectively. In murine primary calvarial osteoblasts TRPV6 was detected at 3.80±0.24 × 10−5 relative to GAPDH, in contrast with 4.3±1.5 × 10−2 relative to GAPDH in murine duodenum. By immunohistochemistry, TRPV6 was expressed mainly in myleocytic cells of the murine bone marrow and was observed only at low levels in murine osteoblasts, osteocytes or growth plate cartilage. Conclusions: TRPV6 is expressed only at low levels in osteoblasts and plays little functional role in osteoblastic calcium uptake

Analytical model for the calculation of lateral velocity distributions in potential cross-sections

[EN] The hydraulic modeling of water depth and flow velocities in open channel flows that were fitted by power-law cross-section stand out for their versatility, allowing their use in numerous practical applications, both in natural and artificial channels. The determination of the hydraulic variables of depth and average velocity has been widely studied in potential cross-sections; however, the variation seen in these variables along the cross-section was not found in the literature. Knowledge of this variation allows the development of studies (e.g. to know the approximate damage in different areas of the cross-section, to analyse sediment transport, or other applications in river hydraulics). This paper presents a methodology which allows calculation of the hydraulic variables in any area of a power-law cross-section. The methodology is applied to symmetrical cross-sections, comparing its generated results with the obtained values by different computational hydraulic codes, which are thoroughly accepted by scientific community, such as CES, HEC-RAS and IBER. The obtained predictions of hydraulic parameters (using the explicit formulation described in this research) present very low errors when compared with results of other models, with great computational cost. These errors reach a root mean square error (RMSE) of 0.13 and 0.05 in the determination of velocities' lateral distribution and the ratio between velocity and average velocity. These values indicate a very successful validation for the analysed symmetrical sections.[ES] La modelización hidráulica de calados y velocidades de flujo, en cauces con secciones que admiten una representación de tipo potencial, se destaca por su versatilidad, permitiendo su utilización en numerosas aplicaciones prácticas tanto en canales naturales como artificiales. El cálculo de las variables hidráulicas (calado y velocidad media) ha sido ampliamente estudiado para este tipo de secciones. Sin embargo, en la literatura técnica no se han encontrado estudios que muestren la variación de estas magnitudes a lo largo de la sección transversal. El conocimiento de esta variación permite desarrollar estudios (ejemplo: conocer de manera aproximada los daños en diferentes zonas de la sección, analizar el transporte de sedimentos, estudiar los procesos de erosión u otras aplicaciones en hidráulica fluvial). Presentamos una metodología que permite el cálculo de las variables hidráulicas en cualquier zona de una sección tipo potencial. La metodología es aplicada a secciones simétricas, comparando los resultados generados con los obtenidos por diferentes códigos hidráulicos computacionales ampliamente aceptados por la comunidad científica (p-e- CES, HECRAS e IBER). Las predicciones de los parámetros hidráulicos obtenidas (usando la formulación explícita descrita en este artículo) presentan errores muy bajos, en comparación con otros modelos con mayor costo computacional. Estos errores alcanzan un valor promedio para la raíz del error cuadrático medio (RMSE) en el cálculo de la distribución lateral de velocidades de 0.13 y de 0.05, en el cálculo de la relación de velocidades respecto a la velocidad media. Estos valores indican una validación muy satisfactoria para las secciones simétricas analizadas.Sánchez-Romero, F.; Pérez-Sánchez, M.; López Jiménez, PA. (2018). Modelo analítico para el cálculo de distribuciones de velocidad laterales en secciones tipo potencial-ley. RIBAGUA - Revista Iberoamericana del Agua. 5(1):29-47. doi:10.1080/23863781.2018.1442189S29475