Geological characterization of a lower Cambrian marine shale: implications for shale gas potential in North-Western Hunan, South China

We have investigated the geologic features of the lower Cambrian-aged Niutitang Shale in the northwestern Hunan province of South China. Our results indicate that the Niutitang Shale has abundant and highly mature algal kerogen with total organic carbon (TOC) content ranging from 0.6% to 18.2%. The equivalent vitrinite reflectance (equal-Ro) value is between 2.5% and 4.3%. Mineral constituents are dominated by quartz and clay. The average quartz content (62.8%) is much higher than that of clay minerals (26.1%), and this suggests a high brittleness index. Organic-matter pores, interparticle pores, intraparticle pores, interlaminated fractures, and structural fractures are all well developed. The porosity ranges from 0.6% to 8.8%, with an average of 4.8%, whereas the permeability varies from 0.0018 to [Formula: see text] (microdarcy) (averaging [Formula: see text]). The porosity of TOC- and clay-rich shale samples is generally higher than that of quartz-rich shale samples. The gas adsorption capacity of the Niutitang Shale varies from 2.26 to [Formula: see text], with a mean value of [Formula: see text]. The TOC content appears to significantly influence gas adsorption capacity. In general, TOC-rich samples exhibit a much higher adsorption capacity than TOC-poor samples. </jats:p

Developing a framework leveraging building information modelling to validate fire emergency evacuation

In fire emergency management, a delayed execution will cause a significant number of casualties. Conventional fire drills typically only identify a certain percentage of evacuation bottlenecks after the building has been constructed, which is hard to improve. This paper proposes an innovative framework to validate fire emergency evacuation at the early design stage. According to the experience and knowledge of fire emergency evacuation design, the proposed framework also introduces a seamless two-way information channel to embed fire emergency evacuation simulations into a BIM-based design environment. Several critical factors for fire evacuation have been reviewed in relevant domain knowledge, which is used to build virtual characters to test in experimental scenarios. The results are analyzed to validate fire emergency evacuation factors, and the feedback knowledge is stored as a knowledge model for further applications

Special issue "digital twin technology in the AEC industry"

Sustainable building design has become a hot topic over the past decades. Many standards, databases, and tools have been developed for achieving a sustainable building. Not until recently have the importance of structural engineering and its contribution to sustainable building design been full recognised. However, due to the highly fragmented and diversity of knowledge across building and infrastructure domains, there is a lack of approach that can address all the sustainable issues within the structural design. This paper reviews the sustainable design from the perspective of structural engineering: (1) reviewing the current situation; (2) identifying the gaps and difficulties; and (3) making recommendations for future improvements. The strategies and indicators, as well as BIM-enabled methodology, for sustainable structural design (SSD) are also discussed in a holistic way. The results of this investigation show that most of the methods are not doing well in terms of delivering a successful sustainable structural design. It is expected that the future BIM could probably provide such a platform to address these issues

Clonal integration promotes the growth of Phragmites australis populations in saline wetlands of the Yellow River Delta

Estuarine wetlands are highly heterogeneous due to strong interactions between freshwater input and seawater intrusion. However, little is known about how clonal plant populations adapt to heterogeneous salinity in soil environments. In the present study, the effects of clonal integration on Phragmites australis populations under salinity heterogeneity were studied using field experiments with 10 treatments in the Yellow River Delta. Clonal integration significantly increased plant height, aboveground biomass, underground biomass, root–shoot ratio, intercellular CO2 concentration, net photosynthetic rate, stomatal conductance, transpiration rate, and stem Na+ content under homogeneous treatment. Under the heterogeneous salt treatment, clonal integration significantly affected total aboveground and underground biomass, photosynthetic traits, and stem Na+ content under different salt gradients. The increase in salt concentration inhibited the physiological activity and growth of P. australis to varying degrees. Compared with the heterogeneous saline environment, clonal integration was more beneficial to P. australis populations in the homogeneous saline habitat. The results of the present study suggest that P. australis prefers homogeneous saline habitats; however, plants can adapt to heterogeneous salinity conditions via clonal integration

