Use of FBG optical sensors for structural health monitoring: Practical application

This paper describes the development of FBG Optical sensors for their practical application on structural health monitoring. The sensors were installed on the Tsing Ma Bridge for a trial run. The results using FBG sensors were in excellent agreement with those acquired by the bridge WASHMS

The quasi-one-dimensional character of spin waves in K2Fe7Se8

published_or_final_versio

Excellent buffer layer for growing high-quality Y-Ba-Cu-O thin films

Eu2CuO4 (ECO) has been used as a buffer layer for growing of YBa2Cu3O7-ä (YBCO) thin films on SrTiO3(100) and Y-stabilized ZrO2(100) substrates. The epitaxy, crystallinity, and surface of YBCO thin films have been significantly improved by using ECO buffer layer as investigated by x-ray diffraction, rocking curves, scanning electron microscope, surface step profiler, and x-ray small-angle reflection. The best value of the full width at half-maximum of the YBCO(005) peak can be greatly reduced down to less than 0.1°. The scanning-electron-microscope photos indicate a very smooth surface for the YBCO thin films. The average roughness is less than 5 nm over a wide scanning region of 2000 ìm. The results of x-ray small-angle reflection indicate a very clear and flat interface between YBCO and ECO layers. Meanwhile, the resistivity of ECO is about 20 times higher than that of PrBa2Cu3Oy at the boiling point of liquid nitrogen. Our results suggest that ECO should be a good barrier candidate for fabricating high-Tc superconductor junctions.published_or_final_versio

Association between habenula dysfunction and motivational symptoms in unmedicated major depressive disorder

The lateral habenula plays a central role in reward and punishment processing and has been suggested to drive the cardinal symptom of anhedonia in depression. This hypothesis is largely based on observations of habenula hypermetabolism in animal models of depression, but the activity of habenula and its relationship with clinical symptoms in patients with depression remains unclear. High-resolution functional magnetic resonance imaging (fMRI) and computational modelling were used to investigate the activity of the habenula during a probabilistic reinforcement learning task with rewarding and punishing outcomes in 21 unmedicated patients with major depression and 17 healthy participants. High-resolution anatomical scans were also acquired to assess group differences in habenula volume. Healthy individuals displayed the expected activation in the left habenula during receipt of punishment and this pattern was confirmed in the computational analysis of prediction error processing. In depressed patients, there was a trend towards attenuated left habenula activation to punishment, while greater left habenula activation was associated with more severe depressive symptoms and anhedonia. We also identified greater habenula volume in patients with depression, which was associated with anhedonic symptoms. Habenula dysfunction may contribute to abnormal response to punishment in patients with depression, and symptoms such as anhedonia

Determination of selected antibiotics in the Victoria Harbour and the Pearl River, South China using high-performance liquid chromatography-electrospray ionization tandem mass spectrometry

2006-2007 > Academic research: refereed > Publication in refereed journalAccepted ManuscriptPublishe

A small synthetic molecule functions as a chloride–bicarbonate dual-transporter and induces chloride secretion in cells

A C2 symmetric small molecule composed of L-phenylalanine and isophthalamide was found to function as a Cl−/HCO3− dual transporter and self-assemble into chloride channels. In Ussing-chamber based short-circuit current measurements, this molecule elicited chloride-dependent short-circuit current (Isc) increase in both Calu-3 cell and CFBE41o-cell (with F508del mutant CFTR) monolayers.postprin

Controlling and modelling the wetting properties of III-V semiconductor surfaces using re-entrant nanostructures

Inorganic semiconductors such as III-V materials are very important in our everyday life as they are used for manufacturing optoelectronic and microelectronic components with important applications span from energy harvesting to telecommunications. In some applications, these components are required to operate in harsh environments. In these cases, having waterproofng capability is essential. Here we demonstrate design and control of the wettability of indium phosphide based multilayer material (InP/InGaAs/InP) using re-entrant structures fabricated by a fast electron beam lithography technique. This patterning technique enabled us to fabricate highly uniform nanostructure arrays with at least one order of magnitude shorter patterning times compared to conventional electron beam lithography methods. We reduced the surface contact fraction signifcantly such that the water droplets may be completely removed from our nanostructured surface. We predicted the wettability of our patterned surface by modelling the adhesion energies between the water droplet and both the patterned surface and the dispensing needle. This is very useful for the development of coating-free waterproof optoelectronic and microelectronic components where the coating may hinder the performance of such devices and cause problems with semiconductor fabrication compatibility

