Mid-infrared Spectral Compression of Soliton Pulse in an Adiabatically Suspended Silicon Waveguide Taper

Spectral compression (SPC) can be used for generating narrow bandwidth and wavelength-tunable light sources, which have important applications in optical communication system, spectroscopy, and nonlinear microscopy. In this paper, we numerically demonstrate the high-degree SPC of the chirp-free femtosecond pulse at wavelength 2.4 μm in a 6-cm long adiabatically suspended silicon waveguide taper. The silicon waveguide taper is designed with a dispersion-increasing profile along the propagation distance z. Simulation results show that the SPC factor can be up to 10.9, along with the brightness-enhanced factor of 8.0 and negligible sidelobe. The impacts of the higher-order dispersion, higher-order nonlinearity, losses (including linear and nonlinear loss), and variation of Kerr nonlinear coefficient along z on the SPC are also investigated. It is found that variation of Kerr nonlinear coefficient γ(z) and linear loss are the dominant perturbation to the degradation of the SPC performance

Efficient spectral compression of wavelength-shifting soliton and its application in integratable all-optical quantization

In this paper, we numerically demonstrate efficient spectral compression (SPC) of wavelength-shifting soliton in a chalcogenide strip waveguide. It is found that the profiles of group-velocity dispersion (GVD) and Kerr nonlinearity play key roles in determining SPC. After calculating the dispersion of Kerr nonlinearity and Raman spectrum for three kinds of chalcogenide materials, Ge11.5As24Se64.5 is chosen as the material for designing the chalcogenide strip waveguide (CSW). The geometric parameters of CSW are optimized to obtain the desired GVD and Kerr nonlinearity. Simulation results show that in the designed CSW, an input spectrum width of 52.04 nm can be compressed to 7.23 nm along with wavelength shift of 17 nm when the input peak power is 25 W. With the input peak power increasing to 75 W, the SPC is slightly weakened, but wavelength shift can be up to 190 nm. The proposed CSW is applied to integrated all-optical quantization and an effective quantization number of 3.66-bit is achieved. It is expected that our research results can find important applications in on-chip integrated spectroscopy, all-optical signal processing, etc

Investigation of Humidity and Temperature Response of a Silica Gel Coated Microfiber Coupler

The humidity and temperature responses of a microfiber coupler (MFC) coated with silica gel are investigated. Two MFC structures with different waist diameters of 2.5 and 3.5 μm were fabricated by fusing and tapering two single-mode fibers using a microheater brushing technique. The influences of the coating thickness and tapered waist diameter on the sensing performance are analyzed. For the proposed sensor with a waist diameter of 2.5 μm and 8-layers thick coating, the change in the relative humidity (RH) results in an exponential blueshift with a maximum sensitivity of 1.6 nm/% RH in the range from 70 to 86% RH. In response to the temperature change, the sensor's transmission spectrum redshifts in a linear fashion with an average sensitivity of 0.55 nm/°C in the range from 20 to 40 °C. The study is important for the development of the proposed fiber structure as a humidity or temperature sensor

High sensitivity ammonia gas sensor based on a silica gel coated microfiber coupler

In this paper, a high sensitivity ammonia gas sensor is proposed based on a silica gel coated microfiber coupler (MFC). The MFC structure is formed by the two tapered fibers with 3 μm waist diameter each, which were fabricated by using a customized microheater brushing technique. Silica gel coating was prepared by a sol-gel technique and applied on the surface of the MFC as a thin layer. The spectral characteristics of the proposed sensor were studied under various ammonia gas concentrations. The experimental results show that the coating thickness strongly affected the sensitivity of the MFC-based sensor to ammonia gas concentration. For the sensor with a 90 nm silica gel coating thickness, the highest measurement sensitivity is 2.23 nm/ppm for ammonia gas concentration, and the resolution is as good as 5 ppb, while the measured response and recovery times are ~ 50 and 35 seconds, respectively. Finally, it is demonstrated that the proposed sensor offers good repeatability and selectivity to ammonia gas

High Degree Picosecond Pulse Compression in Chalcogenide-Silicon Slot Waveguide Taper

In this paper, we propose and design a chalcogenide (As2S3)-based slot waveguide taper with exponentially decreasing dispersion profile to realize high-degree pulse compression of low-power chirped solitons. Based on the waveguide taper designed, pulse compression of fundamental solitons, and chirped 2-soliton breather are both investigated numerically. With self-similar pulse compression scheme, a 1 ps input pulse is compressed to 81.5 fs in 6 cm propagation. By using 2-soliton breather pulses, a 1 ps chirped pulse is compressed to 80.3 fs in just 2.54 cm. This is the first demonstration of the feasibility of high-degree nonlinear pulse compression in As2S3-based slot waveguide taper

Microdisk Resonator With Negative Thermal Optical Coefficient Polymer for Refractive Index Sensing With Thermal Stability

