Evaluation of Stress Corrosion Cracking Susceptibility Using Fracture Mechanics Techniques, Part 1

Stress corrosion cracking (SSC) tests were performed on 13 aluminum alloys, 13 precipitation hardening stainless steels, and two titanium 6Al-4V alloy forgings to compare fracture mechanics techniques with the conventional smooth specimen procedures. Commercially fabricated plate and rolled or forged bars 2 to 2.5-in. thick were tested. Exposures were conducted outdoors in a seacoast atmosphere and in an inland industrial atmosphere to relate the accelerated tests with service type environments. With the fracture mechanics technique tests were made chiefly on bolt loaded fatigue precracked compact tension specimens of the type used for plane-strain fracture toughness tests. Additional tests of the aluminum alloy were performed on ring loaded compact tension specimens and on bolt loaded double cantilever beams. For the smooth specimen procedure 0.125-in. dia. tensile specimens were loaded axially in constant deformation type frames. For both aluminum and steel alloys comparative SCC growth rates obtained from tests of precracked specimens provide an additional useful characterization of the SCC behavior of an alloy

Invertible Dirac operators and handle attachments on manifolds with boundary

For spin manifolds with boundary we consider Riemannian metrics which are product near the boundary and are such that the corresponding Dirac operator is invertible when half-infinite cylinders are attached at the boundary. The main result of this paper is that these properties of a metric can be preserved when the metric is extended over a handle of codimension at least two attached at the boundary. Applications of this result include the construction of non-isotopic metrics with invertible Dirac operator, and a concordance existence and classification theorem.Comment: Accepted for publication in Journal of Topology and Analysi

Interviewing suspects: examining the association between skills, questioning, evidence disclosure, and interview outcomes

The interviewing of suspects is an important element in the investigation of crime. However, studies concerning actual performance of investigators when undertaking such interviews remain sparse. Nevertheless, in England and Wales, since the introduction of a prescribed framework over 20 years ago, field studies have generally shown an improvement in interviewing performance, notwithstanding ongoing concerns largely relating to the more demanding aspects (such as building/maintaining rapport, intermittent summarising and the logical development of topics). Using a sample of 70 real-life interviews, the present study examined questioning and various evidence disclosure strategies (which have also been found demanding), examining their relationships between interview skills and interview outcomes. It was found that when evidence was disclosed gradually (but revealed later), interviews were generally both more skilled and involved the gaining of comprehensive accounts, whereas when evidence was disclosed either early or very late, interviews were found to be both less skilled and less likely to involve this outcome. These findings contribute towards an increased research base for the prescribed framework

Tunable Resonant Raman Scattering from Singly Resonant Single Wall Carbon Nanotubes

We perform tunable resonant Raman scattering on 17 semiconducting and 7 metallic singly resonant single wall carbon nanotubes. The measured scattering cross-section as a function laser energy provides information about a tube's electronic structure, the lifetime of intermediate states involved in the scattering process and also energies of zone center optical phonons. Recording the scattered Raman signal as a function of tube location in the microscope focal plane allows us to construct two-dimensional spatial maps of singly resonant tubes. We also describe a spectral nanoscale artifact we have coined the "nano-slit effect"

Space station automation of common module power management and distribution

The purpose is to automate a breadboard level Power Management and Distribution (PMAD) system which possesses many functional characteristics of a specified Space Station power system. The automation system was built upon 20 kHz ac source with redundancy of the power buses. There are two power distribution control units which furnish power to six load centers which in turn enable load circuits based upon a system generated schedule. The progress in building this specified autonomous system is described. Automation of Space Station Module PMAD was accomplished by segmenting the complete task in the following four independent tasks: (1) develop a detailed approach for PMAD automation; (2) define the software and hardware elements of automation; (3) develop the automation system for the PMAD breadboard; and (4) select an appropriate host processing environment

Beneficial hemodynamic effects of intravenous and oral diltiazem in severe congestive heart failure