Factors controlling tropospheric O3, OH, NOx, and SO2 over the tropical Pacific during PEM-Tropics B

Observations over the tropical Pacific during the Pacific Exploratory Mission (PEM)-Tropics B experiment (March-April 1999) are analyzed. Concentrations of CO and long-lived nonmethane hydrocarbons in the region are significantly enhanced due to transport of pollutants from northern industrial continents. This pollutant import also enhances moderately O3 concentrations but not NOx concentrations. It therefore tends to depress OH concentrations over the tropical Pacific. These effects contrast to the large enhancements of O3 and NOx concentrations and the moderate increase of OH concentrations due to biomass burning outflow during the PEM-Tropics A experiment (September-October 1996). Observed CH3I concentrations, as in PEM-Tropics A, indicate that convective mass outflux in the middle and upper troposphere is largely independent of altitude over the tropical Pacific. Constraining a one-dimensiohal model with CH3I observations yields a 10-day timescale for convective turnover of the free troposphere, a factor of 2 faster than during PEM-Tropics A. Model simulated HO2, CH2O, H2O2, and CH3OOH concentrations are generally in agreement with observations. However, simulated OH concentrations are lower (∼25%) than observations above 6 km. Whereas models tend to overestimate previous field measurements, simulated HNO3 concentrations during PEM-Tropics B are too low (a factor of 2-4 below 6 km) compared to observations. Budget analyses indicate that chemical production of O3 accounts for only 50% of chemical loss; significant transport of O3 into the region appears to take place within the tropics. Convective transport of CH3OOH enhances the production of HOx and O3 in the upper troposphere, but this effect is offset by HOx loss due to the scavenging of H2O2. Convective transport and scavenging of reactive nitrogen species imply a necessary source of 0.4-1 Tg yr-1 of NOx in the free troposphere (above 4 km) over the tropics. A large fraction of the source could be from marine lightning. Oxidation of DMS transported by convection from the boundary layer could explain the observed free tropospheric SO2 concentrations over the tropical Pacific. This source of DMS due to convection, however, would imply in the model free tropospheric concentrations much higher than observed. The model overestimate cannot be reconciled using recent kinetics measurements of the DMS-OH adduct reaction at low pressures and temperatures and may reflect enhanced OH oxidation of DMS during convection. Copyright 2001 by the American Geophysical Union

An illumination-invariant phase-shifting algorithm for three-dimensional profilometry

Image Processing: Machine Vision Applications V, Burlingame, California, USA, 22 January, 2012Uneven illumination is a common problem in real optical systems for machine vision applications, and it contributes significant errors when using phase-shifting algorithms (PSA) to reconstruct the surface of a moving object. Here, we propose an illumination-reflectivity-focus (IRF) model to characterize this uneven illumination effect on phase-measuring profilometry. With this model, we separate the illumination factor effectively, and then formulate the phase reconstruction as an optimization problem. To simplify the optimization process, we calibrate the uneven illumination distribution beforehand, and then use the calibrated illumination information during surface profilometry. After calibration, the degrees of freedom are reduced. Accordingly, we develop a novel illumination-invariant phase-shifting algorithm (II-PSA) to reconstruct the surface of a moving object under an uneven illumination environment. Experimental results show that the proposed algorithm can improve the reconstruction quality both visually and numerically. Therefore, using this IRF model and the corresponding II-PSA, not only can we handle uneven illumination in a real optical system with a large field of view (FOV), but we also develop a robust and efficient method for reconstructing the surface of a moving object. © 2012 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).link_to_subscribed_fulltextpublished_or_final_versio