Polarized Raman scattering and SEM combined full characterization of self-assembled nematic thin films

Elongated particles are predestined for a fast transfer of optical and electronical signals in a preferred direction, which is mandatory for a quick response in optoelectronic devices. The performance of the material is based on the quality of defect less alignment of the particles. On this account we present an easy non-invasive methodology for characterization of both surface and bulk order. The characterization of bulk order is performed by orientation dependent variation of the polarized Raman scattering signal on large areas by mapping. Scanning electron microscopy and image analysis on the surface complete the characterization. New insights in dip coated nematic structures clearly show the interplay of evaporation induced and shear-induced self-assembly and reveal a comprehensive mechanistic picture for nanorod assembly: the shear force dominated regime orients the particle in direction of withdrawal. At low withdrawal velocity, however, shear forces and evaporation counteract to produce a three-layered film where the top and bottom layers are oriented perpendicular to each other. The middle layer gives a clear evidence for a reorientation by convective flow

Targeted color design of silver–gold alloy nanoparticles

Mathematical, data-driven optimization of a green synthesis route for silver–gold alloy nanoparticles, controlling optical properties without a known formation mechanism.</jats:p

From evaporation-induced self-assembly to shear-induced alignment

The functionality of compact nanostructured thin films depends critically on the degree of order and hence on the underlying ordering mechanisms during film formation. For dip coating of rigid nanorods the counteracting mechanisms, evaporation-induced self-assembly (EISA) and shear-induced alignment (SIA) have recently been identified as competing ordering mechanisms. Here, we show how to achieve highly ordered and homogeneous thin films by controlling EISA and SIA in dip coating. Therefore we identify the influences of the process parameters including temperature, initial volume fraction and nanorod aspect ratio on evaporation-induced convective flow and externally applied shear forces and evaluate the resulting films. The impact of evaporation and shear can be distinguished by analysing film thickness, surface order and bulk order by careful in situ SAXS, Raman and SEM-based image analysis. For the first time we derive processing guidelines for the controlled application of EISA and SIA towards highly ordered thin nematic films

Investigation of the size–property relationship in CuInS2 quantum dots

In this work we investigated fundamental properties of CuInS2 quantum dots in dependence of the particle size distribution (PSD). Size-selective precipitation (SSP) with acetone as poor solvent was performed as an adequate post-processing step. Our results provide deep insight into the correlation between particle size and various optical characteristics as bandgap energy, absorption and emission features and the broadness of the emission signal. These structure–property relationships are only achieved due to the unique combination of different analytical techniques. Our study reveals that the removal of 10 wt% of smallest particles from the feed results in an enhancement of the emission signal. This improvement is ascribed to a decreased quenching of the emission in larger particles. Our results reveal the impact of PSDs on the properties and the performance of an ensemble of multicomponent QDs and anticipate the high potential of controlling PSDs by well-developed post-processing

Understanding spatial variability of soil properties: a key step in establishing field- to farm-scale agro-ecosystem experiments

PublishedNo abstract is available for this article.NERCBBSR

Improvement of polymer properties for powder bed fusion by combining in situ PECVD nanoparticle synthesis and dry coating

Abstract Polypropylene (PP) powders are coated with silica nanoparticles in a fluidized bed to improve the flow behavior of the powders and the processability in powder bed fusion. The nanoparticles are produced in situ via dusty plasma‐enhanced chemical vapor deposition (PECVD) in an atmospheric‐pressure Ar/O2 plasma jet fixed at the distributor plate of the fluidized bed. Hexamethyldisiloxane is used as a precursor of the nanoparticles. The influence of the oxygen concentration in the plasma gas and the number of treatment cycles on the chemical composition of the nanoparticles, the amount of nanoparticles deposited, and the flow properties of the coated PP powders is investigated. The chemical composition of the formed silica particles is determined by X‐ray photon spectroscopy and infrared spectroscopy. The results reveal that the composition of the nanoparticles is SiOxCy, that is, the portion of organic residues introduced by the precursor can be controlled by changing the oxygen concentration in the plasma gas. The mass of nanoparticles deposited on the polymer powder's surface, as determined by inductively coupled optical emission spectroscopy, shows a linear dependence of the number of cycles and the oxygen concentration in the plasma gas. A considerable improvement of the flow behavior of the PP powders is observed after PECVD treatment

Using carbon nanodots as inexpensive and environmentally friendly sensitizers in mesoscopic solar cells

We discuss the use of carbon nanodots (CNDs) as sensitizers in mesoscopic solar cells. The CNDs are synthesized using a one-step, bottom-up microwave approach with citric acid, urea, and formic acid as precursors in aqueous media. Their light-harvesting capabilities can be tuned by adjusting the synthetic parameters. Comprehensive spectroscopic and theoretical studies allow us to rationalize the nature of their absorption features. Promising power conversion efficiencies (η) of 0.24% can be achieved from these cheap and eco-friendly sensitizers by optimizing the solar-cell assembly process. Interestingly, we found that extending the light absorption towards longer wavelengths does not necessarily improve the performance of the solar cells, since the longer-wavelength absorption features hardly contribute to the cells' photo-action spectra, so that the overall power conversion efficiency is actually worse. The origin of the lower performance is corroborated in transient absorption spectroscopy and photovoltage decay measurements. Our work points, on one hand, to the limits of as-synthesized CNDs as photosensitizers and, on the other hand, to possible improvements