Halloysite nanotubes: Controlled access and release by smart gates

Hollow halloysite nanotubes have been used as nanocontainers for loading and for the triggered release of calcium hydroxide for paper preservation. A strategy for placing end-stoppers into the tubular nanocontainer is proposed and the sustained release from the cavity is reported. The incorporation of Ca(OH)2 into the nanotube lumen, as demonstrated using transmission electron microscopy (TEM) imaging and Energy Dispersive X-ray (EDX) mapping, retards the carbonatation, delaying the reaction with CO2 gas. This effect can be further controlled by placing the end-stoppers. The obtained material is tested for paper deacidification. We prove that adding halloysite filled with Ca(OH)2 to paper can reduce the impact of acid exposure on both the mechanical performance and pH alteration. The end-stoppers have a double effect: they preserve the calcium hydroxide from carbonation, and they prevent from the formation of highly basic pH and trigger the response to acid exposure minimizing the pH drop-down. These features are promising for a composite nanoadditive in the smart protection of cellulose-based materials. \ua9 2017 by the authors. Licensee MDPI, Basel, Switzerland

Halloysite Nanotubes: Controlled Access and Release by Smart Gates

Hollow halloysite nanotubes have been used as nanocontainers for loading and for the triggered release of calcium hydroxide for paper preservation. A strategy for placing end-stoppers into the tubular nanocontainer is proposed and the sustained release from the cavity is reported. The incorporation of Ca(OH)2 into the nanotube lumen, as demonstrated using transmission electron microscopy (TEM) imaging and Energy Dispersive X-ray (EDX) mapping, retards the carbonatation, delaying the reaction with CO2 gas. This effect can be further controlled by placing the end-stoppers. The obtained material is tested for paper deacidification. We prove that adding halloysite filled with Ca(OH)2 to paper can reduce the impact of acid exposure on both the mechanical performance and pH alteration. The end-stoppers have a double effect: they preserve the calcium hydroxide from carbonation, and they prevent from the formation of highly basic pH and trigger the response to acid exposure minimizing the pH drop-down. These features are promising for a composite nanoadditive in the smart protection of cellulose-based materials

Self-assembly of chiral fluorescent nanoparticles based on water-soluble L-tryptophan derivatives of p-tert-butylthiacalix[4]arene

New water-soluble tetra-substituted derivatives of p-tert-butylthiacalix[4]arene containing fragments of L-tryptophan in cone and 1,3-alternate conformations were obtained. It was shown that the resulting compounds form stable, positively charged aggregates of 86–134 nm in diameter in water at a concentration of 1 × 10−4 M as confirmed by dynamic light scattering, scanning electron microscopy and transmission electron microscopy. It was established that these aggregates are fluorescently active and chiral. A distinctive feature of the compounds is the pronounced dependence of their spectral (emission and chiroptical) properties on the polarity of the solvent and the length of the linker between the macrocyclic and fluorophore parts of the molecule

New Calix[4]arene—Fluoresceine Conjugate by Click Approach—Synthesis and Preparation of Photocatalytically Active Solid Lipid Nanoparticles

New fluorescent systems for photocatalysis, sensors, labeling, etc., are in great demand. Amphiphilic ones are of special interest since they can form functional colloidal systems that can be used in aqueous solutions. A new macrocycle platform for click chemistry and its adduct with o-propargylfluoresceine was synthesized and characterized using modern physical techniques. Nanosized solid lipid nanoparticles (SLNs) from the calixarene—fluoresceine adduct were synthesized through the solvent injection technique and well-characterized in the solution and in solid state using light-scattering and microscopy methods. The maximum fluorescence intensity of the SLNs was found to be in the pH range from 7 to 10. The Förster resonance energy transfer (FRET) efficiency from SLNs to rhodamine 6g was found to be 97.8%. Finally, pure SLNs and the FRET system SLNs—Rh6G were tested in model photocatalytic ipso oxidative hydroxylation of phenylboronic acid under blue LED light. The SLNs—Rh6G system was found to be the best, giving an almost qualitative phenol yield, which was shown by HPLC-UV analysis

New Calix[4]arene—Fluoresceine Conjugate by Click Approach—Synthesis and Preparation of Photocatalytically Active Solid Lipid Nanoparticles

New fluorescent systems for photocatalysis, sensors, labeling, etc., are in great demand. Amphiphilic ones are of special interest since they can form functional colloidal systems that can be used in aqueous solutions. A new macrocycle platform for click chemistry and its adduct with o-propargylfluoresceine was synthesized and characterized using modern physical techniques. Nanosized solid lipid nanoparticles (SLNs) from the calixarene—fluoresceine adduct were synthesized through the solvent injection technique and well-characterized in the solution and in solid state using light-scattering and microscopy methods. The maximum fluorescence intensity of the SLNs was found to be in the pH range from 7 to 10. The Förster resonance energy transfer (FRET) efficiency from SLNs to rhodamine 6g was found to be 97.8%. Finally, pure SLNs and the FRET system SLNs—Rh6G were tested in model photocatalytic ipso oxidative hydroxylation of phenylboronic acid under blue LED light. The SLNs—Rh6G system was found to be the best, giving an almost qualitative phenol yield, which was shown by HPLC-UV analysis

Physical Background for Luminescence Thermometry Sensors Based on Pr3+:LaF3 Crystalline Particles

The main goal of this study was creating multifunctional nanoparticles based on rare-earth doped LaF3 nanocrystals, which can be used as fluorescence thermal sensors operating over the 80–320 K temperature range including physiological temperature range (10–50°C). The Pr3+:LaF3 (CPr = 1%) microcrystalline powder and the Pr3+:LaF3 (CPr = 12%, 20%) nanoparticles were studied. It was proved that all the samples were capable of thermal sensing into the temperature range from 80 to 320 K. It was revealed that the mechanisms of temperature sensitivity for the microcrystalline powder and the nanoparticles are different. In the powder, the 3P1 and 3P0 states of Pr3+ ion share their electronic populations according to the Boltzmann and thermalization of the 3P1 state takes place. In the nanoparticles, two temperature dependent mechanisms were suggested: energy migration within 3P0 state in the temperature range from 80 K to 200 K followed by quenching of 3P0 state by OH groups at higher temperatures. The values of the relative sensitivities for the Pr3+:LaF3 (CPr = 1%) microcrystalline powder and the Pr3+:LaF3 (CPr = 12%, 20%) nanoparticles into the physiological temperature range (at 45°C) were 1, 0.5, and 0.3% °C−1, respectively

Coprecipitation Method of Synthesis, Characterization, and Cytotoxicity of Pr 3+

The Pr3+:LaF3 (CPr = 3, 7, 12, 20, 30%) nanoparticles were characterized by means of high-resolution transmission electron microscopy, X-ray diffraction, optical spectroscopy, energy dispersive X-ray spectroscopy, dynamic light scattering, and MTT assay. It was revealed that the average diameter of all the NPs is around 14–18 nm. The hydrodynamic radius of the Pr3+:LaF3 (CPr = 7%) nanoparticles strongly depends on the medium. It was revealed that hydrodynamic radii of the Pr3+:LaF3 (CPr = 7%) nanoparticles in water, DMEM, and RPMI-1640 biological mediums were 18 ± 5, 41 ± 6, and 186 ± 8 nm, respectively. The Pr3+:LaF3 (CPr = 7%) nanoparticles were nontoxic at micromolar concentrations toward COLO-320 cell line. The lifetime curves were fitted biexponentially, and for the Pr3+:LaF3 (CPr = 7%) NPs, the luminescence lifetimes of Pr3+ ions were 480 ± 2 and 53 ± 5 nanosec