Calcium Supplementation Enhanced Adipogenesis and Improved Glucose Homeostasis Through Activation of Camkii and PI3K/Akt Signaling Pathway in Porcine Bone Marrow Mesenchymal Stem Cells (pBMSCs) and Mice Fed High Fat Diet (HFD)

Background/Aims: It has been implicated that calcium supplementation is involved in reducing body weight/fat and improving glucose homeostasis. However, the underlying mechanisms are still not fully understood. Here, we investigated the effects of calcium supplementation on adipogenesis and glucose homeostasis in porcine bone marrow mesenchymal stem cells (pBMSCs) and high fat diet (HFD)-fed mice and explored the involved signaling pathways. Methods: In vitro, pBMSCs were treated with 4 mM extracellular calcium ([Ca2+]o) and/or 1 μM nifedipine, 0.1 μM BAPTA-AM, 1 μM KN-93, 50 nM wortmannin for 10 days. The intracellular calcium ([Ca2+]i) levels were measured using Fluo 3-AM by flow cytometry. The adipogenic differentiation of pBMSCs was determined by Oil Red-O staining and triglyceride assay. The expression of marker genes involved in adipogenesis (peroxisome proliferator activated receptor γ (PPARγ) and CCAAT/enhancer binding protein α (C/EBPα)) and glucose uptake (glucose transporter 4 (GLUT4)), as well as the activation of Ca2+/calmodulin-dependent protein kinase II (CaMKII) and PI3K/Akt-FoxO1/AS160 signaling pathways were determined by Western blotting. Glucose uptake and utilization were examined using 2-NBDG assay and glucose content assay, respectively. In vivo, C57BL/6J male mice were fed a HFD (containing 1.2% calcium) without or with 0.6% (w/w) calcium chloride in drinking water for 13 weeks. The adipogenesis, glucose homeostasis and the involvement of CaMKII and PI3K/Akt signaling pathway were also assessed. Results: In vitro, [Ca2+]o stimulated pBMSCs adipogenesis by increasing [Ca2+]i level and activating CaMKII and PI3K/Akt-FoxO1 pathways. In addition, [Ca2+]o promoted glucose uptake/utilization by enhancing AS160 phosphorylation, GLUT4 expression and translocation. However, the stimulating effects of [Ca2+]o on pBMSCs adipogenesis and glucose uptake/utilization were abolished by L-VGCC blocker Nifedipine, [Ca2+]i chelator BAPTA-AM, CaMKII inhibitor KN-93, or PI3K inhibitor Wortmannin. In vivo, calcium supplementation decreased body weight and fat content, increased adipocyte number, and improved glucose homeostasis, with elevated PPARγ and GLUT4 expression and PI3K/Akt activation in iWAT. Conclusion: calcium supplementation enhanced adipogenesis and glucose uptake in pBMSCs, which was coincident with the increased adipocyte number and improved glucose homeostasis in HFD-fed mice, and was associated with activation of CaMKII and PI3K/Akt-FoxO1/AS160 pathways. These data provided a broader understanding of the mechanisms underlying calcium-induced body weight/fat loss and glycemic control

FREE VIBRATION ANALYSIS OF ARBITRARY SHAPED PLATES BY BOUNDARY KNOT METHOD

The boundary knot method (BKM) is a truly meshless boundary-type radial basis function (RBF) collocation scheme, where the general solution is employed instead of the fundamental solution to avoid the fictitious outside boundary of the physical domain of interest. In this study, the BKM is first used to calculate the free vibration of free and simply-supported thin plates. Compared with the analytical solution and ANSYS (a commercial FEM code) results, the present BKM is highly accurate and fast convergent

Multiobjective Optimization of 6-DOF Parallel Manipulator for Desired Total Orientation Workspace

