674 research outputs found
Row-switched states in two-dimensional underdamped Josephson junction arrays
When magnetic flux moves across layered or granular superconductor
structures, the passage of vortices can take place along channels which develop
finite voltage, while the rest of the material remains in the zero-voltage
state. We present analytical studies of an example of such mixed dynamics: the
row-switched (RS) states in underdamped two-dimensional Josephson arrays,
driven by a uniform DC current under external magnetic field but neglecting
self-fields. The governing equations are cast into a compact
differential-algebraic system which describes the dynamics of an assembly of
Josephson oscillators coupled through the mesh current. We carry out a formal
perturbation expansion, and obtain the DC and AC spatial distributions of the
junction phases and induced circulating currents. We also estimate the interval
of the driving current in which a given RS state is stable. All these
analytical predictions compare well with our numerics. We then combine these
results to deduce the parameter region (in the damping coefficient versus
magnetic field plane) where RS states can exist.Comment: latex, 48 pages, 15 figs using psfi
Effects of Neutrino Oscillation on the Supernova Neutrino Spectrum
The effects of three-flavor neutrino oscillation on the supernova neutrino
spectrum are studied. We calculate the expected event rate and energy spectra,
and their time evolution at the Superkamiokande (SK) and the Sudbury Neutrino
Observatory (SNO), by using a realistic neutrino burst model based on numerical
simulations of supernova explosions. We also employ a realistic density profile
based on a presupernova model for the calculation of neutrino conversion
probability in supernova envelopes. These realistic models and numerical
calculations allow us to quantitatively estimate the effects of neutrino
oscillation in a more realistic way than previous studies. We then found that
the degeneracy of the solutions of the solar neutrino problem can be broken by
the combination of the SK and SNO detections of a future Galactic supernova.Comment: 10 pages, 14 figures, corrected versio
Approximation of excitonic absorption in disordered systems using a compositional component weighted CPA
Employing a recently developed technique of component weighted two particle
Green's functions in the CPA of a binary substitutional alloy we
extend the existing theory of excitons in such media using a contact potential
model for the interaction between electrons and holes to an approximation which
interpolates correctly between the limits of weak and strong disorder. With our
approach we are also able to treat the case where the contact interaction
between carriers varies between sites of different types, thus introducing
further disorder into the system. Based on this approach we study numerically
how the formation of exciton bound states changes as the strengths of the
contact potentials associated with either of the two site types are varied
through a large range of parameter values.Comment: 27 pages RevTeX (preprint format), 13 Postscript figure file
Editorial: Special issue: “SuperDARN / Studies of Geospace Dynamics - Today and Future”
This Polar Science special issue, “SuperDARN/Studies of Geospace Dynamics - Today and Future,” originated from an international SuperDARN (Super Dual Auroral Radar Network) annual workshop held in Japan in June 2019, and is focused on studies of geospace dynamics particularly related to SuperDARN. Its purpose is to overview recent wide and active research, new scientific results and future perspectives mainly through, but not limited to, the scientific papers presented at the workshop. This special issue is an opportunity to commemorate a quarter century since the establishment of SuperDARN in 1995 and to contribute to the further development of geospace sciences and relevant technology. Thirteen valuable papers have been published covering a wide variety of scientific and technical topics. © 202
Spallation reactions. A successful interplay between modeling and applications
The spallation reactions are a type of nuclear reaction which occur in space
by interaction of the cosmic rays with interstellar bodies. The first
spallation reactions induced with an accelerator took place in 1947 at the
Berkeley cyclotron (University of California) with 200 MeV deuterons and 400
MeV alpha beams. They highlighted the multiple emission of neutrons and charged
particles and the production of a large number of residual nuclei far different
from the target nuclei. The same year R. Serber describes the reaction in two
steps: a first and fast one with high-energy particle emission leading to an
excited remnant nucleus, and a second one, much slower, the de-excitation of
the remnant. In 2010 IAEA organized a worskhop to present the results of the
most widely used spallation codes within a benchmark of spallation models. If
one of the goals was to understand the deficiencies, if any, in each code, one
remarkable outcome points out the overall high-quality level of some models and
so the great improvements achieved since Serber. Particle transport codes can
then rely on such spallation models to treat the reactions between a light
particle and an atomic nucleus with energies spanning from few tens of MeV up
to some GeV. An overview of the spallation reactions modeling is presented in
order to point out the incomparable contribution of models based on basic
physics to numerous applications where such reactions occur. Validations or
benchmarks, which are necessary steps in the improvement process, are also
addressed, as well as the potential future domains of development. Spallation
reactions modeling is a representative case of continuous studies aiming at
understanding a reaction mechanism and which end up in a powerful tool.Comment: 59 pages, 54 figures, Revie
Real and Virtual Compton Scattering off the Nucleon
A review is given of the very recent developments in the fields of real and
virtual Compton scattering off the nucleon. Both real and virtual Compton
scattering reactions are discussed at low outgoing photon energy where one
accesses polarizabilities of the nucleon. The real Compton scattering at large
momentum transfer is discussed which is asymptotically a tool to obtain
information on the valence quark wave function of the nucleon. The rapid
