Synthesis of Porous Biomimetic Composites: A Sea Urchin Skeleton Used as a Template

The paper presents an original method for the template synthesis of biomimetic porous composites using polyferrophenylsiloxane (PFPS) and the skeleton of the sea urchin Strongylocentrotus intermedius as a structuring template. The study aimed to form an organosilicon base of a composite with an inverted structure relative to the original structure of the sea urchin shell with a period of structure movement of about 20 µm and ceramic composites fabrication with the silicate base with an average pore size distribution of about 10 μm obtained by the reaction of PFPS with the inorganic base of the sea urchin test under conditions of calcination at 1000 °C followed by acid etching. The composition and morphology of the obtained composites were investigated by IR, XRD, XPS, EDX, and SEM techniques and by mercury porosimetry; the parameters of the porous structures depend on the selected methods of their synthesis. The proposed method is of fundamental importance for developing methods for the chemical synthesis of new biomimetics with a unique porosity architecture based on environmentally friendly natural raw materials for a vast practical application

Moss-like Hierarchical Architecture Self-Assembled by Ultrathin Na2Ti3O7 Nanotubes: Synthesis, Electrical Conductivity, and Electrochemical Performance in Sodium-Ion Batteries

Nanocrystalline layer-structured monoclinic Na2Ti3O7 is currently under consideration for usage in solid state electrolyte applications or electrochemical devices, including sodium-ion batteries, fuel cells, and sensors. Herein, a facile one-pot hydrothermal synthetic procedure is developed to prepare self-assembled moss-like hierarchical porous structure constructed by ultrathin Na2Ti3O7 nanotubes with an outer diameter of 6–9 nm, a wall thickness of 2–3 nm, and a length of several hundred nanometers. The phase and chemical transformations, optoelectronic, conductive, and electrochemical properties of as-prepared hierarchically-organized Na2Ti3O7 nanotubes have been studied. It is established that the obtained substance possesses an electrical conductivity of 3.34 × 10−4 S/cm at room temperature allowing faster motion of charge carriers. Besides, the unique hierarchical Na2Ti3O7 architecture exhibits promising cycling and rate performance as an anode material for sodium-ion batteries. In particular, after 50 charge/discharge cycles at the current loads of 50, 150, 350, and 800 mA/g, the reversible capacities of about 145, 120, 100, and 80 mA∙h/g, respectively, were achieved. Upon prolonged cycling at 350 mA/g, the capacity of approximately 95 mA∙h/g at the 200th cycle was observed with a Coulombic efficiency of almost 100% showing the retention as high as 95.0% initial storage. At last, it is found that residual water in the un-annealed nanotubular Na2Ti3O7 affects its electrochemical properties

Enhancing Lithium and Sodium Storage Properties of TiO2(B) Nanobelts by Doping with Nickel and Zinc

Nickel- and zinc-doped TiO2(B) nanobelts were synthesized using a hydrothermal technique. It was found that the incorporation of 5 at.% Ni into bronze TiO2 expanded the unit cell by 4%. Furthermore, Ni dopant induced the 3d energy levels within TiO2(B) band structure and oxygen defects, narrowing the band gap from 3.28 eV (undoped) to 2.70 eV. Oppositely, Zn entered restrictedly into TiO2(B), but nonetheless, improves its electronic properties (Eg is narrowed to 3.21 eV). The conductivity of nickel- (2.24 × 10−8 S·cm−1) and zinc-containing (3.29 × 10−9 S·cm−1) TiO2(B) exceeds that of unmodified TiO2(B) (1.05 × 10−10 S·cm−1). When tested for electrochemical storage, nickel-doped mesoporous TiO2(B) nanobelts exhibited improved electrochemical performance. For lithium batteries, a reversible capacity of 173 mAh·g−1 was reached after 100 cycles at the current load of 50 mA·g−1, whereas, for unmodified and Zn-doped samples, around 140 and 151 mAh·g−1 was obtained. Moreover, Ni doping enhanced the rate capability of TiO2(B) nanobelts (104 mAh·g−1 at a current density of 1.8 A·g−1). In terms of sodium storage, nickel-doped TiO2(B) nanobelts exhibited improved cycling with a stabilized reversible capacity of 97 mAh·g−1 over 50 cycles at the current load of 35 mA·g−1