A MEMS electrostatic particle transportation system

We demonstrate here an electrostatic MEMS system capable of transporting particles 5-10μm in diameter in air. This system consists of 3-phase electrode arrays covered by insulators (Figs. 1, 2). Extensive testing of this system has been done using a variety of insulation materials (silicon nitride, photoresist, and Teflon), thickness (0- 12μm), particle sizes (1-10μm), particle materials (metal, glass, polystyrene, spores, etc), waveforms, frequencies, and voltages. Although previous literature [1-2] claimed it impractical to electrostatically transport particles with sizes 5-10μm due to complex surface forces, this effort actually shows it feasible (as high as 90% efficiency) with the optimal combination of insulation thickness, electrode geometry, and insulation material. Moreover, we suggest a qualitative theory for our particle transportation system which is consistent with our data and finite-element electrostatic simulations

Unified description of pairing, trionic and quarteting states for one-dimensional SU(4) attractive fermions

Paired states, trions and quarteting states in one-dimensional SU(4) attractive fermions are investigated via exact Bethe ansatz calculations. In particular, quantum phase transitions are identified and calculated from the quarteting phase into normal Fermi liquid, trionic states and spin-2 paired states which belong to the universality class of linear field-dependent magnetization in the vicinity of critical points. Moreover, unified exact results for the ground state energy, chemical potentials and complete phase diagrams for isospin $S=1/2, 1, 3/2$ attractive fermions with external fields are presented. Also identified are the magnetization plateaux of $m^z=M_s/3$ and $m^z=2M_s/3$, where $M_s$ is the magnetization saturation value. The universality of finite-size corrections and collective dispersion relations provides a further test ground for low energy effective field theory.Comment: 13 pages, 4 figure

A micro cell lysis device

A new micromachined cell lysis device is developed. It is designed for miniature bio-analysis systems where cell lysing is needed to obtain intracellular materials for further analysis such as DNA identification. It consists of muti-electrode pairs to apply electric fields to cells. We adopt the means of using electric field lysing because it can greatly simplify purification steps for preparation of biological samples, when compared to conventional chemical methods. Yeast, Chinese cabbage, radish cells and E. coli are tested with the device. The lysis of yeast, Chinese cabbage, radish cells is observed by a microscope. The experimental observation suggests E. coli are also lysed by the pulsed electric field. The range of electric field for the lysis is on the order of 1 kV/cm to 10 kV/cm. In addition, for practical reasons, we reduce the voltage required for lysing to less than 10 V by making the electrode gap on the order of microns

Fluctuations of Entropy Production in Partially Masked Electric Circuits: Theoretical Analysis

In this work we perform theoretical analysis about a coupled RC circuit with constant driven currents. Starting from stochastic differential equations, where voltages are subject to thermal noises, we derive time-correlation functions, steady-state distributions and transition probabilities of the system. The validity of the fluctuation theorem (FT) is examined for scenarios with complete and incomplete descriptions.Comment: 4 pages, 1 figur

Micro Balloon Actuators for Aerodynamic Control

A robust, large-force, large-deflection micro balloon actuator for aerodynamic (manoeuvring) control of transonic aircraft has been developed. Using a novel process, high yield linear arrays of silicone balloons on a robust silicon substrate have been fabricated that can deflect vertically in excess of one mm. Balloon actuators have been tested under cyclic conditions to assess reliability. The actuators have been characterized in a wind tunnel to assess their suitability as aerodynamic control surfaces and flight-tested on a jet fighter to assess their resistance to varied temperatures and pressures at high velocity

Pulsed THz radiation due to phonon-polariton effect in [110] ZnTe crystal

Pulsed terahertz (THz) radiation, generated through optical rectification (OR) by exciting [110] ZnTe crystal with ultrafast optical pulses, typically consists of only a few cycles of electromagnetic field oscillations with a duration about a couple of picoseconds. However, it is possible, under appropriate conditions, to generate a long damped oscillation tail (LDOT) following the main cycles. The LDOT can last tens of picoseconds and its Fourier transform shows a higher and narrower frequency peak than that of the main pulse. We have demonstrated that the generation of the LDOT depends on both the duration of the optical pulse and its central wavelength. Furthermore, we have also performed theoretical calculations based upon the OR effect coupled with the phonon-polariton mode of ZnTe and obtained theoretical THz waveforms in good agreement with our experimental observation.Comment: 9 pages, 5 figure