developments in deeply virtual Compton scattering and associated meson
electroproduction reactions at high energy, high photon virtuality and small
momentum transfer to the nucleon are discussed. A unified theoretical
description of those processes has emerged over the last few years, which gives
access to new, generalized parton distributions. The experimental status and
perspectives in these fields are also discussed.Comment: 25 pages, 17 figure
Grain Surface Models and Data for Astrochemistry
AbstractThe cross-disciplinary field of astrochemistry exists to understand the formation, destruction, and survival of molecules in astrophysical environments. Molecules in space are synthesized via a large variety of gas-phase reactions, and reactions on dust-grain surfaces, where the surface acts as a catalyst. A broad consensus has been reached in the astrochemistry community on how to suitably treat gas-phase processes in models, and also on how to present the necessary reaction data in databases; however, no such consensus has yet been reached for grain-surface processes. A team of ∼25 experts covering observational, laboratory and theoretical (astro)chemistry met in summer of 2014 at the Lorentz Center in Leiden with the aim to provide solutions for this problem and to review the current state-of-the-art of grain surface models, both in terms of technical implementation into models as well as the most up-to-date information available from experiments and chemical computations. This review builds on the results of this workshop and gives an outlook for future directions
Recommended from our members
X-ray emission from stainless steel foils irradiated by femtosecond petawatt laser pulses
We report about nonlinear growth of x-ray emission intensity emitted from plasma generated by femtosecond petawatt laser pulses irradiating stainless steel foils. X-ray emission intensity increases as ∼ I 4.5 with laser intensity I on a target. High spectrally resolved x-ray emission from front and rear surfaces of 5 μm thickness stainless steel targets were obtained at the wavelength range 1.7-2.1 Å, for the first time in experiments at femtosecond petawatt laser facility J-KAREN-P. Total intensity of front x-ray spectra three times dominates to rear side spectra for maximum laser intensity I ≈ 3.21021 W/cm2. Growth of x-ray emission is mostly determined by contribution of bremsstrahlung radiation that allowed estimating bulk electron plasma temperature for various magnitude of laser intensity on target
Stress corrosion cracking in Al-Zn-Mg-Cu aluminum alloys in saline environments
Copyright 2013 ASM International. This paper was published in Metallurgical and Materials Transactions A, 44A(3), 1230 - 1253, and is made
available as an electronic reprint with the permission of ASM International. One print or electronic copy may
be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via
electronic or other means, duplications of any material in this paper for a fee or for commercial purposes, or
modification of the content of this paper are prohibited.Stress corrosion cracking of Al-Zn-Mg-Cu (AA7xxx) aluminum alloys exposed to saline environments at temperatures ranging from 293 K to 353 K (20 °C to 80 °C) has been reviewed with particular attention to the influences of alloy composition and temper, and bulk and local environmental conditions. Stress corrosion crack (SCC) growth rates at room temperature for peak- and over-aged tempers in saline environments are minimized for Al-Zn-Mg-Cu alloys containing less than ~8 wt pct Zn when Zn/Mg ratios are ranging from 2 to 3, excess magnesium levels are less than 1 wt pct, and copper content is either less than ~0.2 wt pct or ranging from 1.3 to 2 wt pct. A minimum chloride ion concentration of ~0.01 M is required for crack growth rates to exceed those in distilled water, which insures that the local solution pH in crack-tip regions can be maintained at less than 4. Crack growth rates in saline solution without other additions gradually increase with bulk chloride ion concentrations up to around 0.6 M NaCl, whereas in solutions with sufficiently low dichromate (or chromate), inhibitor additions are insensitive to the bulk chloride concentration and are typically at least double those observed without the additions. DCB specimens, fatigue pre-cracked in air before immersion in a saline environment, show an initial period with no detectible crack growth, followed by crack growth at the distilled water rate, and then transition to a higher crack growth rate typical of region 2 crack growth in the saline environment. Time spent in each stage depends on the type of pre-crack (“pop-in” vs fatigue), applied stress intensity factor, alloy chemistry, bulk environment, and, if applied, the external polarization. Apparent activation energies (E a) for SCC growth in Al-Zn-Mg-Cu alloys exposed to 0.6 M NaCl over the temperatures ranging from 293 K to 353 K (20 °C to 80 °C) for under-, peak-, and over-aged low-copper-containing alloys (~0.8 wt pct), they are typically ranging from 20 to 40 kJ/mol for under- and peak-aged alloys, and based on limited data, around 85 kJ/mol for over-aged tempers. This means that crack propagation in saline environments is most likely to occur by a hydrogen-related process for low-copper-containing Al-Zn-Mg-Cu alloys in under-, peak- and over-aged tempers, and for high-copper alloys in under- and peak-aged tempers. For over-aged high-copper-containing alloys, cracking is most probably under anodic dissolution control. Future stress corrosion studies should focus on understanding the factors that control crack initiation, and insuring that the next generation of higher performance Al-Zn-Mg-Cu alloys has similar longer crack initiation times and crack propagation rates to those of the incumbent alloys in an over-aged condition where crack rates are less than 1 mm/month at a high stress intensity factor
Selection of antigenically advanced variants of seasonal influenza viruses
Influenza viruses mutate frequently, necessitating constant updates of vaccine viruses. To establish experimental approaches that may complement the current vaccine strain selection process, we selected antigenic variants from human H1N1 and H3N2 influenza virus libraries possessing random mutations in the globular head of the haemagglutinin protein (which includes the antigenic sites) by incubating them with human and/or ferret convalescent se
- …