Infrared Optical Properties of Amorphous and Nanocrystalline Ta2O5 Thin Films

The optical constants of tantalum pentoxide (Ta 2O5) are determined in a broad spectral region from the visible to the far infrared. Ta 2O5 films of various thicknesses from approximately 170 to 1600 nm aredeposited using reactive magnetron sputtering on Si substrates. X-ray diffraction shows that the as-deposited films are amorphous, and annealing in air at 800 °C results in the formation of nanocrystallineTa 2O5. Ellipsometry is used to obtain the dispersion in the visible and near-infrared. Two Fourier-transform infrared spectrometers are used to measure the transmittance and reflectance at wavelengths from 1 to 1000 μm. The surface topography and microstructure of the samples are examined using atomic force microscopy, confocal microscopy, and scanning electron microscopy. Classical Lorentz oscillatorsare employed to model the absorption bands due to phonons and impurities. A simple model is introduced to account for light scattering in the annealed films, which contain micro-cracks. For the unannealed samples, an effective-medium approximation is used to take into account the adsorbed moisture in the film and a Drude free-electron term is also added to model the broad background absorption

A preliminary study in Wistar rats with enniatin : A contaminated feed

A 28-day repeated dose preliminary assay, using enniatin A naturally contaminated feed through microbial fermentation by a Fusarium tricinctum strain, was carried out employing two months-old female Wistar rats as in vivo experimental model. In order to simulate a physiological test of a toxic compound naturally produced by fungi, five treated animals were fed during twenty-eight days with fermented feed. As control group, five rats were fed with standard feed. At the 28th day, blood samples were collected for biochemical analysis and the gastrointestinal tract, liver and kidneys were removed from each rat for enniatin A detection and quantitation. Digesta were collected from stomach, duodenum, jejunum, ileum and colon. Enniatin A present in organs and in biological fluids was analyzed by liquid chromatography-diode array detector (LC-DAD) and confirmed by LC-mass spectrometry linear ion trap (MS-LIT); also several serum biochemical parameters and a histological analysis of the duodenal tract were performed. No adverse effects were found in any treated rat at the enniatin A concentration (20.91 mg/kg bw/day) tested during the 28-day experiment. Enniatin A quantitation in biological fluids ranged from 1.50 to 9.00 mg/kg, whereas in the gastrointestinal organs the enniatin A concentration ranged from 2.50 to 23.00 mg/kg. The high enniatin A concentration found in jejunum liquid and tissue points to them as an absorption area. Finally, two enniatin A degradation products were identified in duodenum, jejunum and colon content, probably produced by gut microflora

Design and Synthesis of High Affinity Inhibitors of Plasmodium falciparum and Plasmodium vivax N-Myristoyltransferases Directed by Ligand Efficiency Dependent Lipophilicity (LELP)

N-Myristoyltransferase (NMT) is an essential eukaryotic enzyme and an attractive drug target in parasitic infections such as malaria. We have previously reported that 2-(3-(piperidin-4-yloxy)benzo[b]thiophen-2-yl)-5-((1,3,5-trimethyl-1H-pyrazol-4-yl)methyl)-1,3,4-oxadiazole (34c) is a high affinity inhibitor of both Plasmodium falciparum and P. vivax NMT and displays activity in vivo against a rodent malaria model. Here we describe the discovery of 34c through optimization of a previously described series. Development, guided by targeting a ligand efficiency dependent lipophilicity (LELP) score of less than 10, yielded a 100-fold increase in enzyme affinity and a 100-fold drop in lipophilicity with the addition of only two heavy atoms. 34c was found to be equipotent on chloroquine-sensitive and -resistant cell lines and on both blood and liver stage forms of the parasite. These data further validate NMT as an exciting drug target in malaria and support 34c as an attractive tool for further optimization

Sub-lethal concentrations of CdCl2 disrupt cell migration and cytoskeletal proteins in cultured mouse TM4 Sertoli cells

The aims of this study were to examine the effects of CdCl2 on the viability, migration and cytoskeleton of cultured mouse TM4 Sertoli cells. Time- and concentration-dependent changes were exhibited by the cells but 1 µM CdCl2 was sub-cytotoxic at all time-points. Exposure to 1 and 12 µM CdCl2 for 4 h resulted in disruption of the leading edge, as determined by chemical staining. Cell migration was inhibited by both 1 and 12 µM CdCl2 in a scratch assay monitored by live cell imaging, although exposure to the higher concentration was associated with cell death. Western blotting and immunofluorescence staining indicated that CdCl2 caused a concentration dependent reduction in actin and tubulin levels. Exposure to Cd2+ also resulted in significant changes in the levels and/or phosphorylation status of the microtubule and microfilament destabilising proteins cofilin and stathmin, suggesting disruption of cytoskeletal dynamics. Given that 1-12 µM Cd2+ is attainable in vivo, our findings are consistent with the possibility that Cd2+ induced impairment of testicular development and reproductive health may involve a combination of reduced Sertoli cell migration and impaired Sertoli cell viability depending on the timing, level and duration of exposure

Evaluation of An Eddy-Current Tape-Head Probe

The objective of this task is to evaluate and characterize a new type of eddy-current probe that is based on ferrite tape-head technology. Preliminary tests were conducted last year at 100 kHz using modified, commercially available floppy-disk tape heads and subassemblies. Some customized probes also were constructed for SRI by a tape-head manufacturer. These customized probes were made of ferrite material available at the manufacturer’s facility; however, this material subsequently was found to be too lossy for the eddy-current application. Nevertheless, test results obtained using the floppy-disk tape-head probes proved to be very promising from the standpoint of sensitivity, lift-off discrimination, and the ability of this type of probe to detect cracks inside and at the edges of holes.</p

Evaluation of an Eddy-Current Tape-Head Probe

SRI International is performing basic evaluation and characterization of eddy-current probes that are fabricated using ferrite tape-head technology. Tests conducted during the previous two years using both absolute and differential probes, frequencies of 100 kHz and 1 MHz, and flat-plate samples made of aluminum and titanium demonstrated that such probes exhibit both high sensitivity to surface cracks and high spatial resolution.1,2 To round out this evaluation, during the past year we studied tape-head reflection probes and measured their characteristics over a broad range of frequencies. This paper discusses reflection probes briefly and presents the results of comparative tests that were made using tape-head and coil-type reflection probes in conjunction with a commercial eddy-current instrument.</p

Evaluation of a Novel Eddy-Current Probe for Detecting Cracks Inside and at the Edges of Holes

Preliminary studies performed during a previous investigation at SRI showed that a modified floppy-disk tape head operating at 100 kHz is a very sensitive crack detector. For example, tests on 0.25-in.-long fatigue cracks in aluminum produced signals an order of magnitude larger than those obtained using a commercial 100-kHz coil probe. The floppy-disk probe contains ferrite material, but its construction is different from other ferrite-containing eddy-current probes.</p