1,349 research outputs found
Magneto-Electric Effects on Sr Z-type Hexaferrite at Room Temperature
In this paper, magnetoelectric effects of Sr Z-type hexaferrite,
Sr3Fe24Co2O41, at room temperature is measured. The change in remanence
magnetization was measured by applying a DC voltage or electric field across a
slab of hexaferrite. Changes of ~ 18% in remanence was observed in an electric
field of 10,000V/cm implying a similar change in the microwave permeability at
frequencies below 3GHz. Also, a change in dielectric constant at 1 GHz of ~16%
in a magnetic field of only 320 Oe was measured. In these types of measurements
high resistivity is critical in order to reduce current flow in the
hexaferrite. The resistivity of the hexaferrite was raised to 4.28x10^8 ohm-cm
by annealing under oxygen pressure. The measurements indicate that indeed
electric polarization and magnetization changes were induced by the application
of magnetic and electric fields, respectively. The implications for microwave
applications appear to be very promising at room temperature.Comment: 8 pages, 3 figures, MMM conference and Journal of applied Physic
Converse Magnetoelectric Experiments on a Room Temperature Spirally Ordered Hexaferrite
Experiments have been performed to measure magnetoelectric properties of room
temperature spirally ordered Sr3Co2Fe24O41 hexaferrite slabs. The measured
properties include the magnetic permeability, the magnetization and the strain
all as a function of the electric field E and the magnetic intensity H. The
material hexaferrite Sr3Co2Fe24O41 exhibits broken symmetries for both time
reversal and parity. The product of the two symmetries remains unbroken. This
is the central feature of these magnetoelectric materials. A simple physical
model is proposed to explain the magnetoelectric effect in these materials.Comment: 6 pages, 5 figure
Recommended from our members
Machine dependence and reproducibility for coupled climate simulations: the HadGEM3-GC3.1 CMIP Preindustrial simulation
When the same weather or climate simulation is run on different high-performance computing (HPC) platforms, model outputs may not be identical for a given initial condition. While the role of HPC platforms in delivering better climate projections is to some extent discussed in the literature, attention is mainly focused on scalability and performance rather than on the impact of machine-dependent processes on the numerical solution.
Here we investigate the behaviour of the Preindustrial (PI) simulation prepared by the UK Met Office for the forthcoming CMIP6 (Coupled Model Intercomparison Project Phase 6) under different computing environments.
Discrepancies between the means of key climate variables were analysed at different timescales, from decadal to centennial. We found that for the two simulations to be statistically indistinguishable, a 200-year averaging period must be used for the analysis of the results. Thus, constant-forcing climate simulations using the HadGEM3-GC3.1 model are reproducible on different HPC platforms provided that a sufficiently long duration of simulation is used.
In regions where El Niño–Southern Oscillation (ENSO) teleconnection patterns were detected, we found large sea surface temperature and sea ice concentration differences on centennial timescales. This indicates that a 100-year constant-forcing climate simulation may not be long enough to adequately capture the internal variability of the HadGEM3-GC3.1 model, despite this being the minimum simulation length recommended by CMIP6 protocols for many MIP (Model Intercomparison Project) experiments.