Concern persists about the potential negative inotropic effects of calcium channel blockers in patients with severely depressed myocardial function. Therefore, intravenous diltiazem (100 to 200 ltg/kg per min infusion) was administered for 40 minutes followed by oral diltiazem (90 to 120 mg/8 hours) for 24 hours to patients with advanced congestive heart failure (New York Heart Association class III to IV, mean ejection fraction 26 ± 4 [SD]). Intravenous diltiazem (eight patients) increased cardiac index 20% (2.05 ± 0.8 to 2.47 ± 0.8 liters/min per MZ, p < 0.01), stroke volume index 50% (22 ± 9 to 33 ± 12 MI/M2, p < 0.001) and stroke work index 27% (19 ± 10 to 24 ± 10 g-m/MZ, p < 0.05); while reducing heart rate 23% (97 ± 18 to 75 ± 11 beats/min, p < 0.01), mean arterial pressure 18% (95 ± 13 to 78 ± 7 mm Hg) and pulmonary wedge pressure 34% (29 ± 9 to 19 ± 7 mm Hg), without altering maximal first derivative of left ventricular pressure (dP/dtmax). Oral diltiazem (seven patients) produced equivalent hemodynamic effects. Transient junctional arrhythmias were observed in three of eight patients with intravenous diltiazem and one of seven patients with oral diltiazem.It is concluded that intravenous and short-term oral diltiazem improve left ventricular performance and reduce myocardial oxygen demand by heart rate and afterload reduction without significantly depressing contractile function in severe congestive heart failure. Caution should be exercised to avoid potential adverse, druginduced electrophysiologic effects in such patients

Argon metastable dynamics in a filamentary jet micro-discharge at atmospheric pressure

Space and time resolved concentrations of Ar ($^{3}P_2$) metastable atoms at the exit of an atmospheric pressure radio-frequency micro-plasma jet were measured using tunable diode laser absorption spectroscopy. The discharge features a coaxial geometry with a hollow capillary as an inner electrode and a ceramic tube with metal ring as outer electrode. Absorption profiles of metastable atoms as well as optical emission measurements reveal the dynamics and the filamentary structure of the discharge. The average spatial distribution of Ar metastables is characterized with and without a target in front of the jet, showing that the target potential and therewith the electric field distribution substantially changes the filaments' expansion. Together with the detailed analysis of the ignition phase and the discharge's behavior under pulsed operation, the results give an insight into the excitation and de-excitation mechanisms

Encouraging Undergraduate-Faculty Collaborative Research

This paper is the result of the authors’ participation in a panel session at the Southwest Regional Meeting of the American Accounting Association in Houston, Texas in March 2008. Robert J. Walsh presented an earlier version of this manuscript at the Northeast Regional Meeting of the American Accounting Association in Newport, Rhode Island in November 2008. The authors wish to recognize the contributions of the program chairs, anonymous reviewers, and panel session participants for their helpful comments and suggestions

Iterative techniques for the decomposition of long-slit spectra

Two iterative techniques are described for decomposing a long-slit spectrum into the individual spectra of the point sources along the slit and the spectrum of the underlying background. One technique imposes the strong constraint that the spectrum of the background is spatially-invariant; the other relaxes this constraint. Both techniques are applicable even when there are numerous overlapping point sources superposed on a structurally-complex background. The techniques are tested on simulated as well as real long-slit data from the ground and from space.Comment: Accepted by AJ. 20 pages, 4 figure

Deconstructing active region AR10961 using STEREO, HINODE, TRACE and SOHO

Active region 10961 was observed over a five day period (2007 July 2-6) by instrumentation on-board STEREO, Hinode, TRACE and SOHO. As it progressed from Sun centre to the solar limb a comprehensive analysis of the EUV, X-ray and magnetic field data reveals clearly observable changes in the global nature of the region. Temperature analyses undertaken using STEREO EUVI double filter ratios and XRT single and combined filter ratios demonstrate an overall cooling of the region from between 1.6 - 3.0 MK to 1.0 - 2.0 MK over the five days. Similarly, Hinode EIS density measurements show a corresponding increase in density of 27%. Moss, cool (1 MK) outer loop areas and hotter core loop regions were examined and compared with potential magnetic field extrapolations from SOHO MDI magnetogram data. In particular it was found that the potential field model was able to predict the structure of the hotter X-ray loops and that the larger cool loops seen in 171 Angstrom images appeared to follow the separatrix surfaces. The reasons behind the high density moss regions only observed on one side of the active region are examined further