In this paper, we propose a microdisk resonator with negative thermal optical coefficient (TOC) polymer for refractive index (RI) sensing with thermal stability. The transmission characteristics and sensing performances by using quasi-TE01 and quasi-TM01 modes are simulated by a three-dimensional finite element method. The influences of the TOC, RI, and thickness of the polymer on the sensing performances are also investigated. The simulation results show that the RI sensitivity Sn and temperature sensitivity ST with different polymers are in the ranges of 25.1-26 nm/RIU and 67.3-75.2 pm/K for the quasi-TE01 mode, and 94.5-110.6 nm/RIU and 1.2-51.3 pm/K for the quasi-TM01 mode, respectively. Moreover, figure-of-merit of the temperature sensing for the quasi-TM01 mode is in the range of 2 × 10-4-8 × 10-3, which can find important application in the implementation of the adiabatic devices

Comprehensive analysis of passive generation of parabolic similaritons in tapered hydrogenated amorphous silicon photonic wires

Parabolic pulses have important applications in both basic and applied sciences, such as high power optical amplification, optical communications, all-optical signal processing, etc. The generation of parabolic similaritons in tapered hydrogenated amorphous silicon photonic wires at telecom (λ~1550 nm) and mid-IR (λ≥2100 nm) wavelengths is demonstrated and analyzed. The self-similar theory of parabolic pulse generation in passive waveguides with increasing nonlinearity is presented. A generalized nonlinear Schrödinger equation is used to describe the coupled dynamics of optical field in the tapered hydrogenated amorphous silicon photonic wires with either decreasing dispersion or increasing nonlinearity. The impacts of length dependent higher-order effects, linear and nonlinear losses including two-photon absorption, and photongenerated free carriers, on the pulse evolutions are characterized. Numerical simulations show that initial Gaussian pulses will evolve into the parabolic pulses in the waveguide taper designed

Self-similar Pcosecond Pulse Compression for Supercontinuum Generation at Mid-infrared Wavelength in Silicon Strip Waveguides

Self-similar pulse compression has important application in highly coherent supercontinuum (SC) generation. In this paper, we numerically present the mid-infrared self-similar picosecond pulse compression in a tapered suspended silicon strip waveguide, which is designed with exponentially decreasing dispersion profile along the direction of propagation. When the variation of the Kerr nonlinear coefficient ��(z), linear and nonlinear losses, higher-order nonlinearity, and higher-order dispersion are taken into consideration, the simulation result shows that a 1 ps input pulse centered at wavelength 2.8 μm could be self-similarly compressed to 47.06 fs in a 3.9-cm waveguide taper, along with a compression factor ��c of 21.25, quality factor ��c of 0.78, and negligible pedestal. After that, the compressed pulse is launched into a uniform silicon strip waveguide, which is used for the generation of SC. We numerically demonstrate that the coherence of the generated SC by the compressed pulse can be significantly improved when compared to that generated directly by the picosecond pulse. The simulation results can be used to realize on-chip mid-infrared femtosecond light source and highly coherent supercontinuum, which can promote the development of on-chip nonlinear optic

Mid-Infrared Self-Similar Pulse Compression in a Tapered Tellurite Photonic Crystal Fiber and Its Application in Supercontinuum Generation

In this paper, we design a tapered tellurite photonic crystal fiber (TTPCF) with nonlinear coefficient increasing along the propagation direction, and demonstrate the mid-infrared self-similar pulse compression of the fundamental soliton in such a TTPCF. When the variation of group-velocity dispersion, higher-order dispersion, higher-order nonlinearity, and linear loss are considered, a 1 ps pulse at wavelength 2.5 μm can be compressed to 62.16 fs after a 1.63-m long propagation, along with the negligible pedestal, compression factor Fc of 16.09, and quality factor Qc of 83.16%. Then the compressed pulse is launched into another uniform tellurite PCF, where highly coherent and octave-spanning supercontinuum (SC) is generated. Compared to the initial picosecond pulse, the compressed pulse has much larger tolerance of noise level for the SC generation. Our research results provide a promising solution to realize the fiber-based mid-infrared femtosecond pulse source for nonlinear photonics and spectroscopy

Mid-infrared Self-Similar Pulse Compression in a Tapered Tellurite Photonic Crystal Fiber and Its Application in Supercontinuum Generation

In this paper, we design a tapered tellurite photonic crystal fiber (TTPCF) with nonlinear coefficient increasing along the propagation direction, and demonstrate the mid-infrared self-similar pulse compression of the fundamental soliton in such a TTPCF. When the variation of group-velocity dispersion, higher-order dispersion, higher-order nonlinearity, and linear loss are considered, a 1 ps pulse at wavelength 2.5 μm can be compressed to 62.16 fs after a 1.63-m long propagation, along with the negligible pedestal, compression factor Fc of 16.09, and quality factor Qc of 83.16%. Then the compressed pulse is launched into another uniform tellurite PCF designed, and highly coherent and octave-spanning supercontinuum (SC) is generated. Compared to the initial picosecond pulse, the compressed pulse has much larger tolerance of noise level for the SC generation. Our research results provide a promising solution to realize the fiber-based mid-infrared femtosecond pulse source for nonlinear photonics and spectroscopy