On the basis of our findings, we recommend a minimum simulation length of 200 years whenever possible
DNS of compressible multiphase flows through the Eulerian approach
In this paper we present three multiphase flow models suitable for the study
of the dynamics of compressible dispersed multiphase flows. We adopt the
Eulerian approach because we focus our attention to dispersed (concentration
smaller than 0.001) and small particles (the Stokes number has to be smaller
than 0.2). We apply these models to the compressible ()
homogeneous and isotropic decaying turbulence inside a periodic
three-dimensional box ( cells) using a numerical solver based on the
OpenFOAM C++ libraries. In order to validate our simulations in the
single-phase case we compare the energy spectrum obtained with our code with
the one computed by an eighth order scheme getting a very good result (the
relative error is very small ). Moving to the bi-phase case,
initially we insert inside the box an homogeneous distribution of particles
leaving unchanged the initial velocity field. Because of the centrifugal force,
turbulence induce particle preferential concentration and we study the
evolution of the solid-phase density. Moreover, we do an {\em a-priori} test on
the new sub-grid term of the multiphase equations comparing them with the
standard sub-grid scale term of the Navier-Stokes equations.Comment: 10 pages, 5 figures, preprint. Direct and Large Eddy Simulations 9,
201
Virtual edge illumination and one dimensional beam tracking for absorption, refraction, and scattering retrieval
We propose two different approaches to retrieve x-ray absorption, refraction, and scattering signals using a one dimensional scan and a high resolution detector. The first method can be easily implemented in existing procedures developed for edge illumination to retrieve absorption and refraction signals, giving comparable image quality while reducing exposure time and delivered dose. The second method tracks the variations of the beam intensity profile on the detector through a multi-Gaussian interpolation, allowing the additional retrieval of the scattering signal
Magnetoelectric Effects on Composite Nano Granular Films
Employing a new experimental technique to measure magnetoelectric response
functions, we have measured the magnetoelectric effect in composite films of
nano granular metallic iron in anatase titanium dioxide at temperatures below
50 K. A magnetoelectric resistance is defined as the ratio of a transverse
voltage to bias current as a function of the magnetic field. In contrast to the
anomalous Hall resistance measured above 50 K, the magnetoelectic resistance
below 50 K is significantly larger and exhibits an even symmetry with respect
to magnetic field reversal . The measurement technique required
attached electrodes in the plane of the film composite in order to measure
voltage as a function of bias current and external magnetic field. To our
knowledge, the composite films are unique in terms of showing magnetoelectric
effects at low temperatures, 50 K, and anomalous Hall effects at high
temperatures, 50 K.Comment: ReVTeX, 2 figures, 3 page
Highly-functionalised difluorinated cyclohexane polyols via the Diels–Alder reaction : regiochemical control via the phenylsulfonyl group
A difluorinated dienophile underwent cycloaddition reactions with a range of furans to afford cycloadducts whichcould be processed regio- and stereoselectively via episulfonium ions, generated by the reaction between their alkenyl groups and phenylsulfenyl chloride. The oxabicyclic products were oxidised to the phenylsulfonyl level and ring opened via E1CB or reductive desulfonative pathways to afford, ultimately, difluorinated cyclohexene or cyclohexane polyols
Recommended from our members
Secondary structure assignment that accurately reflects physical and evolutionary characteristics.
RIGHTS : This article is licensed under the BioMed Central licence at http://www.biomedcentral.com/about/license which is similar to the 'Creative Commons Attribution Licence'. In brief you may : copy, distribute, and display the work; make derivative works; or make commercial use of the work - under the following conditions: the original author must be given credit; for any reuse or distribution, it must be made clear to others what the license terms of this work are.BACKGROUND: Secondary structure is used in hierarchical classification of protein structures, identification of protein features, such as helix caps and loops, for fold recognition, and as a precursor to ab initio structure prediction. There are several methods available for assigning secondary structure if the three-dimensional structure of the protein is known. Unfortunately they differ in their definitions, particularly in the exact positions of the termini. Additionally, most existing methods rely on hydrogen bonding, which means that important secondary structural classes, such as isolated beta-strands and poly-proline helices cannot be identified as they do not have characteristic hydrogen-bonding patterns. For this reason we have developed a more accurate method for assigning secondary structure based on main chain geometry, which also allows a more comprehensive assignment of secondary structure. RESULTS: We define secondary structure based on a number of geometric parameters. Helices are defined based on whether they fit inside an imaginary cylinder: residues must be within the correct radius of a central axis. Different types of helices (alpha, 3(10) or pi) are assigned on the basis of the angle between successive peptide bonds. beta-strands are assigned based on backbone dihedrals and with alternating peptide bonds. Thus hydrogen bonding is not required and beta-strands can be within a parallel sheet, antiparallel sheet, or can be isolated. Poly-proline helices are defined similarly, although with three-fold symmetry. CONCLUSION: We find that our method better assigns secondary structure than existing methods. Specifically, we find that comparing our methods with those of others, amino-acid trends at helix caps are stronger, secondary structural elements less likely to be concatenated together and secondary structure guided sequence alignment is improved. We conclude, therefore, that secondary structure assignments using our method better reflects physical and evolutionary characteristics of proteins. The program is available from http://www.bioinf.man.ac.uk/~lovell/segno.shtml
- …