A desired total orientation workspace for a parallel manipulator is usually an essential requirement in a practical application. At present, for the multiobjective optimization method of 6-DOF parallel manipulator for desired total orientation workspace, it is needed to predefine maximal and minimal lengths of the legs to serve as the constraint, and then the numerical method is used to solve the length of the legs and judge whether the solved maximal and minimal leg lengths meet the constraint. Predefining maximal and minimal length of the legs limits of the optimal range, the numerical method has heavy calculation burden and low calculating accuracy. In this paper, a hybrid method for solving the maximal and minimal lengths of the legs of 6-DOF parallel manipulator with desired total orientation workspace is proposed, and the actuator stroke length is calculated according to the maximal and minimal leg lengths. By judging whether the actuator stroke length can be solved to serve as the constraint, without the predefined maximal and minimal leg lengths to serve as the constraint, the optimal range is enlarged. Aiming at the physical size of the parallel manipulator and the proposed desired workspace condition index (DWCI), the optimization of the geometric parameters of the parallel manipulator is conducted based on the multiobjective optimization algorithm (NSGA-II), which is subject to the actuator stroke length. Stewart platform is set as the example; the geometric parameters of the platform whose workspace contains the desired total orientation workspace are optimized and the hybrid method is proved to be more accurate and efficient compared to the traditional numerical method. This method provides the optimization guidance for engineering designers to design the parallel manipulator for desired total orientation workspace

Unsharp Mask Guided Filtering for Acoustic Point Cloud of Water-Conveyance Tunnel

The inner-surface damage of water conveyance tunnels is the main hidden danger that threatens their safety and leads to serious accidents. The method based on the principle of acoustic reflection is the main means of inspecting damage to water-conveyance tunnels. However, affected by the tunnel environment and equipment noise, the obtained acoustic point cloud model inevitably suffers from noise, which can produce erroneous results. Therefore, we proposed a novel filtering method, called unsharp-mask-guided filtering for 3D point cloud, to reduce the impact of noise on the acoustic point cloud model of water-conveyance tunnels. The proposed method fuses the ideas of guided filtering and the unsharp masking technique and extends them to the 3D point cloud model by considering the position of the point. In addition, edge-aware weighting mean is also used to retain the edge features of the point cloud model while smoothing the noise points. The experimental results show that our method can obtain impressive results and a better performance in both the acoustic point cloud model of the tunnel and the simulated point cloud model than many state-of-the-art methods

Influence of Underlying Surface on Distribution of Hourly Heavy Rainfall over the Middle Yangtze River Valley

The variation of boundary layer circulation caused by the influence of complex underlying surface is one of the reasons why it is difficult to forecast hourly heavy rainfall (HHR) in the middle Yangtze River Valley (YRV). Based on the statistics of high-resolution observation data, it is found that the low resolution data underestimate the frequency of HHR in the mountain that are between the twain-lake basins in the middle YRV (TLB-YRV). The HHR frequency of mountainous area in the TLB-YRV is much higher than that of Dongting Lake on its left and is equivalent to the HHR frequency of Poyang Lake on its right. The hourly reanalysis data of ERA5 were used to study the variation of boundary layer circulation when HHR occurred. It can be found that the boundary layer circulation corresponding to different underlying surfaces changed under the influence of the weather system. Firstly, the strengthening of the weather system in the early morning resulted in the strengthening of the southwest low-level air flow, which intensified the uplift of the windward slope air flow on the west and south slopes of the mountainous areas in the TLB-YRV. As a result, the sunrise HHR gradually increases from the foot of the mountain. The high-frequency HHR period of sunrise occurs when the supergeostrophic effect is weakened, the low-level vorticity and frontal forcing are strengthened, and the water vapor flux convergence begins to weaken. Secondly, the high-frequency HHR period of the sunset is caused by stronger local uplift and more unstable atmospheric stratification, but the enhanced local uplift is caused by the coupling of the terrain forcing of the underlying surface and the enhanced northern subgeostrophic flow, which causes the HHR to start closer to the mountain top at sunset than at sunrise